Evaluation of Deep Thermal Rehabilitation System Using Resonant Cavity Applicator During Knee Experiments.

This paper evaluates experiments on the knee using a new heating rehabilitation system. For effective thermal rehabilitation of osteoarthritis, it is necessary to heat the deep tissue inside the knee joint. Our new rehabilitation system is based on the re-entrant type resonant cavity applicator which was developed for deep hyperthermia treatment in our previous studies. Our experimental results using agar phantoms showed our heating system is able to heat the deep tissue inside the knee without physically contacting the surface skin. In this study, we developed a prototype applicator and experimented on a healthy human subject's knee under clinical conditions. To evaluate heating performance, we conducted heating experiments with our resonant cavity applicator and a conventional microwave diathermy system and compared the results. The experimental results of temperature increase distributions inside the human body were estimated by ultrasound imaging techniques. The estimated results from our knee experiments show that our heating system is able to heat knee tissue more deeply than microwave diathermy systems can and thus would be effective for deep thermal rehabilitation applications in clinics.

Mid-flexion laxity is greater after posterior-stabilised total knee replacement than with cruciate-retaining procedures: A computer navigation study.

There are several methods for evaluating stability of the joint during total knee replacement (TKR). Activities of daily living demand mechanical loading to the knee joint, not only in full extension, but also in mid-flexion. The purpose of this study was to compare the varus-valgus stability throughout flexion in knees treated with either cruciate-retaining or posterior-stabilised TKR, using an intra-operative navigation technique. A total of 34 knees underwent TKR with computer navigation, during which the investigator applied a maximum varus-valgus stress to the knee while steadily moving the leg from full extension to flexion both before and after prosthetic implantation. The femorotibial angle was measured simultaneously by the navigation system at every 10° throughout the range of movement. It was found that posterior-stabilised knees had more varus-valgus laxity than cruciate-retaining knees at all angles examined, and the differences were statistically significant at 10° (p = 0.0093), 20° (p = 0.0098) and 30° of flexion (p = 0.0252).

SAR analysis of the improved resonant cavity applicator with electrical shield and water bolus for deep tumors by a 3-D FEM.

This paper discusses the improvements of the re-entrant resonant cavity applicator, such as an electromagnetic shield and a water bolus for concentrating heating energy on deep tumors in an abdominal region of the human body. From our previous study, it was found that the proposed heating system using the resonant cavity applicator, was effective for heating brain tumors and also for heating other small objects. However, when heating the abdomen with the developed applicator, undesirable areas such as the neck, arm, hip and breast were heated. Therefore, we have improved the resonant cavity applicator to overcome these problems. First, a cylindrical shield made of an aluminum alloy was installed inside the cavity. It was designed to protect non-tumorous areas from concentrated electromagnetic fields. Second, in order to concentrate heating energy on deep tumors inside the human body, a water bolus was installed around the body. Third, the length of the lower inner electrode was changed to control the heating area. In this study, to evaluate the effectiveness of the proposed methods, specific absorption rate (SAR) distributions were calculated by FEM with the 3-D anatomical human body model reconstructed from MRI images. From these results, it was confirmed that the improved heating system was effective to non-invasively heat abdominal deep tumors.

A new heating method with dielectric bolus using resonant cavity applicator for brain tumors.

In this paper, we discuss a new method of controlling heating location in the proposed resonant cavity applicator. A dielectric bolus was used to non-invasively treat brain tumors. We have already confirmed that our heating system using resonant cavity is useful to non-invasively heat brain tumors. In order to heat tumors occurring at various locations, it is necessary to control the heating area with our heating system. First, we presented the proposed heating method and a phantom model to calculate temperature distributions. The results of temperature distributions were discussed. Second, a 3-D human head model constructed from 2-D MRI images was presented. The results of specific absorption rate distributions were discussed. From these results, it was found that the proposed heating method was useful to non-invasively treat brain tumors.

Defining the load bearing axis of the lower extremity obtained from anterior-posterior digital radiographs of the whole limb in stance.

OBJECTIVE: The purpose of this study was to evaluate the reliability of inter-and intra-observer assessments of the mechanical alignment of the lower extremities with digitally computed radiographs of an anterior-posterior view of the whole leg using a new computer-assisted method. METHOD: Load bearing axis deviation of the lower extremities was quantitatively measured by three examiners in 105 knees of 73 subjects who had osteoarthritis of the knee with a Kellgren-Lawrence grade of 1 or more. A line representing the load bearing axis was drawn from the center of the femoral head to the center of the ankle and the alignment of the leg was assessed by measuring the width of the proximal tibia and the perpendicular distance from the middle of the proximal tibial condyle to the load bearing axis (Fujifilm OP-A). A ratio of the values was calculated and expressed as a percentage. RESULTS: The inter-observer mean difference was 2.9 % (SD, 2.7), and the intra-observer mean difference was 2.1% (SD, 2.2). The mean intraclass correlation coefficient (ICC) for inter-observer trials was 0.96; that for intra-observer trials was 0.99. CONCLUSION: Our computer-assisted method was reproducible, and should be considered an alternative method for the measurement of the alignment of the whole leg.

Washout measurement of radioisotope implanted by radioactive beams in the rabbit.

Washout of 10C and 11C implanted by radioactive beams in brain and thigh muscle of rabbits was studied. The biological washout effect in a living body is important in the range verification system or three-dimensional volume imaging in heavy ion therapy. Positron emitter beams were implanted in the rabbit and the annihilation gamma-rays were measured by an in situ positron camera which consisted of a pair of scintillation cameras set on either side of the target. The ROI (region of interest) was set as a two-dimensional position distribution and the time-activity curve of the ROI was measured. Experiments were done under two conditions: live and dead. By comparing the two sets of measurement data, it was deduced that there are at least three components in the washout process. Time-activity curves of both brain and thigh muscle were clearly explained by the three-component model analysis. The three components ratios (and washout half-lives) were 35% (2.0 s), 30% (140 s) and 35% (10 191 s) for brain and 30% (10 s), 19% (195 s) and 52% (3175 s) for thigh muscle. The washout effect must be taken into account for the verification of treatment plans by means of positron camera measurements.

Enhanced efficacy of nilvadipine in hypertensives whose raised ambulatory blood pressure is sustained during sleep.

This study was designed to clarify the relationship between the antihypertensive effects of the calcium antagonist nilvadipine, and circadian changes in blood pressure. Based on measurements using an ambulatory blood pressure monitoring system (ABPM), 17 outpatients with untreated essential hypertension were divided into two groups: a sustained hypertensive group (with a fall in blood pressure during sleep < 10%, n = 7) and a waking time hypertensive group (with a fall in blood pressure during sleep > or = 10%, n = 10). During treatment with nilvadipine (8 mg/day, > or = 2 weeks), patients were reexamined by ABPM. The antihypertensive effect of nilvadipine was significantly and negatively correlated with the night time fall in blood pressure: this effect was significantly greater in the sustained hypertensive group than in the waking time hypertensive group. These data suggest that the long acting calcium antagonist nilvadipine has more potent antihypertensive effects in patients with sustained hypertension ("nondippers") than in those whose hypertension lessens during sleep ("dippers").