Electrochemical Li+ Insertion/Extraction Reactions at LiPON/Epitaxial Graphene Interfaces.

Redox reactions of the Li+ insertion/extraction from one to two interlayers of graphene (Gr) on area-defined single-crystalline SiC substrates are investigated using lithium phosphorus oxynitride glass (LiPON) as the solid-state electrolyte. Unlike an organic liquid electrolyte, this glassy electrolyte does not induce a reduction current and excludes the desolvation reaction of Li+. Gr electrodes with less than two Gr layers show a single reduction peak and one or two oxidation peaks below +0.21 V (vs Li+/Li), differing distinctly from those of graphite and multilayer Gr, which display multiple peaks (multiple stage transitions). However, this finding aligns with the conventional understanding that graphite stage structure transitions proceed with stepwise increases or decreases in the number of Gr layers between adjacent Li-inserted interlayers. Cyclic voltammetry measurements indicate the presence of surface capacity due to Li+ adsorption/desorption at the LiPON/Gr interface. Moreover, Li+ insertion and extraction induce different charge transfer resistances at the level of a single interlayer. These sensitive measurements are achieved using high-quality epitaxial Gr and LiPON electrolyte, which prevent the formation of a solid electrolyte interphase and the desolvation reaction of Li+. Similar measurements using bilayer Gr produced by chemical vapor deposition coupled with a Gr transfer method and an ethylene carbonate/dimethyl carbonate liquid electrolyte are not reliable. Thus, the proposed method is effective for electrochemical measurement of Gr electrodes with a controlled number of layers.

Fabrication of Oxide-Based All-Solid-State Batteries by a Sintering Process Based on Function Sharing of Solid Electrolytes.

Garnet-type Li7La3Zr2O12 (LLZ) has advantages of stability with Li metal and high Li+ ionic conductivity, achieving 1 × 10-3 S cm-1, but it is prone to react with electrode active materials during the sintering process. LISICON-type Li3.5Ge0.5V0.5O4 (LGVO) has the advantage of less reactivity with the electrode active material during the sintering process, but its ionic conductivity is on the order of 10-5 S cm-1. In this study, these two solid electrolytes are combined as a multilayer solid electrolyte sheet, where 2 µm thick LGVO films are coated on LLZ sheets to utilize the advantages of these two solid electrolytes. These two solid electrolytes adhere well through Ge diffusion without significant interfacial resistance. The LLZ-LGVO multilayer is combined with a LiCoO2 positive electrode and a lithium metal anode through annealing at 700 °C. The resultant all-solid-state battery can undergo repeated charge-discharge reactions for over 100 cycles at 25 or 60 °C. The LGVO coating suppresses the increases in the resistance from the solid electrolyte and interfacial resistance induced by annealing by ca. 1/40. As with sulfide-based all-solid-state batteries, function sharing of solid electrolytes will be a promising method for developing advanced oxide-based all-solid-state batteries through a sintering process.

Tracer diffusion coefficients of Li+ ions in c-axis oriented LixCoO2 thin films measured by secondary ion mass spectrometry.

Lithium diffusion is a key factor in determining the charge/discharge rate of Li-ion batteries. Herein, we study the tracer diffusion coefficient (D*) of lithium ions in the c-axis oriented LiCoO2 thin film using secondary ion mass spectrometry (SIMS). We applied a step-isotope-exchange method to determine D* in the Li-extracted LixCoO2. The observed values of D* ranged from 2 × 10-12 to 3 × 10-17 cm2 s-1 depending on the compositions in the range of 0.4 < x < 1.0. Approaching the stoichiometric composition (x = 1.0), D* decreases steeply to the minimum, which can be explained by the vacancy diffusion mechanism. Electrochemically determined diffusion coefficients corrected by thermodynamic factors are found to be in good agreement with D* determined by our method, over a wide range of compositions. The c-axis diffusion was explained by the migration of Li+ ions from one layer to another through additional diffusion channels, such as antiphase boundaries and a pair of Li antisite and oxygen vacancies in cobalt oxide layers.