Thermoelectric Property in Orthorhombic-Domained SnSe Film.

Single-crystal SnSe exhibits extremely high thermoelectric properties, and fabrication of SnSe films is promising for practical application and basic research on properties. However, the high thermoelectric properties have not yet been reported in SnSe films and their thermoelectric properties and nanostructure have not yet been analyzed in detail. In the present study, a-axis-oriented epitaxial SnSe films were prepared to discuss the thermoelectric properties of the SnSe films. While the electrical conductivity of the films was orders of magnitude smaller than that in the single crystals at room temperature, surprisingly, the thermoelectric property (power factor) of the films was slightly higher than that in the single crystals at high temperatures (∼300 °C). The SnSe films contained orthorhombic domain boundaries with a spacing of several hundred nanometers. The orthorhombic domain boundaries caused carrier scattering and degraded the mobility of the films at room temperature, but their effect decreased with increasing temperature. Thus, the carrier scattering at domain boundaries results in characteristic temperature dependence of thermoelectric properties in the SnSe films. High thermoelectric properties at high temperatures were successfully achieved in the SnSe films in spite of the existence of domain boundaries, demonstrating the possibility of high-performance of SnSe thermoelectric films.

Chalcopyrite ZnSnSb2: A Promising Thermoelectric Material.

Ternary compounds with a tetragonal chalcopyrite structure, such as CuGaTe2, are promising thermoelectric (TE) materials. It has been demonstrated in various chalcopyrite systems, including compounds with quaternary chalcopyrite-like structures, that the lattice parameter ratio, c/ a, being exactly 2.00 to have a pseudo-cubic structure is key to increase the degeneracy at the valence band edge and ultimately achieve high TE performance. Considering the fact that ZnSnSb2 with a chalcopyrite structure is reported to have c/ a close to 2.00, it is expected to have multiple valence bands leading to a high p-type zT. However, there are no complete investigations on the high temperature TE properties of ZnSnSb2 mainly because of the difficulty of obtaining a single-phase ZnSnSb2. In the present study, pure ZnSnSb2 samples with no impurities are synthesized successfully using a Sn flux-based method and TE properties are characterized up to 585 K. Transport properties and thermal analysis indicate that the structure of ZnSnSb2 remains chalcopyrite with no order-disorder transition and clearly show that ZnSnSb2 can be made to exhibit a high zT in the low-to-mid temperature range through further optimization.

Proton-Driven Intercalation and Ion Substitution Utilizing Solid-State Electrochemical Reaction.

The development of an unconventional synthesis method has a large potential to drastically advance materials science. In this research, a new synthesis method based on a solid-state electrochemical reaction was demonstrated, which can be made available for intercalation and ion substitution. It was referred to as proton-driven ion introduction (PDII). The protons generated by the electrolytic dissociation of hydrogen drive other monovalent cations along a high electric field in the solid state. Utilizing this mechanism, Li+, Na+, K+, Cu+, and Ag+ were intercalated into a layered TaS2 single crystal while maintaining high crystallinity. This liquid-free process of ion introduction allows the application of high voltage around several kilovolts to the sample. Such a high electric field strongly accelerates ion substitution. Actually, compared to conventional solid-state reaction, PDII introduced 15 times the amount of K into Na super ionic conductor (NASICON)-structured Na3-xKxV2(PO4)3. The obtained materials exhibited a thermodynamically metastable phase, which has not been reported so far. This concept and idea for ion introduction is expected to form new functional compounds and/or phases.

Formation of metastable phases in Zr-ion-irradiated Al2O3 upon thermal annealing.

Formation of metastable phases in Zr-ion-irradiated corundum alumina (Al2O3) upon thermal annealing was examined using transmission electron microscopy. A metastable cubic spinel phase was formed in the topmost layer of the as-irradiated microstructure. During thermal annealing at temperatures ranging from 1073 to 1273 K, this spinel layer grew in extent via an unusual corundum-to-spinel phase transformation. A normal spinel-to-corundum phase transformation was observed at post-irradiation annealing temperatures greater than 1473 K. In addition, ZrO2 nanocrystals embedded in α-Al2O3 were observed to form at these higher temperatures. High-resolution transmission electron microscopy observations and electron diffraction experiments revealed that the structure of the ZrO2 precipitates observed in this study are consistent with a high-pressure metastable orthorhombic phase of ZrO2 known as the Ortho-I phase.

Helium Irradiation and Implantation Effects on the Structure of Amorphous Silicon Oxycarbide.

Despite recent interest in amorphous ceramics for a variety of nuclear applications, many details of their structure before and after irradiation/implantation remain unknown. Here we investigated the short-range order of amorphous silicon oxycarbide (SiOC) alloys by using the atomic pair-distribution function (PDF) obtained from electron diffraction. The PDF results show that the structure of SiOC alloys are nearly unchanged after both irradiation up to 30 dpa and He implantation up to 113 at%. TEM characterization shows no sign of crystallization, He bubble or void formation, or segregation in all irradiated samples. Irradiation results in a decreased number of Si-O bonds and an increased number of Si-C and C-O bonds. This study sheds light on the design of radiation-tolerant materials that do not experience helium swelling for advanced nuclear reactor applications.

Discovery of the Pt-Based Superconductor LaPt5As.

A novel superconductor, LaPt5As, which exhibits a new crystal structure was discovered by high-pressure synthesis using a Kawai-type apparatus. A superconducting transition temperature was observed at 2.6 K. Depending on the sintering pressure, LaPt5As has superconducting and non-superconducting phases with different crystal structures. A sintering pressure of around 10 GPa is effective to form single-phase superconducting LaPt5As. This material has a very unique crystal structure with an extremely long c lattice parameter of over 60 Å and corner-sharing tetrahedrons composed of network-like Pt layers. Density functional theory calculations have suggested that the superconducting current flows through these Pt layers. Also, this unique layered structure characteristic of LaPt5As is thought to play a key role in the emergence of superconductivity. Furthermore, due to a stacking structure which makes up layers, various structural modifications for the LaPt5As family are conceivable. Since such a high-pressure synthesis using a Kawai-type apparatus is not common in the field of materials science, there is large room for further exploration of unknown phases which are induced by high pressure in various materials.

Bottom-up nanostructured bulk silicon: a practical high-efficiency thermoelectric material.

The effectiveness of thermoelectric (TE) materials is quantified by the dimensionless figure of merit (zT). An ideal way to enhance zT is by scattering phonons without scattering electrons. Here we show that, using a simple bottom-up method, we can prepare bulk nanostructured Si that exhibits an exceptionally high zT of 0.6 at 1050 K, at least three times higher than that of the optimized bulk Si. The nanoscale precipitates in this material connected coherently or semi-coherently with the Si matrix, effectively scattering heat-carrying phonons without significantly influencing the material's electron transport properties, leading to the high zT.

Nanoscale engineering of radiation tolerant silicon carbide.

Radiation tolerance is determined by how effectively the microstructure can remove point defects produced by irradiation. Engineered nanocrystalline SiC with a high-density of stacking faults (SFs) has significantly enhanced recombination of interstitials and vacancies, leading to self-healing of irradiation-induced defects. While single crystal SiC readily undergoes an irradiation-induced crystalline to amorphous transformation at room temperature, the nano-engineered SiC with a high-density of SFs exhibits more than an order of magnitude increase in radiation resistance. Molecular dynamics simulations of collision cascades show that the nano-layered SFs lead to enhanced mobility of interstitial Si atoms. The remarkable radiation resistance in the nano-engineered SiC is attributed to the high-density of SFs within nano-sized grain structures that significantly enhance point defect annihilation.

The fabrication of Ni quantum cross devices with a 17 nm junction and their current-voltage characteristics.

Quantum cross (QC) devices which consist of two Ni thin films deposited on polyethylene naphthalate substrates with their edges crossing have been fabricated and their current-voltage characteristics have been investigated. The cross-sectional area between the two Ni electrodes, which was obtained without the use of electron-beam or optical lithography, can be as small as 17 nm x 17 nm. We have successfully obtained ohmic current-voltage characteristics, which show good agreement with calculation results within the framework of the modified Anderson model. The calculated results also predict a high switching ratio in excess of 100,000:1 for QC devices having the molecule sandwiched between the Ni electrodes. This indicates that QC devices having the molecule can be expected to have potential application in novel switching devices.

Radiation-induced amorphization resistance and radiation tolerance in structurally related oxides.

Ceramics destined for use in hostile environments such as nuclear reactors or waste immobilization must be highly durable and especially resistant to radiation damage effects. In particular, they must not be prone to amorphization or swelling. Few ceramics meet these criteria and much work has been devoted in recent years to identifying radiation-tolerant ceramics and the characteristics that promote radiation tolerance. Here, we examine trends in radiation damage behaviour for families of compounds related by crystal structure. Specifically, we consider oxides with structures related to the fluorite crystal structure. We demonstrate that improved amorphization resistance characteristics are to be found in compounds that have a natural tendency to accommodate lattice disorder.

Structural relaxation of amorphous silicon carbide.

We have examined amorphous structures of silicon carbide (SiC) using both transmission electron microscopy and a molecular-dynamics approach. Radial distribution functions revealed that amorphous SiC contains not only heteronuclear (Si-C) bonds but also homonuclear (Si-Si and C-C) bonds. The ratio of heteronuclear to homonuclear bonds was found to change upon annealing, suggesting that structural relaxation of the amorphous SiC occurred. Good agreement was obtained between the simulated and experimentally measured radial distribution functions.