ABSTRACT
A multilayered smart epoxy coating for corrosion prevention of carbon steel was developed and characterized. Toward this direction, as a first step, zinc-aluminum nitrate-layered double hydroxide (Zn/Al LDH) was synthesized using the hydrothermal crystallization technique and then loaded with dodecylamine (DOD), which was used as an inhibitor (pH-sensitive). Similarly, the synthesis of the urea-formaldehyde microcapsules (UFMCs) has been carried out using the in-situ polymerization method, and then the microcapsules (LAUFCs) were encapsulated with linalyl acetate (LA) as a self-healing agent. Finally, the loaded Zn/Al LDH (3 wt %) and modified LAUFCs (5 wt %) were reinforced into an epoxy matrix to develop a double-layer coating (DL-EP). For an exact comparison, pre-layer epoxy coatings comprising 3 wt % of the loaded Zn/Al LDH (referred to as LDH-EP), top-layer epoxy coatings comprising 5 wt % linalyl acetate urea-formaldehyde microcapsules (referred to as UFMLA COAT), and a blank epoxy coating (reference coating) were also developed. The developed epoxy coatings were characterized using various techniques such as XRD, XPS, BET, TGA, FTIR, EIS, etc. Electrochemical tests performed on the synthesized coatings indicate that the DL-EP demonstrates improved self-healing properties compared to LDH-EP and UFMLA COAT.
ABSTRACT
This work focuses on the synthesis and characterization of polymeric smart self-healing coatings. A comparison of structural, thermal, and self-healing properties of two different polymeric coatings comprising distinct self-healing agents (tung oil and linalyl acetate) is studied to elucidate the role of self-healing agents in corrosion protection. Towards this direction, urea-formaldehyde microcapsules (UFMCs) loaded with tung oil (TMMCs) and linalyl acetate (LMMCs) were synthesized using the in-situ polymerization method. The synthesis of both LMMCs and TMMCs under identical experimental conditions (900 rpm, 55 °C) has resulted in a similar average particle size range (63-125 µm). The polymeric smart self-healing coatings were developed by reinforcing a polymeric matrix separately with a fixed amount of LMMCs (3 wt.% and 5 wt.%), and TMMCs (3 wt.% and 5 wt.%) referred to as LMCOATs and TMCOATs, respectively. The development of smart coatings (LMCOATs and TMCOATs) contributes to achieving decent thermal stability up to 450 °C. Electrochemical impedance spectroscopy (EIS) analysis indicates that the corrosion resistance of smart coatings increases with increasing concentration of the microcapsules (TMMCs, LMMCs) in the epoxy matrix reaching ~1 GΩ. As a comparison, LMCOATs containing 5 wt.% LMMCs demonstrate the best stability in the barrier properties than other developed coatings and can be considered for many potential applications.
ABSTRACT
Membrane technologies are used intensively for desalination and wastewater treatment. Water filtration using ceramic membranes exhibited high performance compared with polymeric membranes due to various properties such as high resistance to fouling, permeability, rejection rate, and chemical stability. Recently, the performance of nanocomposite ceramic membranes was improved due to the development in nanotechnology. This article focusses on the development of porous ceramic membranes and nanomaterial functionalized ceramic membranes for water filtration applications. At the beginning, various fabrication methods of ceramic membranes were described, and the effect of surface modification techniques on the membrane intrinsic properties was reviewed. Then, the performance of nanoparticles functionalized ceramic membranes was evaluated in terms of physicochemical properties, rejection rate, and water permeability. This work can help new entrants and established researchers to become familiar with the current challenges and developments of nanoparticle-incorporated ceramic membranes for water filtration applications.
