New 3D Vortex Microfluidic System Tested for Magnetic Core-Shell Fe3O4-SA Nanoparticle Synthesis.

This study's main objective was to fabricate an innovative three-dimensional microfluidic platform suitable for well-controlled chemical syntheses required for producing fine-tuned nanostructured materials. This work proposes using vortex mixing principles confined within a 3D multilayered microreactor to synthesize magnetic core-shell nanoparticles with tailored dimensions and polydispersity. The newly designed microfluidic platform allowed the simultaneous obtainment of Fe3O4 cores and their functionalization with a salicylic acid shell in a short reaction time and under a high flow rate. Synthesis optimization was also performed, employing the variation in the reagents ratio to highlight the concentration domains in which magnetite is mainly produced, the formation of nanoparticles with different diameters and low polydispersity, and the stability of colloidal dispersions in water. The obtained materials were further characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM), with the experimental results confirming the production of salicylic acid-functionalized iron oxide (Fe3O4-SA) nanoparticles adapted for different further applications.

Fabrication and Advanced Imaging Characterization of Magnetic Aerogel-Based Thin Films for Water Decontamination.

Aerogels have emerged as appealing materials for various applications due to their unique features, such as low density, high porosity, high surface area, and low thermal conductivity. Aiming to bring the advantages of these materials to the environmental field, this study focuses on synthesizing magnetic silica aerogel-based films suitable for water decontamination. In this respect, a novel microfluidic platform was created to obtain core-shell iron oxide nanoparticles that were further incorporated into gel-forming precursor solutions. Afterward, dip-coating deposition was utilized to create thin layers of silica-based gels, which were further processed by 15-hour gelation time, solvent transfer, and further CO2 desiccation. A series of physicochemical analyses (XRD, HR-MS FT-ICR, FT-IR, TEM, SEM, and EDS) were performed to characterize the final films and intermediate products. The proposed advanced imaging experimental model for film homogeneity and adsorption characteristics confirmed uniform aerogel film deposition, nanostructured surface, and ability to remove pesticides from contaminated water samples. Based on thorough investigations, it was concluded that the fabricated magnetic aerogel-based thin films are promising candidates for water decontamination and novel solid-phase extraction sample preparation.

Hemp Seeds (Cannabis sativa L.) as a Valuable Source of Natural Ingredients for Functional Foods-A Review.

Hemp (Cannabis sativa L.) has experienced a significant resurgence in popularity, and global interest in diversifying its use in various industries, including the food industry, is growing. Therefore, due to their exceptional nutritional value, hemp seeds have recently gained increasing interest as a valuable ingredient for obtaining high-quality foods and dietary supplements. Hemp seeds stand out for their remarkable content of quality proteins, including edestin and albumin, two distinct types of proteins that contribute to exceptional nutritional value. Hemp seeds are also rich in healthy lipids with a high content of polyunsaturated fatty acids, such as linoleic acid (omega-6), alpha-linolenic acid (omega-3), and some vitamins (vitamins E, D, and A). Polyphenols and terpenoids, in particular, present in hemp seeds, provide antimicrobial, antioxidant, and anti-inflammatory properties. This review examines the scientific literature regarding hemp seeds' physicochemical and nutritional characteristics. The focus is on those characteristics that allow for their use in the food industry, aiming to transform ordinary food products into functional foods, offering additional benefits for the body's health. Innovating opportunities to develop healthy, nutritionally superior food products are explored by integrating hemp seeds into food processes, promoting a balanced and sustainable diet.

The Antioxidant and Hepatoprotective Potential of Berberine and Silymarin on Acetaminophen Induced Toxicity in Cyprinus carpio L.

Berberine (BBR) and silymarin (SM) are natural compounds extracted from plants known for their antioxidant and chemoprotective effects on the liver. The present study aimed to investigate the beneficial properties of BBR and SM and the association of BBR with SM on liver function using fish as "in vivo" models. Moreover, the study investigated their hepatoprotective role after acetaminophen (APAP) exposure. For this purpose, the fish (N = 360; 118.4 ± 11.09 g) were fed with control or experimental diets for 9 weeks. In the experimental diets, the feed was supplemented with either SM (1 g/kg feed), BBR (100 and 200 mg/kg feed), or a combination of BBR with SM (SM 1 g/kg feed + BBR 100 mg/kg feed and, respectively, SM 1 g/kg feed + BBR 200 mg/kg feed). After the feeding trial, seven fish from each tank were randomly selected and exposed to a single APAP dose. The selected serum biochemical markers, oxidative stress markers, and lysozyme activity were used to evaluate the efficiency of the supplements on carp's health profile, particularly regarding the hepatopancreas function. Our results showed that the inclusion of SM and BBR (either as a single or in combination) reduced the serum contents of total cholesterol, triglyceride, and alanine transaminase. An increase in the high-density cholesterol was observed after the administration of BBR or BBR in association with SM. Both supplements showed hepatoprotective activity against APAP-induced hepatotoxicity, especially BBR. The ameliorative effects of SM (1 g) in association with BBR (100 mg) were highlighted by the modulation of the nonspecific immune system and oxidative stress alleviation after APAP exposure.

Novel Bovine Serum Albumin-Decorated-Nanostructured Lipid Carriers Able to Modulate Apoptosis and Cell-Cycle Response in Ovarian, Breast, and Colon Tumoral Cells.

A novel nanoscale approach was developed for the improved cellular internalization of hybrid bovine serum albumin-lipid nanocarriers loaded with piperine (NLC-Pip-BSA) in different tumor cells. The effect of the BSA-targeted-NLC-Pip and untargeted-NLC-Pip on the viability, proliferation, and levels of cell-cycle damage and apoptosis in the colon (LoVo), ovarian (SKOV3) and breast (MCF7) adenocarcinoma cell lines was comparatively discussed. NLCs were characterized concerning particle size, morphology, zeta potential, phytochemical encapsulation efficiency, ATR-FTIR, and fluorescence spectroscopy. The results showed that NLC-Pip-BSA showed a mean size below 140 nm, a zeta potential of -60 mV, and an entrapment efficiency of 81.94% for NLC-Pip and 80.45% for NLC-Pip-BSA. Fluorescence spectroscopy confirmed the coating of the NLC with the albumin. By MTS and RTCA assays, NLC-Pip-BSA showed a more pronounced response against the LoVo colon cell line and MCF-7 breast tumor cell lines than against the ovarian SKOV-3 cell line. Flow cytometry assay demonstrated that the targeted NLC-Pip had more cytotoxicity and improved apoptosis than the untargeted ones in MCF-7 tumor cells (p < 0.05). NLC-Pip caused a significant increase in MCF-7 breast tumor cell apoptosis of ~8X, while NLC-Pip-BSA has shown an 11-fold increase in apoptosis.

Low Release Study of Cefotaxime by Functionalized Mesoporous Silica Nanomaterials.

As a third-generation ß-lactam antibiotic, cefotaxime shows a broad-spectrum with Gram-positive and Gram-negative bacteria activity and is included in WHO's essential drug list. In order to obtain new materials with sustained release properties, the present research focuses on the study of cefotaxime absorption and desorption from different functionalized mesoporous silica supports. The MCM-41-type nanostructured mesoporous silica support was synthesized by sol-gel technique using a tetraethyl orthosilicate (TEOS) route and cetyltrimethylammonium bromide (CTAB) as a surfactant, at room temperature and normal pressure. The obtained mesoporous material (MCM-41 class) was characterized through nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), N2 absorption-desorption (BET) and Fourier transform infrared spectroscopy (FT-IR), proving a good micro-structured homogeneity (SEM images), a high surface area (BET, 1029 m2/g) correlated with high silanolic activity (Q3/Q4 peak ratio from 29Si MAS-NMR), and an expected uniform hexagonal structure (2-3 nm, HRTEM). In order to non-destructively link the antibiotic compound on the solid phase, MCM-41 was further functionalized in two steps: with aminopropyl trimethoxysilane (APTMS) and glutaraldehyde (GA). Three cefotaxime-loaded materials were comparatively studied for low release capacity: the reference material with adsorbed cefotaxime on MCM-41, MCM-41/APS (aminopropyl silyl surface functionalization) adsorbed cefotaxime material, and APTMS-GA bounded MCM-41-cefotaxime material. The slow-release profiles were obtained by using an on-flow modified HPLC system. A significant improved release capacity was identified in the case of MCM-41/APS/GA-cefotaxime due to the covalent surface grafting of the biological active compound, recommending this class of materials as an effective carrier of bioactive compounds in wound dressing, anti-biofilm coatings, advanced drugs, and other related applications.

Microwave-Assisted Sol-Gel Preparation of the Nanostructured Magnetic System for Solid-Phase Synthesis.

This work describes a new synthesis method for core-shell magnetite nanoparticles with a secondary silica shell, functionalized with a linker system (Fe3O4-PABA-SiO2-linker) using a microwave-assisted heating technique. The functionalized solid nanomaterial was used for the nanophase synthesis of peptides (Fmoc route) as a solid support. The co-precipitation method was selected to obtain magnetite nanoparticles and sol-gel technique for silica coating using a microwave-assisted (MW) procedure. The magnetic properties of the nanoparticle core offer the advantage of a quick and easy alternative for the magnetic separation of the product from the reaction mixture, facilitating all the intermediary washing and separation operations. The intermediate and final materials were analyzed by advanced characterization methods. The effectiveness of the nanophase peptide synthesis using this nanostructured material as solid support was demonstrated for a short peptide sequence.