ABSTRACT
l-Glutamate-N,N-diacetate (L-GLDA) was recently introduced in the United States (U.S.) market as a phosphate replacement in automatic dishwashing detergents (ADW). Prior to introduction, L-GLDA exhibited poor biodegradation in OECD 301B Ready Biodegradation Tests inoculated with sludge from U.S. wastewater treatment plants (WWTPs). However, OECD 303A Activated Sludge WWTP Simulation studies showed that with a lag period to allow for growth (40-50 days) and a solids retention time (SRT) that allows establishment of L-GLDA degraders (>15 days), significant biodegradation (>80% dissolved organic carbon removal) would occur. Corresponding to the ADW market launch, a study was undertaken to monitor changes in the ready biodegradability of L-GLDA using activated sludge samples from various U.S. WWTPs. Initially all sludge inocula showed limited biodegradation ability, but as market introduction progressed, both the rate and extent of degradation increased significantly. Within 22 months, L-GLDA was ready biodegradable using inocula from 12 WWTPs. In an OECD 303A study repeated 18 months post launch, significant and sustained carbon removal (>94%) was observed after a 29-day acclimation period. This study systematically documented field adaptation of a new consumer product chemical across a large geographic region and confirmed the ability of laboratory simulation studies to predict field adaptation.
Subject(s)
Acetates/pharmacology , Biodegradation, Environmental , Detergents/pharmacology , Glutamic Acid/analogs & derivatives , Microbial Consortia/drug effects , Microbial Consortia/physiology , Adaptation, Physiological/drug effects , Carbon/metabolism , Glutamic Acid/pharmacology , Sewage/microbiology , Waste Disposal, Fluid/methodsABSTRACT
Pure homologues of [1-14C] C12, C14, and C16 alcohols and the linear alcohol ethoxylates, AE [1-14C alkyl] C13E9 and C16E9 were tested in a batch-activated sludge die-away system to assess their biodegradation kinetics and to predict levels of free alcohol derived from AE biodegradation in treated effluent. First-order rates for primary biodegradation were similar for all alcohols (86-113 h(-1)) and were used to predict removal under typical treatment conditions. Predicted removals of fatty alcohols ranged from 99.76% to 99.85%, consistent with published field data. During the biodegradation of the AE homologues, lower than expected levels of fatty alcohol based upon the assumption that biodegradation occurs through central fission were observed. Rather than fatty alcohols, the major metabolites were polar materials resulting from omega oxidation of the alkyl chain prior to or concurrent with central cleavage. The amounts of free fatty alcohols that were formed from AEs in influent and escape into effluent were negligible due both to their rapid degradation and to the finding that formation of free alcohol through central cleavage is only a minor degradation pathway in activated sludge.
Subject(s)
Alcohols/analysis , Fatty Alcohols/analysis , Sewage/analysis , Algorithms , Biodegradation, Environmental , Biomass , Chromatography, Thin Layer , Isotope Labeling , Kinetics , Minerals/analysis , Solvents , Structure-Activity RelationshipABSTRACT
Batch activated-sludge die-away studies were conducted with various pure homologs to determine the effect of ethoxylate number and alkyl chain length on the kinetics of primary and ultimate biodegradation of linear alcohol ethoxylates. The 14C-(ethoxylate) homologs C14E1, C14E3, C14E6, and C14E9 were used to investigate the effect of ethoxylate number, and 14C-(ethoxylate) homologs C12E6, C14E6, and C16E6 were used to examine the effect of chain length. Activated sludge was dosed with a trace concentration (0.2 microM) of each homolog, and the disappearance of parent, formation of metabolites, production of 14CO2, and uptake into solids were monitored with time. Ethoxylate number had little effect on the first-order decay rates for primary biodegradation, which ranged from 61 to 78 h(-1). However, alkyl chain length had a larger effect, with the C16 chain-length homolog exhibiting a slower rate of parent decay (18 h(-1)) compared to its corresponding C12 and C14 homologs (61-69 h(-1)). Ethoxylate number affected the mechanism of biodegradation, with fission of the central ether bond to yield the corresponding fatty alcohol and (poly)ethylene glycol group increasing in dominance with increasing ethoxylate number. Based upon the measured rates of primary biodegradation, removal of parent during activated-sludge treatment was predicted to range between 99.7 and 99.8% for all homologs except C16E6, which had a predicted removal of 98.9%. Based upon the measured rates of ultimate biodegradation, removal of ethoxylate-containing metabolites was predicted to exceed 83% for all homologs. These predictions corresponded closely with previously published removal measurements in laboratory continuous activated-sludge systems and actual treatment plants.