Biodegradation Studies of Polyhydroxybutyrate and Polyhydroxybutyrate-co-Polyhydroxyvalerate Films in Soil.

Due to increased environmental pressures, significant research has focused on finding suitable biodegradable plastics to replace ubiquitous petrochemical-derived polymers. Polyhydroxyalkanoates (PHAs) are a class of polymers that can be synthesized by microorganisms and are biodegradable, making them suitable candidates. The present study looks at the degradation properties of two PHA polymers: polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-polyhydroxyvalerate (PHBV; 8 wt.% valerate), in two different soil conditions: soil fully saturated with water (100% relative humidity, RH) and soil with 40% RH. The degradation was evaluated by observing the changes in appearance, chemical signatures, mechanical properties, and molecular weight of samples. Both PHB and PHBV were degraded completely after two weeks in 100% RH soil conditions and showed significant reductions in mechanical properties after just three days. The samples in 40% RH soil, however, showed minimal changes in mechanical properties, melting temperatures/crystallinity, and molecular weight over six weeks. By observing the degradation behavior for different soil conditions, these results can pave the way for identifying situations where the current use of plastics can be replaced with biodegradable alternatives.

Predicting the Mechanical Response of Polyhydroxyalkanoate Biopolymers Using Molecular Dynamics Simulations.

Polyhydroxyalkanoates (PHAs) have emerged as a promising class of biosynthesizable, biocompatible, and biodegradable polymers to replace petroleum-based plastics for addressing the global plastic pollution problem. Although PHAs offer a wide range of chemical diversity, the structure-property relationships in this class of polymers remain poorly established. In particular, the available experimental data on the mechanical properties is scarce. In this contribution, we have used molecular dynamics simulations employing a recently developed forcefield to predict chemical trends in mechanical properties of PHAs. Specifically, we make predictions for Young's modulus, and yield stress for a wide range of PHAs that exhibit varying lengths of backbone and side chains as well as different side chain functional groups. Deformation simulations were performed at six different strain rates and six different temperatures to elucidate their influence on the mechanical properties. Our results indicate that Young's modulus and yield stress decrease systematically with increase in the number of carbon atoms in the side chain as well as in the polymer backbone. In addition, we find that the mechanical properties were strongly correlated with the chemical nature of the functional group. The functional groups that enhance the interchain interactions lead to an enhancement in both the Young's modulus and yield stress. Finally, we applied the developed methodology to study composition-dependence of the mechanical properties for a selected set of binary and ternary copolymers. Overall, our work not only provides insights into rational design rules for tailoring mechanical properties in PHAs, but also opens up avenues for future high throughput atomistic simulation studies geared towards identifying functional PHA polymer candidates for targeted applications.

Machine Learning for Melting Temperature Predictions and Design in Polyhydroxyalkanoate-Based Biopolymers.

Diminishing fossil fuel-based resources and ever-growing environmental concerns related to plastic pollution demand for the development of sustainable and biodegradable polymeric material alternatives. Polyhydroxyalkanoates (PHAs) represent an eco-friendly and economically viable class of polymers with a wide range of applications. However, the chemical diversity combined with tunable physical properties available within PHAs poses discovery and optimization challenges with respect to identifying optimal application-specific chemical compositions. Here we use an example of melting temperature (Tm) prediction to demonstrate the promise of machine learning (ML)-based techniques for establishing efficient structure-property mappings in PHA-based chemical space. We employ a manually curated data set of experimentally measured Tm values for a wide range of PHA homo- and copolymer chemistries along with their reported polymer molecular weights and polydispersity indices. Descriptors based on topology, shape, and charge/polarity of specific motifs forming the polymer backbone were then used to numerically represent the polymers. The ML models developed by using available data were used to rapidly predict the property of multicomponent PHA-based copolymers, while estimating uncertainties underlying the predictions. Combined with a previously developed glass transition temperature (Tg) prediction model and an evolutionary algorithm-based search strategy, the approach is demonstrated to address polymer design with multiobjective optimization challenges.

Characterization of Polyhydroxybutyrate-Based Composites Prepared by Injection Molding.

The waste generated by single-use plastics is often non-recyclable and non-biodegradable, inevitably ending up in our landfills, ecosystems, and food chain. Through the introduction of biodegradable polymers as substitutes for common plastics, we can decrease our impact on the planet. In this study, we evaluate the changes in mechanical and thermal properties of polyhydroxybutyrate-based composites with various additives: Microspheres, carbon fibers or polyethylene glycol (2000, 10,000, and 20,000 MW). The mixtures were injection molded using an in-house mold attached to a commercial extruder. The resulting samples were characterized using microscopy and a series of spectroscopic, thermal, and mechanical techniques. We have shown that the addition of carbon fibers and microspheres had minimal impact on thermal stability, whereas polyethylene glycol showed slight improvements at higher molecular weights. All of the composite samples showed a decrease in hardness and compressibility. The findings described in this study will improve our understanding of polyhydroxybutyrate-based composites prepared by injection molding, enabling advancements in integrating biodegradable plastics into everyday products.

Molecular dynamics simulations for glass transition temperature predictions of polyhydroxyalkanoate biopolymers.

Polyhydroxyalkanoates (PHAs) represent an emerging class of biosynthetic and biodegradable polyesters that exhibit considerable potential to replace petroleum-based plastics towards a sustainable future. Despite the promise, general structure-property mappings within this class of polymers remain largely unexplored. An efficient exploration of this vast chemical space calls for the development and validation of predictive methods for accurate estimation of a diverse range of properties for PHA-based polymers. Towards this aim, here we present and validate the results of our molecular dynamics (MD) simulation based approach aimed at predicting glass transition temperatures (Tg) of PHA-based polymers. Since generally available and widely used polymer forcefields exhibit a relatively poor performance for Tg predictions, we have developed a new forcefield by modifying the polymer consistent force field (PCFF) via refining a selected set of torsion potentials of the polymer backbone using accurate density functional theory (DFT) computations. After carefully assessing the dependence of critical simulation parameters, such as, polymer chain length, number of polymer chains, supercell size, and thermal quenching rate used in the simulation, the applicability and transferability of the modified PCFF (mPCFF) is demonstrated by directly comparing the computed Tg predictions of various polymers with different chemistries, polymer side chain lengths and functional groups forming the polymer side chains against the respective experimentally measured values. Furthermore, the transport properties such as self-diffusion coefficient and viscosity are computationally determined and their well-known correlation with the target properties is demonstrated. Lastly, we have employed the developed approach to predict Tg values for a number of yet-to-be-synthesized PHA-based polymers with a diverse set of functional groups in the polymer side chains. The results are further rationalized by correlating the predicted Tg values with the inter-chain H-bond formation tendencies of the different side chain functional groups. This work represents an important first step towards computationally guided design of PHA-based functional polymers and opens up new directions for a systematic investigation of composition- and configuration-dependent structure-property relationships in more complex binary and ternary copolymer systems.

Machine-Learning-Based Predictive Modeling of Glass Transition Temperatures: A Case of Polyhydroxyalkanoate Homopolymers and Copolymers.

Polyhydroxyalkanoate-based polymers-being ecofriendly, biosynthesizable, and economically viable and possessing a broad range of tunable properties-are currently being actively pursued as promising alternatives for petroleum-based plastics. The vast chemical complexity accessible within this class of polymers gives rise to challenges in the rational discovery of novel polymer chemistries for specific applications. The burgeoning field of polymer informatics addresses this challenge via providing tools and strategies for accelerated property prediction and materials design via surrogate machine-learning models built on reliable past data. In this contribution, we use glass transition temperature Tg as an example target property to demonstrate promise of the data-enabled route to accelerated learning of accurate structure-property mappings in PHA-based polymers. Our analysis uses a data set of experimentally measured Tg values, polymer molecular weights, and a polydispersity index for PHA-based homo- and copolymers that was carefully assembled from the literature. A fingerprinting scheme that captures key properties based on topology, shape, and charge/polarity of specific chemical units or motifs forming the polymer backbone was devised to numerically represent the polymers. A validated statistical learning model is then developed to allow for a mapping of the polymer fingerprints onto the property space in a physically meaningful and reliable manner. Once developed, the model can not only rapidly predict the property of new PHA polymers but also provide uncertainties underlying the predictions. The model is further combined with an evolutionary-algorithm-based search strategy to efficiently identify multicomponent polymer compositions with a prespecified Tg. While the present contribution is focused specifically on Tg, the surrogate model development approach put forward here is general and can, in principle, be extended to a range of other properties.

C-H bond activation by unsymmetrical 2-(N-arylimino)pyrrolide Pt complexes: geometric effects on reactivity.

Reactions of chloroplatinum methyl complexes with N-(arylimino)pyrrolide anions afford cis and trans neutral platinum methyl complexes. Isomers with methyl trans to the pyrrolide nitrogen activate benzene C-H bonds at 85 degrees C more than 80 times faster than the corresponding cis isomer. In addition, reactions of platinum dimethyl complexes with N-(arylimino)pyrroles (Ar = 4-substituted phenyl) in C6D6 at ambient temperature give unlabeled methane and cis methyl complex containing heavily deuterated Pt-Me. In contrast, bulky aryl substituents give methane isotopomers and trans-Pt-Ph product. The origins of these observations are discussed.