ABSTRACT
It has been known that fish oils are prone to contamination by polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs). In this study, the removal of contaminants from fish oil by countercurrent supercritical CO(2) extraction (CC-SCE) and activated carbon treatment was investigated. Fish oil was treated by CC-SCE at 70 degrees C and 30MPa and with a CO(2)/oil ratio of 72; this resulted in a 93% reduction in the sum of PCDDs, PCDFs and DL-PCBs concentration level by and 85% reduction in toxic equivalency (TEQ). CC-SCE uses 40% less CO(2) and yields 30% more refined oil than semi-batch-type processes. Subsequent treatment by activated carbon reduced the concentration level by 94% and TEQ by 93%. CC-SCE is effective for the removal of DL-PCBs, whereas activated carbon treatment is effective for the removal of PCDD/Fs. These results reveal that the combination of CC-SCE and activated carbon treatment is applicable to the removal of PCDD/Fs and DL-PCBs from fish oil.
Subject(s)
Carbon Dioxide/chemistry , Charcoal/chemistry , Chromatography, Supercritical Fluid/methods , Dioxins/isolation & purification , Fish Oils/chemistry , Polychlorinated Biphenyls/isolation & purification , Dioxins/chemistry , Molecular Structure , Polychlorinated Biphenyls/chemistryABSTRACT
Recently, it has been found that fish oils contain a high proportion of contaminants, namely, polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (cPCBs). In this study, the removal of contaminants from fish oil by supercritical CO2 extraction (SCE) and by using adsorbents (0.13 wt % of oil) was investigated. Dioxins and cPCBs were extracted from fish oil by SCE at a temperature of 60 degrees C and a pressure of 28 MPa, and the removal efficiencies for PCDDs and PCDFs were in the range of 15-90% and those for cPCBs were in the range of 70-90%. However, 40% of the oil was extracted simultaneously with contaminants. On the adsorbent treatment, activated carbon showed high efficiency, and the removal efficiencies were >90% for PCDDs and PCDFs, but below 30% for cPCBs. A combination of both of these methods is more effective, and almost 100% of the total toxicity equivalence quantity value could be reduced.
