Effects of surface roughness of ceria-stabilized zirconia/alumina nanocomposite on the morphology and function of human gingival fibroblasts.

We evaluated the biological effects of implant abutments made from ceria-stabilized zirconia/alumina nanocomposite (Ce-TZP/Al2O3) with surface roughness variations using human gingival fibroblasts (HGF-1) in the transmucosal region. Two types of titanium (Ti) and Ce-TZP/Al2O3 disks with different surface roughness profiles were prepared (Ra0.9 and Ra0.02). Surface properties were evaluated using SEM, EDX, and wettability analysis. Biological parameters including cell adhesion, proliferation and morphology, collagen deposition, and inflammatory cytokine expression were evaluated for each disk. Surface morphology analysis of Ce-TZP/Al2O3 and Ti elucidated the uniform linear structures of Ra0.9 and the smooth and flat structures of Ra0.02. Cell morphology showed spindle-shaped and large, circular forms, respectively. Cell adhesion and proliferation and collagen deposition were significantly increased on Ce-TZP/Al2O3 Ra0.02 disk compared with the others, with no significant differences in cytokine expression among all the disks. The reduced surface roughness of Ce-TZP/Al2O3 was advantageous for promoting biological effects in the transmucosal region.

Inhibition of denture plaque deposition on complete dentures by 2-methacryloyloxyethyl phosphorylcholine polymer coating: A clinical study.

STATEMENT OF PROBLEM: Denture plaque-associated infections are regarded as a source of serious dental and medical complications in the elderly population. Methods of managing this problem are needed. PURPOSE: The purpose of this clinical study was to evaluate the effects of treatment with a 2-methacryloyloxyethyl phosphorylcholine polymer, PMBPAz, on plaque deposition in complete dentures. MATERIAL AND METHODS: The study protocol was approved by the Ethics Committee of Showa University (#2013-013). Eleven individuals with maxillary complete dentures participated in this study. Their dentures were treated with PMBPAz, and the amount of denture plaque accumulation was evaluated by staining the denture surfaces with methylene blue after 2 weeks of denture usage. The same procedures were repeated to evaluate the original denture surfaces as a control. The image of the stained denture surface was captured using a digital camera, and the percentage of stained area, quantified as a pixel-based density, of the whole denture area (percentage of plaque index) was calculated for the mucosal and polished surfaces. To quantify the biofilm on the dentures, denture plaque biofilm was detached by ultrasonic vibration, resuspended in diluent, and measured with a microplate reader at an optical density of 620 nm. The effects of PMBPAz treatment on these variables were statistically analyzed with ANOVA (α=.05). RESULTS: The mean ±SD percentage of plaque index was 40.7% ±19.9% on the mucosal surfaces and 28.0% ±16.8% on the polished surfaces of the control denture. The mean percentage of plaque index of PMBPAz-treated dentures significantly decreased to 17.4%% ±12.0% on the mucosal surfaces (P<.001) and 15.0% ±9.9% on the polished surfaces (P<.05). The quantification of plaque deposition agreed with the results of these image analyses. CONCLUSIONS: These results demonstrated the effectiveness of the treatment with the PMBPAz to inhibit the bacterial plaque deposition on complete dentures.

Effect of Nanofeatured Topography on Ceria-Stabilized Zirconia/Alumina Nanocomposite on Osteogenesis and Osseointegration.

PURPOSE: The objective of this study was to evaluate the osteogenic and osseointegration capability of the Ce-tetragonal zirconia polycrystal (TZP)-based nanostructured zirconia/alumina composite (Ce-TZP/Al2O3) that was treated with hydrofluoric acid (HF). MATERIALS AND METHODS: Osteogenic MC3T3-E1 cells were cultured on acid-etched titanium (AETi) disks and Ce-TZP/Al2O3 disks without HF treatment (Zr[0%]), with 4% HF treatment (Zr[4%]), or with 55% HF treatment (Zr[55%]) for 24 hours, and biologic responses were compared among four conditions in vitro. Miniature implants of AETi and Zr(55%) were surgically placed in the femora of rats. Osseointegration was evaluated by a biomechanical push-in test after 2 and 4 weeks of healing. RESULTS: The surface of Zr(55%) rendered nanofeatured topography with a greater surface area and roughness, and extensive geographical undercut as ceria-zirconia crystal disappeared from the superficial layer and was similar to the surface morphology of biomineralized matrices. Culture studies showed that the attachment, proliferation, spread, and functional phenotypes of osteogenic cells, such as alkaline phosphatase activity and bone-related gene expression, were remarkably increased on the Zr(55%) surface. The strength of osseointegration measured using the biomechanical push-in test in a rat model was stronger for Zr(55%) implants than for AETi implants by 1.6 fold. CONCLUSION: The nanostructured Ce-TZP/ Al2O3 surface substantially enhanced the osteogenic response in vitro and the osseointegration capability in vivo, which suggest its potential clinical application as a novel implant material.

Enhanced intracellular signaling pathway in osteoblasts on ultraviolet lighttreated hydrophilic titanium.

Ultraviolet (UV) light treatment of titanium immediately prior to use, or photofunctionalization, reactivates the time-dependent degradation of bioactivity of titanium (biological aging of titanium) and increases its osseointegration capacity beyond the inherent maximal level. Although the initial osteoblast attachment is reportedly enhanced on UV-treated titanium surfaces, the detailed mechanism behind the increase in osseointegration is unknown. This study examined the potential modulation of intracellular signaling pathway in osteoblasts on UV-treated titanium surfaces. Rat bone marrow-derived osteoblasts were cultured on 4-week-old, new, and UV-treated titanium surfaces. The new and UV-treated surfaces were superhydrophilic, whereas the 4-week-old surface was hydrophobic. Although the rate of protein adsorption was similarly increased on the new and UV-treated surfaces compared with the 4-week-old surface, the number of attached cells and their spreading behavior were further enhanced on the UV-treated surface. This additional enhancement was associated with the remarkably upregulated expression of paxillin and phospho-paxillin and exclusive upregulation of Rho GTPase family genes. This study provides with the first molecular evidence of the enhanced initial behavior of osteoblasts on UV-treated titanium surfaces. The enhancement was accentuated and distinct from the new titanium surface with similar hydrophilicity, suggesting that surface properties other than the level of hydrophilicity are responsible.

2-Methacryloyloxyethyl Phosphorylcholine Polymer Treatment of Complete Dentures to Inhibit Denture Plaque Deposition.

Removable dentures made of poly (methyl methacrylate) (PMMA) are prone to bacterial adherence and dental plaque formation, which is called denture plaque. Denture plaque-associated infection is a source of serious dental and medical complications in the elderly. 2-Methacryloyloxyethyl phosphorylcholine (MPC) is a well-known biomedical material that exhibits marked antithrombogenicity and tissue compatibility because of its high resistance to protein adsorption and cell adhesion. Therefore, MPC polymer coatings are suggested to have the potential to inhibit plaque deposition on the surface of PMMA dentures. However, coating MPC polymer on the surface of a PMMA denture is a complex procedure that requires specialized equipment, which is regarded as a major barrier to its clinical application. Here, we introduce a new MPC polymer treatment procedure that uses poly (MPC-co-BMA-co-MPAz) (PMBPAz) to prevent denture plaque deposition on removable dentures. This procedure enables the MPC coating of PMMA denture surfaces in a simple and stable manner that is resistant to various chemical and mechanical stresses due to the MPC layer of PMBPAz that is covalently bound to the PMMA surface by ultraviolet light irradiation. In addition, the procedure does not require any specialized equipment and can be completed by clinicians within 2 min. We applied this procedure in a clinical setting and demonstrated its clinical utility and efficacy in inhibiting plaque deposition on removable dentures.

Evaluation of the durability and antiadhesive action of 2-methacryloyloxyethyl phosphorylcholine grafting on an acrylic resin denture base material.

STATEMENT OF PROBLEM: The polymer 2-methacryloyloxyethyl phosphorylcholine is currently used on medical devices to prevent infection. Denture plaque-associated infection is regarded as a source of serious dental and medical complications in the elderly population, and denture hygiene, therefore, is an issue of considerable importance for denture wearers. Furthermore, because denture bases are exposed to mechanical stresses, for example, denture brushing, the durability of the coating is important for retaining the antiadhesive function of 2-methacryloyloxyethyl phosphorylcholine. PURPOSE: The purpose of this study is to investigate the durability and antiadhesive activity of two 2-methacryloyloxyethyl phosphorylcholine polymer coating techniques: poly-2-methacryloyloxyethyl phosphorylcholine grafting and poly-2-methacryloyloxyethyl phosphorylcholine-co-n-butyl methacrylate coating. It was revealed that 2-methacryloyloxyethyl phosphorylcholine polymer coating of the denture base resin polymethyl methacrylate decreases bacterial biofilm formation. MATERIAL AND METHODS: Durability was examined by rhodamine staining and elemental surface analysis and by determining the wetting properties of the 2-methacryloyloxyethyl phosphorylcholine polymer-modified polymethyl methacrylate after a friction test that comprised 500 brushing cycles. Antiadhesive activity was examined by using a Streptococcus mutans biofilm formation assay. RESULTS: Poly-2-methacryloyloxyethyl phosphorylcholine-grafted polymethyl methacrylate retained 2-methacryloyloxyethyl phosphorylcholine units and antiadhesive activity even after repetitive mechanical stress, whereas co-n-butyl methacrylate-coated polymethyl methacrylate did not. CONCLUSION: These results demonstrated that graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on denture surfaces may contribute to the durability of the coating and prevent microbial retention.

Downregulation of carbonic anhydrase IX promotes Col10a1 expression in chondrocytes.

Carbonic anhydrase (CA) IX is a transmembrane isozyme of CAs that catalyzes reversible hydration of CO(2). While it is known that CA IX is distributed in human embryonic chondrocytes, its role in chondrocyte differentiation has not been reported. In the present study, we found that Car9 mRNA and CA IX were expressed in proliferating but not hypertrophic chondrocytes. Next, we examined the role of CA IX in the expression of marker genes of chondrocyte differentiation in vitro. Introduction of Car9 siRNA to mouse primary chondrocytes obtained from costal cartilage induced the mRNA expressions of Col10a1, the gene for type X collagen α-1 chain, and Epas1, the gene for hypoxia-responsible factor-2α (HIF-2α), both of which are known to be characteristically expressed in hypertrophic chondrocytes. On the other hand, forced expression of CA IX had no effect of the proliferation of chondrocytes or the transcription of Col10a1 and Epas1, while the transcription of Col2a1 and Acan were up-regulated. Although HIF-2α has been reported to be a potent activator of Col10a1 transcription, Epas1 siRNA did not suppress Car9 siRNA-induced increment in Col10a1 expression, indicating that down-regulation of CA IX induces the expression of Col10a1 in chondrocytes in a HIF-2α-independent manner. On the other hand, cellular cAMP content was lowered by Car9 siRNA. Furthermore, the expression of Col10a1 mRNA after Car9 silencing was augmented by an inhibitor of protein kinase A, and suppressed by an inhibitor for phosphodiesterase as well as a brominated analog of cAMP. While these results suggest a possible involvement of cAMP-dependent pathway, at least in part, in induction of Col10a1 expression by down-regulation of Car9, more detailed study is required to clarify the role of CA IX in regulation of Col10a1 expression in chondrocytes.

Gamma ray treatment enhances bioactivity and osseointegration capability of titanium.

The time-dependent degradation of titanium bioactivity (i.e., the biological aging of titanium) has been reported in previous studies. This phenomenon is caused by the loss of hydrophilicity and the inevitable occurrence of progressive contamination of titanium surfaces by hydrocarbons. In this study, we tested the hypothesis that gamma ray treatment, owing to its high energy to decompose and remove organic contaminants, enhances the bioactivity and osteoconductivity of titanium. Titanium disks were acid-etched and stored for 4 weeks. Rat bone marrow-derived osteoblasts (BMOs) were cultured on titanium disks with or without gamma ray treatment (30 kGy) immediately before experiments. The cell density at day 2 increased by 50% on gamma-treated surfaces, which reflected the 25% higher rate of cell proliferation. Osteoblasts on gamma-treated surfaces showed 30% higher alkaline phosphatase activity at day 5 and 60% higher calcium deposition at day 20. The strength of in vivo bone-implant integration increased by 40% at the early healing stage of week 2 for gamma-treated implants. Gamma ray-treated surfaces regained hydrophilicity and showed a lower percentage of carbon (35%) as opposed to 48% on untreated aged surfaces. The data indicated that gamma ray pretreatment of titanium substantially enhances its bioactivity and osteoconductivity, in association with the significant reduction in surface carbon and the recovery of hydrophilicity. The results suggest that gamma ray treatment could be an effective surface enhancement technology to overcome biological aging of titanium and improve the biological properties of titanium implants.

Nanometer-thin TiO2 enhances skeletal muscle cell phenotype and behavior.

BACKGROUND: The independent role of the surface chemistry of titanium in determining its biological properties is yet to be determined. Although titanium implants are often in contact with muscle tissue, the interaction of muscle cells with titanium is largely unknown. This study tested the hypotheses that the surface chemistry of clinically established microroughened titanium surfaces could be controllably varied by coating with a minimally thin layer of TiO(2) (ideally pico-to-nanometer in thickness) without altering the existing topographical and roughness features, and that the change in superficial chemistry of titanium is effective in improving the biological properties of titanium. METHODS AND RESULTS: Acid-etched microroughened titanium surfaces were coated with TiO(2) using slow-rate sputter deposition of molten TiO(2) nanoparticles. A TiO(2) coating of 300 pm to 6.3 nm increased the surface oxygen on the titanium substrates in a controllable manner, but did not alter the existing microscale architecture and roughness of the substrates. Cells derived from rat skeletal muscles showed increased attachment, spread, adhesion strength, proliferation, gene expression, and collagen production at the initial and early stage of culture on 6.3 nm thick TiO(2)-coated microroughened titanium surfaces compared with uncoated titanium surfaces. CONCLUSION: Using an exemplary slow-rate sputter deposition technique of molten TiO(2) nanoparticles, this study demonstrated that titanium substrates, even with microscale roughness, can be sufficiently chemically modified to enhance their biological properties without altering the existing microscale morphology. The controllable and exclusive chemical modification technique presented in this study may open a new avenue for surface modifications of titanium-based biomaterials for better cell and tissue affinity and reaction.

Bone integration capability of alkali- and heat-treated nanobimorphic Ti-15Mo-5Zr-3Al.

The role of nanofeatured titanium surfaces in a number of aspects of in vivo bone-implant integration, and, in particular, their potential advantages over microfeatured titanium surfaces, as well as their specific contribution to osteoconductivity, is largely unknown. This study reports the creation of a unique nanobimorphic titanium surface comprised of nanotrabecular and nanotuft-like structures and determines how the addition of this nanofeature to a microroughened surface affects bone-implant integration. Machined surfaces without microroughness, sandblasted microroughened surfaces, and micro-nano hybrid surfaces created by sandblasting and alkali and heat treatment of Ti-15Mo-5Zr-3Al alloy were subjected to biomechanical, interfacial and histological analyses in a rat model. The presence of microroughness enabled accelerated establishment of biomechanical implant fixation in the early stages of healing compared to the non-microroughened surfaces; however, it did not increase the implant fixation at the late stages of healing. The addition of nanobimorphic features to the microroughened surfaces further increased the implant fixation by as much as 60-100% over the healing time. Bone area within 50 µm of the implant surface, but not beyond this distance, was significantly increased by the presence of nanobimorphic features. Although the percentage of bone-implant contact was also significantly increased by the addition of nanobimorphic features, the greatest improvement was found in the soft tissue intervention between the bone and the implant, which was reduced from >30% to <5%. Mineralized tissue densely deposited with calcium-binding globular proteins was observed in an extensive area of nanobimorphic surfaces after biomechanical testing. This study clearly demonstrates the nanofeature-enhanced osteoconductivity of titanium by an alkali- and heat-treated nanobimorphic surface compared to that by microfeatured surfaces, which results not only in an acceleration but also an improvement of bone-implant integration. The identified biological parameters that successfully detect the advantages of nanofeatures over microfeatures will be useful in evaluating new implant surfaces in future studies.

Effects of pico-to-nanometer-thin TiO2 coating on the biological properties of microroughened titanium.

The independent, genuine role of surface chemistry in the biological properties of titanium is unknown. Although microtopography has been established as a standard surface feature in osseous titanium implants, unfavorable behavior and reactions of osteogenic cells are still observed on the surfaces. To further enhance the biological properties of microfeatured titanium surfaces, this study tested the hypotheses that (1) the surface chemistry of microroughened titanium surfaces can be controllably varied by coating with a very thin layer of TiO(2), without altering the existing topographical and roughness features; and (2) the change in the surface chemistry affects the biological properties of the titanium substrates. Using a slow-rate sputter deposition of molten TiO(2) nanoparticles, acid-etched microroughened titanium surfaces were coated with a TiO(2) layer of 300-pm to 6.3-nm thickness that increased the surface oxygen levels without altering the existing microtopography. The attachment, spreading behavior, and proliferation of osteoblasts, which are considered to be significantly impaired on microroughened surfaces compared with relatively smooth surfaces, were considerably increased on TiO(2)-coated microroughened surfaces. The rate of osteoblastic differentiation was represented by the increased levels of alkaline phosphatase activity and mineral deposition as well as by the upregulated expression of bone-related genes. These biological effects were exponentially correlated with the thickness of TiO(2) and surface oxygen percentage, implying that even a picometer-thin TiO(2) coating is effective in rapidly increasing the biological property of titanium followed by an additional mild increase or plateau induced by a nanometer-thick coating. These data suggest that a super-thin TiO(2) coating of pico-to-nanometer thickness enhances the biological properties of the proven microroughened titanium surfaces by controllably and exclusively modulating their surface chemistry while preserving the existing surface morphology. The improvements in proliferation and differentiation of osteoblasts attained by this chemical modification is of great significance, providing a new insight into how to develop new implant surfaces for better osseointegration, based on the established microtopographic surfaces.

Effects of UV photofunctionalization on the nanotopography enhanced initial bioactivity of titanium.

This study addresses the control of the biological capabilities of titanium through specific nanosurface features and its potential modulation by UV photofunctionalization. Rat bone marrow derived osteoblasts were cultured on titanium disks with micropits alone, micropits with 100 nm nodules, micropits with 300 nm nodules, or micropits with 500 nm nodules, with or without UV treatment. After a 24 h incubation protein adsorption, as well as the attachment, retention, and spread of osteoblasts were examined in correlation with the topographical parameters of the titanium substrates. Each of the biological events was governed by a different set of multiple surface topographical factors with a distinctive pattern of regulation. For instance, without UV treatment the protein adsorption and cell attachment capability of titanium substrates increased linearly with increasing average roughness (Ra) and surface area of titanium disks, but increased polynomially with increasing nanonodule diameter. The cell retention capability increased polynomially with increasing nanonodular diameter and Ra, but increased linearly with increasing surface area. Consequently, the micropits with 300 nm nodules created the most favorable environment for this initial osteoblast behavior and response. UV treatment of the nanonodular titanium surfaces resulted in considerable enhancement of all biological events. However, the pattern of UV-mediated enhancement was disproportionate; exponential and overriding effects were observed depending upon the biological event and topographical parameter. As an example of overriding enhancement, the cell retention capability, which fluctuated with changes in various topographical parameters, became invariably high after UV treatment. The present data provide a basis for understanding how to optimize nanostructures to create titanium surfaces with increased biological capabilities and uncover a novel advantage of UV photofunctionalization of titanium substrates that synergistically increases its nanotopography enhanced biological capabilities whereby most of the initial biological events of osteoblasts were overwhelmingly enhanced beyond a simple proportional increase.

TiO2 micro-nano-hybrid surface to alleviate biological aging of UV-photofunctionalized titanium.

Bioactivity and osteoconductivity of titanium degrade over time after surface processing. This time-dependent degradation is substantial and defined as the biological aging of titanium. UV treatment has shown to reactivate the aged surfaces, a process known as photofunctionalization. This study determined whether there is a difference in the behavior of biological aging for titanium with micro-nano-hybrid topography and titanium with microtopography alone, following functionalization. Titanium disks were acid etched to create micropits on the surface. Micro-nano-hybrid surfaces were created by depositioning 300-nm diameter TiO(2) nodules onto the micropits using a previously established self-assembly protocol. These disks were stored for 8 weeks in the dark to allow sufficient aging, then treated with UV light for 48 hours. Rat bone marrow-derived osteoblasts were cultured on fresh disks (immediately after UV treatment), 3-day-old disks (disks stored for 3 days after UV treatment), and 7-day- old disks. The rates of cell attachment, spread, proliferation, and levels of alkaline phosphatase activity, and calcium deposition were reduced by 30%-50% on micropit surfaces, depending on the age of the titanium. In contrast, 7-day-old hybrid surfaces maintained equivalent levels of bioactivity compared with the fresh surfaces. Both micropit and micro-nano-hybrid surfaces were superhydrophilic immediately after UV treatment. However, after 7 days, the micro-nano- hybrid surfaces became hydrorepellent, while the micropit surfaces remained hydrophilic. The sustained bioactivity levels of the micro-nano-hybrid surfaces were nullified by treating these surfaces with Cl(-)anions. A thin TiO(2) coating on the micropit surface without the formation of nanonodules did not result in the prevention or alleviation of the time-dependent decrease in biological activity. In conclusion, the micro-nano-hybrid titanium surfaces may slow the rate of time-dependent degradation of titanium bioactivity after UV photofunctionalization compared with titanium surfaces with microtopography alone. This antibiological aging effect was largely regulated by its sustained electropositivity uniquely conferred in TiO(2) nanonodules, and was independent of the degree of hydrophilicity. These results demonstrate the potential usefulness of these hybrid surfaces to effectively utilize the benefits of UV photofunctionalization and provide a model to explore the mechanisms underlying antibiological aging properties.

Synergistic effects of UV photofunctionalization and micro-nano hybrid topography on the biological properties of titanium.

Titanium surfaces with micro-nano hybrid topography (nanoscale nodules in microscale pits) have been recently demonstrated to show higher biological capability than those with microtopography alone. On the other hand, UV treatment of titanium surfaces, which is called UV photofunctionalization, has recently been introduced to substantially increase the biological capability and osteoconductivity of titanium surfaces. However, synergistic effects of these two advanced surface modification technologies and regulatory factors to potentially modulate the mutual effects have never been addressed. In this study, utilization of a recently discovered controllable self-assembly of TiO(2) nanonodules has enabled the exploration of the relative contribution of different sizes of nanostructures to determine the biological capability of titanium surfaces and their relative responsiveness to UV photofunctionalization. Rat bone marrow-derived osteoblasts were cultured on titanium disks with either micropits alone, micropits with 100-nm nodules, micropits with 300-nm nodules, or micropits with 500-nm nodules, with or without UV treatment. Although UV treatment increased the attachment, spread, proliferation, and mineralization of these cells on all titanium surfaces, these effects were more accentuated (3-5 times) on nanonodular surfaces than on surfaces with micropits alone and were disproportionate depending on nanonodule sizes. For instance, on UV-treated micro-nano hybrid surfaces, cell attachment correlated with nanonodule sizes in a quadratic approximation with its peak for 300-nm nodules followed by a decline for 500-nm nodules, while cell attachment exponentially correlated with surface roughness with its plateau achieved for 300-nm nodules without a subsequent decline. Moreover, cell attachment increased in a linear correlation with the surface area, while no significant effect of the inter-irregularities space or degree of hydrophilicity was observed on cell attachment. These results suggest that the effect of UV photofunctionalization can be multiplied on micro-nano hybrid titanium surfaces compared with the surfaces with micropits alone. This multiplication is disproportionately regulated by a selected set of topographical parameters of the titanium surfaces. Among the nanonodules tested in this study, 300-nm nodules seemed to create the most effective morphological environment for responding to UV photofunctionalization. The data provide a systematic platform to effectively optimize nanostructures on titanium surfaces in order to enhance their biological capability as well as their susceptibility to UV photofunctionalization.

Alleviation of commercial collagen sponge- and membrane-induced apoptosis and dysfunction in cultured osteoblasts by an amino acid derivative.

PURPOSE: The objectives of this in vitro study were to determine whether the commercial collagen material used in bone augmentation procedures induces oxidative stress-mediated adverse effects on the viability and function of osteoblasts and to determine whether N-acetyl cysteine (NAC), an antioxidant amino acid derivative, can alleviate these effects. MATERIALS AND METHODS: Commercial collagen sponge (Collaplug) and membrane (BioGide) were treated with NAC. Rat calvaria-derived osteoblasts were directly seeded on these materials with or without NAC pretreatment. Cytotoxic evaluation was performed by flowcytometric cell viability assay, confocal laser microscopic analysis of attached cell morphology and reactive oxygen species (ROS) localization, and alkaline phosphatase staining. RESULTS: Cell viability was less than 40% on both collagen sponge and membrane 24 hours after seeding and increased to 50% with NAC pretreatment. Cell death was characterized by apoptosis. Colonization of attached cells was sparse on the untreated sponge and membrane on day 1, and the cells were round, small, and filled with intense and closely packed intracellular ROS. In contrast, NAC-pretreated material had dense cell colonies consisting of well-spread osteoblasts and fully developing cytoskeleton and cellular processes with little ROS generation. On day 7 of culture, NAC-pretreated collagen sponge and membrane yielded an expanded alkaline phosphatase-positive area occupying 60% and 80% of the surface area, respectively, whereas the untreated collagen materials had limited alkaline phosphatase activity (7% or less). CONCLUSIONS: Commercial collagen sponge and membrane induced considerable cell death, impaired initial function, and generated extraordinary intracellular ROS in attached osteoblasts, whereas NAC pretreatment substantially ameliorated these effects. The potential benefits of NAC's detoxifying capacity on bone regeneration using collagen matrix materials in an animal model should be confirmed with further study.

Amino acid derivative-mediated detoxification and functionalization of dual cure dental restorative material for dental pulp cell mineralization.

Current dental restorative materials are only used to fill the defect of hard tissues, such as dentin and enamel, because of their cytotoxicity. Therefore, exposed dental pulp tissues in deep cavities must be first covered by a pulp capping material like calcium hydroxide to form a layer of mineralized tissue. However, this tissue mineralization is based on pathological reaction and triggers long-lasting inflammation, often causing clinical problems. This study tested the ability of N-acetyl cysteine (NAC), amino acid derivative, to reduce cytotoxicity and induce mineralized tissue conductivity in resin-modified glass ionomer (RMGI), a widely used dental restorative material having dual cure mechanism. Rat dental pulp cells were cultured on untreated or NAC-supplemented RMGI. NAC supplementation substantially increased the percentage of viable cells from 46.7 to 73.3% after 24-h incubation. Cell attachment, spreading, proliferative activity, and odontoblast-related gene and protein expressions increased significantly on NAC-supplemented RMGI. The mineralization capability of cells, which was nearly suppressed on untreated RMGI, was induced on NAC-supplemented RMGI. These improved behaviors and functions of dental pulp cells on NAC-supplemented RMGI were associated with a considerable reduction in the production of intracellular reactive oxygen species and with the increased level of intracellular glutathione reserves. These results demonstrated that NAC could detoxify and functionalize RMGIs via two different mechanisms involving in situ material detoxification and antioxidant cell protection. We believe that this study provides a new approach for developing dental restorative materials that enables mineralized tissue regeneration.

Electrostatic control of protein adsorption on UV-photofunctionalized titanium.

Ultraviolet (UV)-photofunctionalization of titanium to enable the establishment of a nearly complete bone-implant contact was reported recently. However, the underlying mechanism for this is unknown. We hypothesized that UV-treated titanium surfaces acquire distinct electrostatic properties that may play important roles in determining the bioactivity of these surfaces. The objective of this study was to determine the protein adsorption capability of UV-treated titanium surfaces under various electrostatic environments. The amount of albumin adsorbed on UV-treated and untreated titanium disks was evaluated under different pH conditions above and below the isoelectric points of albumin and titanium. The effects of additional treatment with various ionic solutions were also examined. Albumin adsorption on UV-treated surfaces at pH 7.0 was considerably greater (6-fold after 3h of incubation and 2.5-fold after 24h) than that to UV-untreated surfaces. UV-enhanced albumin adsorption was abrogated at pH 3.0 or when these titanium surfaces were treated with anions, while maintaining UV-induced superhydrophilicity. Albumin adsorption on UV-untreated titanium surfaces increased after treating these surfaces with divalent cations but not after treating them with monovalent cations. These results indicated that UV-treated titanium surfaces are electropositively charged as opposed to electronegatively charged UV-untreated titanium surfaces. This distinct UV-induced electrostatic property predominantly regulates the protein adsorption capability of titanium, superseding the effect of hydrophilic status, and converts titanium surfaces from bioinert to bioactive. As a result, direct titanium-protein interactions take place exclusively on UV-treated titanium surfaces without the aid of bridging ions.

The enhanced characteristics of osteoblast adhesion to photofunctionalized nanoscale TiO2 layers on biomaterials surfaces.

Recently, UV photofunctionalization of titanium has been shown to be effective in enhancing osteogenic environment around this functional surface, in particular for the use of endosseous implants. However, the underlying mechanism remains unknown and its potential application to other tissue engineering materials has never been explored. We determined whether adhesion of a single osteoblast is enhanced on UV-treated nano-thin TiO(2) layer with virtually no surface roughness or topographical features. Rat bone marrow-derived osteoblasts were cultured on UV-treated or untreated 200-nm thick TiO(2) sputter-coated glass plates. After an incubation of 3 h, the mean critical shear force required to initiate detachment of a single osteoblast was determined to be 1280 +/- 430 nN on UV-treated TiO(2) surfaces, which was 2.5-fold greater than the force required on untreated TiO(2) surfaces. The total energy required to complete the detachment was 37.0 +/- 23.2 pJ on UV-treated surfaces, 3.5-fold greater than that required on untreated surfaces. Such substantial increases in single cell adhesion were also observed for osteoblasts cultured for 24 h. Osteoblasts on UV-treated TiO(2) surfaces were larger and characterized with increased levels of vinculin expression and focal contact formation. However, the density of vinculin or focal contact was not influenced by UV treatment. In contrast, both total expression and density of actin fibers increased on UV-treated surfaces. Thin layer TiO(2) coating and UV treatment of Co-Cr alloy and PTFE membrane synergistically resulted in a significant increase in the ability of cell attachment and osteoblastic production of alkaline phosphatase. These results indicated that the adhesive nature of a single osteoblast is substantially enhanced on UV-treated TiO(2) surfaces, providing the first evidence showing that each individual cell attached to these surfaces is substantially more resistant to exogenous load potentially from blood and fluid flow and mechanical force in the initial stage of in vivo biological environment. This enhanced osteoblast adhesion was supported synergistically but disproportionately by enhancement in focal adhesion and cytoskeletal developments. Also, this study demonstrated that UV treatment is effective on nano-thin TiO(2) depositioned onto non-Ti materials to enhance their bioactivity, providing a basis for TiO(2)-mediated photofunctionalization of biomaterials, a new method of developing functional biomaterials.

Enhancement of osteoblast adhesion to UV-photofunctionalized titanium via an electrostatic mechanism.

The mechanism underlying the recently found photofunctionalization of titanium is unknown. We focused on how the initial interaction between the cells and photofunctionalized titanium is enhanced at a molecular-level and the role played by the electrostatic status of the titanium surfaces in the possible regulatory mechanism for determining their bioactivity. Rat bone marrow-derived osteoblasts were cultured on untreated and ultraviolet (UV)-treated titanium surfaces. UV treatment converted the titanium surfaces from hydrophobic to superhydrophilic. The number of osteoblasts attached to UV-treated titanium surfaces was substantially greater than that attached to untreated surfaces (5-fold and 2-fold after 3 and 24 h of incubation, respectively). Osteoblasts cultured for 3 and 24 h on these titanium surfaces were detached mechanically by vibrational force and enzymatically by trypsin treatment. Cell adhesion evaluated by the percentage of remaining cells after these detachments was substantially greater for cells on UV-treated titanium surfaces compared to untreated titanium surfaces (110-120% greater for cells incubated for 3 h and 50-60% greater for cells incubated for 24 h). Osteoblasts on UV-treated surfaces expressed more vinculin. UV-enhancing effect in cell adhesion was also demonstrated under a serum-free condition. UV-enhanced cell adhesion was abrogated when the UV-treated titanium surfaces were electrostatically neutralized by either removing the electric charge or masking with monovalent anions, while the surfaces maintained superhydrophilicity. In conclusion, the establishment of osteoblast adhesion is accelerated and augmented remarkably on UV-treated titanium surfaces, associated with upregulated expression of vinculin. This study has identified an electrostatic property of UV-treated titanium surfaces playing a regulatory role in determining their bioactivity, superseding the effect of the hydrophilic nature of these surfaces. A mechanism underlying the UV-induced conversion of titanium from bioinert to bioactive, in which direct cell-titanium interaction is exclusively enabled, is proposed.

Selective cell affinity of biomimetic micro-nano-hybrid structured TiO2 overcomes the biological dilemma of osteoblasts.

OBJECTIVE: There is a great demand for dental implant surfaces to accelerate the process of peri-implant bone generation to reduce its healing time and enable early loading. To this end, an inverse correlation between the proliferation and functional maturation (differentiation) in osteoblasts presents a challenge for the rapid generation of greater amounts of bone. For instance, osteoblasts exhibit faster differentiation but slower proliferation on micro-roughened titanium surfaces. Using a unique micro-nano-hierarchical topography of TiO(2) that mimics biomineralized matrices, this study demonstrates that this challenge can be overcome without the use of biological agents. METHODS: Titanium disks of grade 2 commercially pure titanium were prepared by machining (smooth surface). To create a microtexture with peaks and valleys (micropit surface), titanium disks were acid-etched. To create 200-nm TiO(2) nanonodules within the micropits (nanonodule-in-micropit surface), TiO(2) was sputter-deposited onto the acid-etched surface. Rat bone marrow-derived osteoblasts and NIH3T3 fibroblasts were cultured on machined smooth, micropit, and nanonodule-in-micropit surfaces. RESULTS: Despite the substantially increased surface roughness, the addition of 200-nm nanonodules to micropits increased osteoblast proliferation while enhancing their functional differentiation. In contrast, this nanonodule-in-micropit surface decreased proliferation and function in fibroblasts. SIGNIFICANCE: The data suggest the establishment of cell-selectively functionalized nano-in-micro smart titanium surfaces that involve a regulatory effect on osteoblast proliferation, abrogating the inhibitory mechanism on the micropitted surface, while enhancing their functional differentiation. Biomimetic and controllable nature of this nanonodules-in-micropits surface may offer a novel micro-to-nanoscale hierarchical platform to biologically optimize nanofeatures of biomaterials. Particularly, this micro-nano-hybrid surface may be an effective approach to improve current dental implant surfaces for accelerated bone integration.