Preparation of an eco-friendly antibacterial agent for food packaging containing Houttuynia cordata Thunb. extract.

This study aims to develop an antibacterial agent that can be used for food packaging. Essential oils of Houttuynia cordata Thunb., a well-known medical herb, were extracted by two methods: multi-solvent consecutive extraction method and single ethanol extraction with a pre-heating method. Consequently, the extract obtained by the single ethanol extraction with a pre-heating method was more satisfactory from the operational and economic aspects. Afterwards, one of the encapsulation techniques: co-precipitation method using ß-cyclodextrins as wall materials, was applied to form capsules for the protection of the obtained extract. After the capsule synthesis, the results of scanning electron micrographs and X-ray diffraction showed ß-cyclodextrin crystallites in the form of thinner plates became oriented upon co-precipitation. Combining the results of Fourier transform-infrared spectra and an antibacterial assay using Bacillus subtilis as an object microorganism, the extract was confirmed to be successfully encapsulated within hollow cavities of ß-cyclodextrins. A significant inhibitory activity on the growth and breeding of Bacillus subtilis was observed after the addition of fabricated capsules, which suggests the capsules containing the Houttuynia cordata Thunb. extract can be used as eco-friendly antibacterial agents for food packaging.

Mutagenicity of Tectona grandis Wood Extracts and Their Ability to Improve Carbohydrate Yield for Kraft Cooking Eucalyptus Wood.

Considering the toxicity of the impurities of synthesized anthraquinone, this study clarified new catalytic compounds for kraft cooking with improved carbohydrate yield and delignification and less mutagenicity, which are important for ensuring the safety of paper products in contact with food. The 2-methylanthraquinone contents of teak (Tectona grandis) woods were 0.18-0.21%. Acetone extracts containing 2-methylanthraquinone from Myanmar and Indonesia teak woods as additives improved lignin removal during kraft cooking of eucalyptus wood, which resulted in kappa numbers that were 2.2-6.0 points lower than the absence of additive. Myanmar extracts and 2-methylanthraquinone improved carbohydrate yield in pulps with 1.7-2.2% yield gains. Indonesia extracts contained more deoxylapachol and its isomer than 2-methylanthraquinone. The residual content of 2-methylanthraquinone in the kraft pulp was trace. Although Ames tests showed that the Indonesia and Myanmar extracts were mutagenic to Salmonella typhimurium, 2-methylanthraquinone was not. The kraft pulp obtained with the additives should be safe for food-packaging applications, and the addition of 0.03% 2-methylanthraquinone to kraft cooking saves forest resources and fossil energy in industries requiring increased pulp yield.

Evidence that human oral glucose detection involves a sweet taste pathway and a glucose transporter pathway.

The taste stimulus glucose comprises approximately half of the commercial sugar sweeteners used today, whether in the form of the di-saccharide sucrose (glucose-fructose) or half of high-fructose corn syrup (HFCS). Therefore, oral glucose has been presumed to contribute to the sweet taste of foods when combined with fructose. In light of recent rodent data on the role of oral metabolic glucose signaling, we examined psychopharmacologically whether oral glucose detection may also involve an additional pathway in humans to the traditional sweet taste transduction via the class 1 taste receptors T1R2/T1R3. In a series of experiments, we first compared oral glucose detection thresholds to sucralose thresholds without and with addition of the T1R receptor inhibitor Na-lactisole. Next, we compared oral detection thresholds of glucose to sucralose and to the non-metabolizable glucose analog, α-methyl-D-glucopyranoside (MDG) without and with the addition of the glucose co-transport component sodium (NaCl). Finally, we compared oral detection thresholds for glucose, MDG, fructose, and sucralose without and with the sodium-glucose co-transporter (SGLT) inhibitor phlorizin. In each experiment, psychopharmacological data were consistent with glucose engaging an additional signaling pathway to the sweet taste receptor T1R2/T1R3 pathway. Na-lactisole addition impaired detection of the non-caloric sweetener sucralose much more than it did glucose, consistent with glucose using an additional signaling pathway. The addition of NaCl had a beneficial impact on the detection of glucose and its analog MDG and impaired sucralose detection, consistent with glucose utilizing a sodium-glucose co-transporter. The addition of the SGLT inhibitor phlorizin impaired detection of glucose and MDG more than it did sucralose, and had no effect on fructose, further evidence consistent with glucose utilizing a sodium-glucose co-transporter. Together, these results support the idea that oral detection of glucose engages two signaling pathways: one that is comprised of the T1R2/T1R3 sweet taste receptor and the other that utilizes an SGLT glucose transporter.

MIG12 is involved in the LXR activation-mediated induction of the polymerization of mammalian acetyl-CoA carboxylase.

Liver X receptors (LXR) α and ß are a family of nuclear receptors that regulate lipogenesis by controlling the expression of the genes involved in the synthesis of fatty acids. MID1IP1, which encodes MIG12, is a target gene of LXR. MIG12 induces fatty acid synthesis by stimulating the polymerization-mediated activation of acetyl-CoA carboxylase (ACC). Here, we show that LXR's activation stimulates ACC polymerization in HepG2 cells by increasing the expression of MIG12. A knockdown of MID1IP1 abrogated the stimulation completely. The mutations of MIG12's leucine-zipper domain reduced the interaction between MIG12 and ACC, thus decreasing the MIG12's capacity to stimulate ACC polymerization. These results indicate that LXR's activation stimulates lipogenesis not only through the induction of the genes encoding lipogenic enzymes but also through MIG12's stimulation of ACC polymerization.

Change in lignin structure, but not in lignin content, in transgenic poplar overexpressing the rice master regulator of secondary cell wall biosynthesis.

We previously succeeded in enhancing wood formation of wood in transgenic poplar plants by overexpressing secondary wall NAM/ATAF/CUC (NAC) domain protein 1 from Oryza sativa (OsSWN1), a transcription factor 'master regulator' of secondary cell wall formation in rice, under control of the fiber preferential NST3/SND1 promoter from Arabidopsis. Transgenic plants had an increased cell wall thickness and cell wall density of individual cells in the secondary xylem of stems as well as an increased wood density. OsSWN1 triggers the induction of polysaccharide and lignin biosynthetic gene expressions, however, resulting in no significant impact on the lignin content in the transgenic plants. In contrast, wet and dry chemical analyses of lignin revealed changes in S/G ratio and in the composition of lignin interunit linkages in transgenic lines. The results from gene expression analysis suggest that the structural changes in lignin were due to an unbalanced induction of lignin biosynthetic genes in transgenic lines. Our present data indicate that the overexpression of the chimeric transcription factor causes accelerated deposition of secondary cell wall components including lignin and polysaccharides through an acquired mechanism.

Feeding Deterrence to Reticulitermes speratus (Kolbe) by Fibroporia radiculosa (Peck) Parmasto 1968.

Brown rot fungus Fibroporia radiculosa (Peck) Parmasto grown in decayed wood and non-wood material, potato dextrose agar (PDA) media, deterred Reticulitermes speratus (Kolbe) feeding. Decayed wood and PDA media were extracted and tests were performed to assess termite feeding behavior towards the extracts. We found that the extract from PDA media also suppressed termite feeding, although it did not induce mortality. Using gas chromatography and mass spectrometry analysis, two bioactive compounds were detected from the decayed wood extract, and one was detected from the PDA extract. Based on National Institute of Science and Technology (USA) Mass Spectral library match and compound fragmentation, both of the compounds belong to the sesquiterpenes family.

Toxicity and Feeding Deterrent Effect of 2-Methylanthraquinone from the Wood Extractives of Tectona grandis on the Subterranean Termites Coptotermes formosanus and Reticulitermes speratus.

No-choice feeding tests using ethanol, chloroform, and acetone extractives of teak (Tectona grandis) heartwood clearly showed feeding deterrent activity and toxicity to the subterranean termite Reticulitermes speratus. The amount of 2-methylanthraquinone (MAQ) in teak wood extractives was not related to the feeding deterrents or toxicity, as shown by the no-choice feeding tests conducted using crude extractives containing various amounts of MAQ, MAQ alone, and fractions of crude extractives. As a native pest, the subterranean termite Coptotermes formosanus was more tolerant to the fractions of crude extractives than Reticulitermes speratus, and the mortality observed in C. formosanus was not due to the presence of MAQ.

Evidence of Subterranean Termite Feeding Deterrent Produced by Brown Rot Fungus Fibroporia radiculosa (Peck) Parmasto 1968 (Polyporales, Fomitopsidaceae).

We found that decayed wood stakes with no termite damage collected from a termite-infested field exhibited a deterrent effect against the termite Reticulitermes speratus, Kolbe, 1885. The effect was observed to be lost or reduced by drying. After identification, it was found that the decayed stakes were infected by brown rot fungus Fibroporia radiculosa (Peck) Parmasto, 1968. In a no-choice feeding test, wood blocks decayed by this fungus under laboratory condition deterred R. speratus feeding and n-hexane extract from the decayed stake and blocks induced termite mortality. These data provided an insight into the interaction between wood-rot fungi and wood-feeding termites.

Quality evaluation of dissolving pulp fabricated from banana plant stem and its potential for biorefinery.

The study was conducted to evaluate the quality of dissolving pulp of Musa sapientum L. (banana) plant stem and its potential for biorefinery. Introduction of pre-hydrolysis prior to any alkaline pulping process helps to reduce the content of hemicellulose and consequently produce acceptably high content of cellulose pulp. Water pre-hydrolysis was done at 150°C for 90min. The amount of lignin, xylan and glucan in the extracted pre-hydrolysis liquor (PHL) was 1.6, 4.9 and 1.6%, respectively. Pulping of pre-extracted chips was done following soda-AQ, alkaline sulfite and kraft process. The ratio of chip to liquor was 1:7 for both pre-hydrolysis and pulping. The kraft pulping process with 20% active alkali and 25% sulfidity at 150°C for 90min showed the best result. The lowest kappa number was 26.2 with a considerable pulp yield of 32.7%. The pulp was bleached by acidic NaClO2 and the consistency was 10% based on air-dried pulp. The lowest amount of 7% NaClO2 was used for the bleaching sequence of D0ED1ED2. After D0ED1ED2 bleaching, the pulp showed that α-cellulose, brightness and ash were 91.9, 77.9 and 1.6% respectively. The viscosity was 19.9cP. Hence, there is a possibility to use banana plant stem as a raw material for dissolving grade pulp and other bioproducts.

Influences of saltwater immersion on properties of wood-cellulosic paper.

The saltwater immersion method was developed to inhibit mould growth on flood- or tsunami-damaged paper. Commercially available fine paper used for printing and writing showed decreased tensile indices after saltwater immersion. The salt remaining in the paper tended to increase the moisture content because of the salt deliquescence and moisture in the air. The tensile index was restored by removing salt from the paper. Crystallization and distribution of salt in interfibre pores were also considered to influence interfibre rebonding. The difference in the fibre responses to saltwater depended on the relationship between nano-scaled pores in the fibre walls, osmotic pressure, and the degree of sizing, which resulted in low water retention values. More of the starch applied as a surface sizing agent was dissolved or dispersed during distilled water immersion than saltwater immersion. This loosened the fibre network, which was a factor that decreased the sizing degree of the paper.

Composition of intake sugars and emission of gases from paper sludges by Coptotermes formosanus Shiraki.

Paper sludge is a by-product of the pulping process and is landfilled or incinerated for disposal. In this study, we evaluated ingestion and digestibility of carbohydrates, by the termite Coptotermes formosanus, in two kinds of sludges: sludge C from the chemical pulp mill and sludge M from the mechanical pulp mill. The no-choice tests using the termite for three weeks showed that the mass loss of sludge C was significantly higher than that of the control samples: a bleached pulp and red pine wood. It is considered that the higher inorganic content of sludge C resulted in the higher mass loss when the same amount of carbohydrates was taken by the pulp- or wood-fed termite. Although the inorganic content of sludge M was almost the same as that of sludge C, the higher lignin content in sludge M is thought to have resulted in the lower mass loss. Analysis of sugar composition in the faecal materials of the termite showed that about 73% of glucose and 81% of xylose in sludge C were digested. It was concluded that the digestibility of these sugars in sludge C was the same as that of the control samples despite containing high amounts of inorganic compounds. However, the hydrogen conversion rate by the termites that were fed sludge was lower than that of the termites that were fed pulp in the no-choice test for three days: one mole of glucose from the sludge and pulp was converted to 0.51 and 0.80 moles of hydrogen, respectively.

DNA packaging proteins Glom and Glom2 coordinately organize the mitochondrial nucleoid of Physarum polycephalum.

Mitochondrial DNA (mtDNA) is generally packaged into the mitochondrial nucleoid (mt-nucleoid) by a high-mobility group (HMG) protein. Glom is an mtDNA-packaging HMG protein in Physarum polycephalum. Here we identified a new mtDNA-packaging protein, Glom2, which had a region homologous with yeast Mgm101. Glom2 could bind to an entire mtDNA and worked synergistically with Glom for condensation of mtDNA in vitro. Down-regulation of Glom2 enhanced the alteration of mt-nucleoid morphology and the loss of mtDNA induced by down-regulation of Glom, and impaired mRNA accumulation of some mtDNA-encoded genes. These data suggest that Glom2 may organize the mt-nucleoid coordinately with Glom.

Lignin degradation in wood-feeding insects.

The aromatic polymer lignin protects plants from most forms of microbial attack. Despite the fact that a significant fraction of all lignocellulose degraded passes through arthropod guts, the fate of lignin in these systems is not known. Using tetramethylammonium hydroxide thermochemolysis, we show lignin degradation by two insect species, the Asian longhorned beetle (Anoplophora glabripennis) and the Pacific dampwood termite (Zootermopsis angusticollis). In both the beetle and termite, significant levels of propyl side-chain oxidation (depolymerization) and demethylation of ring methoxyl groups is detected; for the termite, ring hydroxylation is also observed. In addition, culture-independent fungal gut community analysis of A. glabripennis identified a single species of fungus in the Fusarium solani/Nectria haematococca species complex. This is a soft-rot fungus that may be contributing to wood degradation. These results transform our understanding of lignin degradation by wood-feeding insects.

High-molecular-weight polyphenols from oolong tea and black tea: purification, some properties, and role in increasing mitochondrial membrane potential.

High-molecular-weight polyphenols from oolong and black teas increased mitochondrial membrane potential, as measured by a method using ciliated protozoan Tetrahymena and rhodamine 123. These polyphenols, referred to as mitochondrial activation factors (MAFs), were purified from oolong and black teas by solvent extraction and Toyopearl column chromatography. The number-average molecular weights of the MAFs were 9,000 to 18,000, and the weight-average molecular weights were 15,000 to 25,000. The MAFs increased the mitochondrial membrane potential more than catechins did. Treatment of the MAFs with tannase indicated that they contained galloyl residues. When the MAFs were hydrolyzed with HCl-n-BuOH, cyanidin and delphinidin were detected. The partial structure of the MAFs was analyzed by pyrolysis-gas chromatography-mass spectrometry, and nine compounds were identified. These results suggest that MAFs are heterogeneous polymers of flavan-3-ols and flavan-3-ol gallates with intermonomeric linkages of B-ring to B-ring and C-ring to A-ring.

Regulation of levels of actin threonine phosphorylation during life cycle of Physarum polycephalum.

Under various environmental stresses, the true slime mold Physarum polycephalum converts into dormant forms, such as microcysts, sclerotia, and spores, which can survive in adverse environments for a considerable period of time. In drought-induced sclerotia, actin is threonine phosphorylated, which blocks its ability to polymerize into filaments. It is known that fragmin and actin-fragmin kinase (AFK) mediate this phosphorylation event. In this work, we demonstrate that high levels of actin threonine phosphorylation are also found in other dormant cells, including microcysts and spores. As the threonine phosphorylation of actin in microcysts and sclerotia were induced by drought stress but not by other stresses, we suggest that drought stress is essential for actin phosphorylation in both cell types. Although characteristic filamentous actin structures (dot- or rod-like structures) were observed in microcysts, sclerotia, and spores, actin phosphorylation was not required for the formation of these structures. Prior to the formation of both microcysts and sclerotia, AFK mRNA expression was activated transiently, whereas fragmin mRNA levels decreased. Our results suggest that drought stress and AFK might be involved in the threonine phosphorylation of actin.

Tetramethylammonium hydroxide (TMAH) thermochemolysis of lignin: behavior of 4-O-etherified cinnamyl alcohols and aldehydes.

The thermochemolytic behavior of 4-O-etherified cinnamyl alcohols and aldehydes in lignin was investigated in the presence of tetramethylammonium hydroxide (TMAH) (315 degrees C/4 s), using veratrylglycol-beta-(coniferyl alcohol) ether (1a), veratrylglycol-beta-(sinapyl alcohol) ether (1b), and veratrylglycol-beta-(coniferyl aldehyde) ether (2). The methylated products were monitored with gas chromatography-mass spectrometry. Dimers 1a and 1b provided the coniferyl and sinapyl alcohol dimethyl ethers consisting of three isomers, respectively. Coniferyl alcohol dimethyl ether isomers were also observed in the TMAH thermochemolysis pyrolysates of a bulk dehydrogenation polymer of coniferyl alcohol and a Japanese cedar (Cryptomeria japonica) wood. Coniferyl aldehyde methyl ether was not provided from TMAH thermochemolyses of coniferyl aldehyde, 2, a dehydrogenation polymer of coniferyl aldehyde, and the cedar wood. The former three provided veratryl aldehyde in a large abundance, instead of coniferyl aldehyde methyl ether. Sinapyl aldehyde provided 3,4,5-trimethoxybenzaldehyde in a large abundance and sinapyl aldehyde methyl ether in a trace abundance. The results showed that TMAH thermochemolysis is an effective tool to obtain information on cinnamyl alcohol end groups, but is not applicable to analysis of cinnamyl aldehyde end groups.

Pyrolysis of lignin in the presence of tetramethylammonium hydroxide (TMAH): products stemming from beta-5 substructures.

Lignin model compounds, synthetic lignins, and cedar wood have been analyzed by pyrolysis-gas chromatography(-mass spectrometry) in the presence of tetramethylammonium hydroxide (TMAH) to examine the behavior of beta-5 substructures specifically under these conditions. Two model compounds contained a beta-5 linkage and a gamma-CH2OH group. The phenolic model compound produced stilbene products by way of a formaldehyde elimination of the gamma-CH2OH. The nonphenolic model compound underwent dehydration to give arylbenzofuran products. Dehydrogenation polymers of coniferyl alcohol gave a large amount of stilbene products in TMAH/pyrolysis. TMAH/pyrolysis of a Japanese cedar (Cryptomeria japonica) wood yielded a very small amount of stilbene products. The results demonstrated that synthetic lignins are rich in terminal beta-5 substructures, but cedar (a softwood) contains a paucity of the terminal beta-5 substructures.

Pyrolysis of lignin in the presence of tetramethylammonium hydroxide: a convenient method for S/G ratio determination.

Pyrolysis-gas chromatography in the presence of tetramethylammonium hydroxide (TMAH) was applied to the determination of the ratio of the abundances of the syringyl beta-aryl ether subunits to those of the guaiacyl equivalents (S/G) in lignin. Diazomethane-methylated kenafs (Hibiscus cannabinus and Hibiscus sabdariffa) and beech (Fagus crenata) in situ lignins were employed. Relative abundances of pyrolysis products derived from the guaiacyl and syringyl beta-aryl ether subunits were determined. The S/G ratios for in situ lignins were obtained with average 3.1% relative standard deviation for a minimum of six repeated runs. The S/G ratios determined by pyrolysis in the presence of TMAH agreed well with those determined by thioacidolysis, with a significant linear regression (R(2) = 0.9867). The results showed that pyrolysis with TMAH is an effective tool for obtaining information on the S/G ratio for in situ lignins.