Effects of maxillofacial prosthetic treatment on oral health-related quality of life and masticatory ability of patients with head and neck tumors.

PURPOSE: Using multivariate analysis, this study investigated the effectiveness of maxillofacial prosthetic treatment in relation to oral health-related quality of life (OHR-QoL), masticatory ability (food intake status score and gum-jelly test score) and related factors in patients who had undergone surgery for head and neck tumors. METHODS: The study cohort comprised 112 patients who underwent surgical resection and prosthetic treatment among 224 patients with head and neck tumors seen at the Maxillofacial Prosthetics Clinic of Tohoku University Hospital in a 2-year period. Correlations between OHR-QoL, food intake status score, and gum-jelly test score (criterion variables), and age, sex, maxillary defect, tongue/soft tissue defect, reconstructive surgery, and chemoradiotherapy (explanatory variables) were investigated, and the data were examined statistically. RESULTS: Maxillary defect, tongue and soft palate tissue defect, and chemoradiotherapy were identified as factors that hindered the effectiveness of maxillofacial prosthetic treatment for improvement of the OHR-QoL, food intake status score, and gum-jelly test score. On the other hand, reconstructive surgery was a factor that facilitated the improvement of OHR-QoL and masticatory ability with maxillofacial prosthetic treatment. CONCLUSION: The factors identified to be related to the success or failure of maxillofacial prosthetic treatment suggest the importance of combining prosthetic intervention with surgical reconstruction.

A novel treatment based on powder jet deposition technique for dentin hypersensitivity: a randomized controlled trial.

BACKGROUND: This study aimed to evaluate the efficacy and safety of dentin hypersensitivity (DH) treatment using a newly developed device based on a powder jet deposition (PJD) technique that creates a hydroxyapatite (HAP) layer on the dentin surface, thereby alleviating the hypersensitivity. The effect of the PJD treatment was compared with that of conventional treatment using Teethmate Desensitizer (TMD; calcium-phosphate containing material with TTCP (Ca4(PO4)2O) and DCPA (CaHPO4)), which has been used clinically in Japan with well-confirmed effectiveness. MATERIALS AND METHODS: A randomized controlled trial was conducted including 35 patients who had symptoms of DH in two or more quadrants. Two test teeth were selected per patient (70 teeth in total) and randomly assigned to PJD or TMD treatment. The efficacy was evaluated using the improvement rate for air and scratch pain according to the scores obtained via visual analog scale 12 weeks after treatment. The safety assessment was performed focusing on gingival index (GI) and spontaneous pain. The t-test was used to analyze the non-inferiority of PJD treatment compared to TMD treatment. RESULTS: The improvement rate of air pain was 69.0% for PJD and 69.7% for TMD. The improvement rate of scratch pain was 80.8% for PJD and 81.7% for TMD. Non-inferiority with a margin of 10% was not observed for both air and scratch pain. No change was observed in GI from baseline and the improvement rate of spontaneous pain for PJD was higher than that for TMD. CONCLUSION: Non-inferiority of PJD to TMD treatment was not observed in this study; however, it was not statistically demonstrated, and the results were thus interpreted as inconclusive. PJD did improve the DH symptoms, as did TMD. PJD's therapeutic effect was most likely attributable to the deposition of a HAP layer on the tooth surface, which would alleviate hypersensitivity for at least 12 weeks without causing severe adverse events. TRIAL REGISTRATION: UMIN-CTR. ID: UMIN000025022. date: 02/12/2016.

Condylar Resorption Following Compressive Mechanical Stress in Rabbit Model - Association of Matrix Metalloproteinases.

BACKGROUND/AIM: Idiopathic condylar resorption (ICR) is a morphological change of the condylar head that occurs following orthodontic treatment or orthognathic surgery. This complication is serious, as it can cause relapse after mandible treatment. The aim of this experimental study was to evaluate the mechanism of influence of condylar resorption on compressive mechanical stress in temporomandibular joint following a change in occlusal position by mandible advancement. MATERIALS AND METHODS: An osteotomy procedure at the midline of mandible was performed in 15 rabbits, with the left side moved forward by 3.5 mm. Advancement of the left side of the mandible resulted in compressive mechanical stress on condylar head on the left side. Samples were subjected to micro-computed tomography, histological staining and immunohistochemistry. RESULTS: The area and depth of anterior condylar resorption at two weeks were significantly different as compared to those at one week (p<0.05). TRAP staining confirmed the significantly largest number of TRAP-positive cells after two weeks (p=0.02), compared to one week. MMP-3 and MMP-13 immunostaining of the anterior condylar head at two weeks revealed high levels of both proteins from the surface to the deep layer of cartilage. CONCLUSION: Compressive mechanical stress following mandible advancement results in load on the anterior surface of the condylar head, which leads to bone resorption there, and induces MMP-3 and MMP-13 related to degradation of condylar head cartilage.

Comparison of the accuracy of resin-composite crowns fabricated by three-dimensional printing and milling methods.

This study aimed to compare the dimensional accuracies of three-dimensional (3D)-printed and milled resin-composite crowns, and to determine acceptable abutment-tooth shapes for printing. Four first-molar abutment models were prepared: the master model form and three models with sharp occluso-axial line angles. Crowns were designed on each abutment using computer-aided design software. The drill-offset value was set at 0.0 or 0.5 mm to evaluate the effect on the dimensional accuracy of milling. A digital light processing-based 3D printer was used to fabricate 3D-printed crowns. Milled crowns were fabricated by wet-milling. The trueness was evaluated by superimposing the design data. Regardless of the abutment form, 3D-printed crowns showed higher accuracy with fewer marginal discrepancies than milled crowns. Milled crowns showed significant dimensional deviations, especially at cusps. Moreover, offset correction resulted in grooves on the internal surface of milled crowns with negative deviations, which were especially evident in crowns for the sharp models.

Clinical Trial for Evaluating the Effectiveness and Safety of a New Dental Plaque Removal Device: Microscale Mist Unit.

This study evaluates the effectiveness and safety of a microscale mist unit (MSM-UNIT) that sprays high-speed fine water droplets to remove dental plaque adhering to the oral mucosa (tongue and palate) and tooth surface. Fifteen patients who had difficulty self-managing sufficient oral care were included in this study. Effectiveness was evaluated for at least five patients' tongues, palate mucosas, and tooth surfaces, and safety evaluation was conducted at all three sites for all patients. Effectiveness was evaluated using the rate of degree of dental plaque removal. Safety was evaluated using a numerical rating scale (NRS) for pain and symptoms of inflammation. An operator who performed treatment and an evaluator who evaluated effectiveness and safety were designated. In addition, an image judgment committee judged effectiveness. Although evaluation of the tongue varied between the evaluators and the image judgment committee, the rates of degree for all plaque removal increased in all regions. In addition, low pain NRS results and minimal symptoms of inflammation were observed and within an acceptable range. The MSM-UNIT can be used effectively and safely for removing oral plaque not only from teeth, but also from the oral mucosa.

Medical-Dental Collaboration and Interprofessional Training for Maxillofacial Diseases at Tohoku University Hospital.

The Tohoku University Hospital has been a clinical and research facility for all the related departments of Tohoku University. Medical-dental and interprofessional collaboration has resulted in special treatment teams, made up of members of departments such as the center for head and neck cancer, the center for dysphagia, and the cleft lip and palate center. Those treatment teams held conferences, case study meetings, reading sessions, and in-hospital seminars. The purpose of this study was to evaluate the outcomes of various medical-dental and the interprofessional collaboration at Tohoku University Hospital and training program to equip hospital dentists in higher medical institutions. The attainment targets are the acquisition of basic medical skills and knowledge under the guidance of supervising doctors. As a result, the hospital dentists could acquire their own specialized knowledge and skills certificated by each academic society. The smooth team treatment has been achieved, and the number of cases discussed by cancer boards and center for dysphagia has increased year by year due to the efficiency of their clinical pathways. On the dental care side as well, the wearing rates of maxillofacial prosthetic devices such as maxillofacial prostheses and palatal augmentation prostheses (PAP) have improved, which have contributed to improving patient's stomatognathic function. Tohoku University Hospital has been practicing collaboration between medical and dental professionals and it has produced mutual benefits. Our interprofessional training system based on the medical-dental collaboration could develop professionals who have acquired cross-disciplinary knowledge and skills from experienced doctors.

Clinical course of masticatory function recovery following arthrocentesis in patients with unilateral mandibular condyle head fracture.

The aim of this study was to investigate the clinical course of masticatory function recovery following arthrocentesis. Patients with a unilateral condylar head fracture who underwent arthrocentesis for therapeutic reasons were evaluated and compared with patients with a unilateral condylar head fracture who did not undergo arthrocentesis. At 3 months after treatment, the occlusal contact area and maximum bite force in patients with a fracture treated with arthrocentesis were greater than in those who did not receive arthrocentesis at the same time points, although the differences were not significant. Moreover, at 1 and 3 months following arthrocentesis, mean (±SD) occlusal contact area (1 month: 1.99 ± 0.55 mm2, p = 0.01; 3 months: 2.90 ± 1.36 mm2, p = 0.03) and maximum bite force (1 month: 82.45 ± 15.04 N, p = 0.01; 3 months: 101.11 ± 14.53 N, p = 0.01) on the fractured side in patients who underwent that treatment were significantly reduced when compared with those on the non-fractured side. The authors conclude that if the priority is to avoid open reduction and internal fixation, then the arthrocentesis approach might be a less invasive alternative, albeit with the price of a prolonged healing interval.

Effectiveness and safety of a new dental plaque removal device utilizing micro mist spray for removing oral biofilm in vitro.

BACKGROUND: Removal of oral biofilm from the oral mucosa is essential for preventing risk of respiratory and gastrointestinal infection in elderly people. Currently, no device is available which can remove oral biofilm from oral mucosa effectively and safely. Therefore, the effectiveness and safety of the Micro Scale Mist UNIT (MSM-UNIT), a newly developed dental plaque removal device utilizing high speed sprays of fine water droplets, were evaluated for biofilm removal, including the rate and surface roughness for simulated tooth surface and mucous membrane. METHODS: Simulated tooth and oral mucosa coated with an artificial biofilm of Streptococcus mutans were used for evaluation of effectiveness, with uncoated substrates as the controls. The MSM-UNIT and a conventional air ablation device were operated under recommended instructions. The effectiveness was evaluated from the rate of removal of the biofilm, and the safety was evaluated from the damage observed by scanning electron microscope and surface roughness. RESULTS: The biofilm removal rate of the MSM-UNIT was significantly higher than that of AIRFLOW. Little damage was observed in the area treated by the MSM-UNIT. The surface roughness of the MSM-UNIT treated area on simulated tooth surface and oral mucosa showed no significant difference to the control area. In contrast, cracks and powder were observed in the area treated by AIRFLOW. In particular, the surface roughness of the AIRFLOW treated area for Toughsilon was significantly larger than that of the control. CONCLUSIONS: The MSM-UNIT could be used safely and effectively for removing biofilm not only on simulated tooth surfaces but also simulated mucous membrane. The MSM-UNIT has no harmful effect on teeth or oral mucosa, and may be used for comprehensive oral care for patients during nursing care and the perioperative period.

Hermeticity of a hollow obturator model using CAD and rapid prototyping technologies.

STATEMENT OF PROBLEM: Although closed hollow obturator prostheses provide the benefit of minimized weight, they also pose challenges. They are complex to fabricate, and contaminated water can easily enter the hollow section through the joined part, making them unsanitary and leading to malodor and increased weight. PURPOSE: The purpose of this in vitro study was to investigate the hermeticity and durability of a hollow obturator model fabricated by using computer-aided design (CAD) and rapid prototyping (RP) techniques and to evaluate the possibility of its clinical use. MATERIAL AND METHODS: Leak testing was used to evaluate the hermeticity and durability of hollow spherical obturator specimens with an outer diameter of 30 mm and 2 different wall thicknesses (1.5 and 2.0 mm). Six specimens were fabricated for each of the wall thicknesses by using CAD and RP techniques. The accumulation of fluids in the hollow obturator specimens was evaluated every day by using megascopic observation with photoirradiation from the base of the specimens. The amount of water absorption and the rate of increase in the weight of the 2 specimens were calculated and compared. Statistical analysis was performed by using the Mann-Whitney U test (α=.05). RESULTS: The application of CAD and RP techniques made it possible to fabricate a hollow obturator model specimen with completely unified parts. The 1.5-mm specimen showed an absorption rate (2.61%) that significantly exceeded that of the 2.0-mm specimen (2.53%) on day 130 (P=.006). By the end of the observation period, the 1.5-mm specimen exhibited large amounts of water absorption and destruction. The 1.5-mm-thick wall had reduced hermeticity than the 2.0-mm-thick wall. CONCLUSIONS: A fully unified hollow obturator model with 2.0-mm-thick walls was fabricated by using CAD and RP techniques. The absence of any joints prevented fluid accumulation, making this method suitable for the fabrication of hollow prostheses.

Changes in oral health-related quality of life after oral rehabilitation with dental implants in patients following mandibular tumor resection.

Oral rehabilitation with prosthodontic treatment considerably influences the well-being and quality of life of patients after ablative oral tumor surgery. This study evaluated the effects of implant-supported prostheses (ISPs) on oral health-related quality of life (OHRQoL) and chewing ability in 10 patients who requested ISPs after mandibular oral tumor resection. OHRQoL was assessed using the Japanese version of the Oral Health Impact Profile (OHIP-49) before and one year after ISP placement. Chewing ability, including self-assessed masticatory ability and occlusal force, was examined at one year after ISP placement. The initial mean total OHIP-49 score of 65.3 ± 9.79 decreased to 46.0 ± 8.14 at one year after ISP placement. Mean OHIP-49 score decreased in all domains, whereas self-assessed masticatory ability increased within one year of ISP placement. There were no significant differences between prosthesis types with respect to the mean OHIP-49 score or self-assessed masticatory ability. In conclusion, ISP placement improves OHRQoL and the self-assessed masticatory ability. Moreover, the prosthesis type might not significantly affect OHRQoL.