ABSTRACT
Pseudomorphic transformations are related to chemical conversions of materials while conserving their shape and structural features. Structuring ceramic shapes this way can be used to tailor the physico-chemical properties of materials that can benefit particular applications. In the context of spent nuclear fuel storage interacting with radiolysis products, the sonochemical behavior of powdered UO2 was investigated in dilute aqueous solutions saturated with Ar/(20 %)O2 (20 °C). Optimized parameter settings enabled the complete conversion of UO2 micrometric platelets into uranyl peroxide precipitates, referred to as (meta-)studtite [(UO2(O2)(H2O)2)xH2O] with x = 2 or 4. While the most acidic conditions yielded elongated crystal shapes in agreement with a dissolution/reprecipitation mechanism, softer conditions allowed the pseudomorphic transformation of the platelet shape oxide suggesting a complex formation mechanism. For specific conditions, this unprecedented morphology was accompanied with the formation of a hole in the platelet center. Investigations revealed that the formation of the drilled polymorphs is related to a perfect blend of H+, in-situ generation of H2O2 and high-frequency ultrasound, and is most probably related to the sono-capillary effect. These insights pave the way for new sonochemical approaches dedicated to the preparation of material polymorphs tailoring specific structural properties.
ABSTRACT
Pu(III), Pu(IV), and a higher oxidation state of Pu, likely Pu(VI), are for the first time characterized simultaneously present in a borosilicate glass using Pu M5 edge high energy resolution X-ray absorption near edge structure (HR-XANES) technique. We illustrate that the method can be very efficiently used to determine Pu oxidation states, which control the solubility limit of Pu in a glass matrix. HR-XANES results show that the addition of excess Si3N4 is not sufficient for complete reduction of Pu to Pu(III), which has a relatively high solubility limit (9-22 wt % Pu) due to its network-modifying behavior in glasses. We provide evidence that the initially added Pu(VI) might be partly preserved during vitrification at 1200/1400 °C in Ar atmosphere. Pu(VI) could be very advantageous for vitrification of Pu-rich wastes, since it might reach solubility limits of 40 wt % comparable to U(VI).
ABSTRACT
Safe management of high level nuclear waste is a worldwide significant issue for which vitrification has been selected by many countries. There exists a crucial need for improving our understanding of the ageing of the glass under irradiation. While external irradiation by ions provides a rapid simulation of damage induced by alpha decays, short lived actinide doping is more representative of the reality. Here, we report radiological NMR experiments to compare the damage in International Simplified Glass (ISG) when irradiated by these two methods. In the 0.1 mole percent (244)Cm doped glass, accumulation of high alpha decay only shows small modifications of the local structure, in sharp contrast to heavy ion irradiation. These results reveal the ability of the alpha particle to partially repair the damage generated by the heavy recoil nuclei highlighting the radiation resistance of nuclear glass and the difficulty to accurately simulate its behaviour by single ion beam irradiations.
ABSTRACT
In U(1-x)Am(x)O(2±Î´) compounds with low americium content (x ≤ 20 atom %) and oxygen-to-metal (O/M) ratios close to 2.0, Am(III+) cations are charge-balanced by an equivalent amount of U(V+) cations while the fluorite structure of pure U(IV+)O2 is maintained. Up to now, it is unknown whether this observation also holds for higher americium contents. In this study, we combined X-ray diffraction with Raman and X-ray absorption spectroscopies to investigate a U(0.5)Am(0.5)O(2±Î´) compound. Our results indicate that americium is again only present as Am(III+), while U(V+) remains below the amount required for charge balance. Unlike lower americium contents, this leads to an overall oxygen hypostoichiometry with an average O/M ratio of 1.92(2). The cationic sublattice is only slightly affected by the coexistence of large amounts of reduced (Am(III+)) and oxidized (U(V+)) cations, whereas significant deviations from the fluorite structure are evidenced by both extended X-ray absorption fine structure and Raman spectroscopies in the oxygen sublattice, with the observation of both vacancies and interstitials, the latter being apparently consistent with the insertion of U6O12 cuboctahedral-type clusters (as observed in the U4O9 or U3O7 phases). These results thus highlight the specificities of uranium-americium mixed oxides, which behave more like trivalent lanthanide-doped UO2 than U(1-x)Pu(x)O(2±Î´) MOX fuels.
ABSTRACT
Tumor delineation is a critical aspect in radiotherapy treatment planning and is usually performed with the anatomical images of a computed tomography (CT) scan. For non-small cell lung cancer, it has been recommended to use functional positron emission tomography (PET) images to take into account the biological target characteristics. However, today, there is no satisfactory segmentation technique for PET images in clinical applications. In the present study, a solution to this problem is proposed. The development of the segmentation technique is based on the threshold's adjustment directly from patients, rather than from phantoms. To this end, two references were chosen: measurements performed on CT images of the selected lesions, and histological measurements of surgically removed tumors. The inclusion and exclusion criteria were chosen to produce references that are assumed to have measured tumor sizes equal to the true in vivo tumor sizes. In total, for the two references, 65 lung lesions of 54 patients referred for FDG-PET/CT exams were selected. For validation, measurements of segmented lesions on PET images using this technique were also compared to CT and histological measurements. For lesions greater than 20 mm, our segmentation technique showed a good estimation of histological measurements (mean difference between measured and calculated data equal to -0.8 ± 9.0%) and an acceptable estimation of CT measurements. For lesions smaller than or equal to 20 mm, the method showed disagreement with the measurements derived from histological or CT data. This novel segmentation technique shows high accuracy for the lesions with largest axes between 2 and 4.5 cm. However, it does not correctly evaluate smaller lesions, likely due to the partial volume effect and/or respiratory motions.