Comparison of an Er: YAG laser osteotome versus a conventional drill for the use in osteo- odonto-keratoprosthesis (OOKP).

OBJECTIVES: The osteo-odonto-kerato-prosthesis (OOKP) procedure is a complex, multi-stage, multidisciplinary surgical intervention for the treatment of severe corneal blindness. One step of the OOKP consists of creating a precise hole into a tooth in which an optic cylinder is subsequently inserted; its shape must ensure a perfect watertight fit. The Er: YAG laser (L) used in this study is part of CARLO®, the first laser osteotome that enables surgical planning based on computed tomography data, robot guidance, and a precise execution of laser cuts in teeth and bone tissue, using laser photoablation rather than conventional mechanical methods. The purpose of this study was to assess whether the Er: YAG laser is non-inferior compared to a conventional drill. METHODS: Thirty-two bovine incisors were grounded to a thickness of 1.5 mm. In 16 teeth, a 3.5 mm hole was drilled progressively into each tooth, using dental burs (B) of increasing diameter that were attached to a fixed drill machine. In the other 16 teeth, a hole was created using an Er: YAG laser at a wavelength of 2.94 µm (Part of CARLO®). In seven teeth of each group, the cylinder was inserted and fixated with polymethylmethacrylate (PMMA) bone cement. In the remaining seven teeth of each group, the cylinder was inserted without fixation material (press-fit). After bonding and drying, all specimens were stored in water until force measurements were recorded using a uniaxial traction machine. The force required to move the optical cylinder out of the hole in the tooth was measured using an Instron 3344 testing system. Scanning electron microscope (SEM) and light microscope (LM) visualization of the holes created with the laser and the drill were performed in two teeth (SEM)/four teeth (LM) per method. RESULTS: Significant differences (P < 0.001) were found for the following parameters: B PMMA versus B press-fit; B PMMA versus L press-fit; L PMMA versus B press-fit; L PMMA-L press-fit. This shows that PMMA bone cement fixation is superior to press-fit. No significant differences were found between B PMMA-L PMMA (P = 0.93) and B press-fit-L press-fit (P = 0.83). The SEM pictures showed a smoother surface using L. CONCLUSIONS: The laser cut holes were as strong as bur-drilled holes, although SEM pictures showed a smoother surface of the laser cut holes. Hence, laser osteotomes open the possibility to custom fit the hole exactly to the width of the cylinder, which represents a potential advantage of the laser over the conventional bur. Lasers Surg. Med. 51:531-537, 2019. © 2019 Wiley Periodicals, Inc.

Comparison of Imaging Softwares for Upper Airway Evaluation: Preliminary Study.

The interest about upper airway evaluation has increased lately. Therefore, many softwares have been developed aiming to improve and facilitate the analysis of airway volume. The objective of this study was to compare two different softwares packages, Mimics and Dolphin, in their accuracy and precision in upper airway space measurements. Preoperative cone beam computed tomography scans of nine nonsyndromic patients submitted to surgically assisted rapid maxillary expansion were included in this study. The imaging exams were converted to DICOM (digital imaging and communications in medicine) files and imported to the softwares. The mean volume for the Dolphin group (G1) was 10.791 cm 3 (SD = 4.269 cm 3 ) and for the Mimics group (G2) was 10.553 cm 3 (SD = 4.564 cm 3 ). There was no statistically significant difference between the two groups ( p = 0.105).

Comparative microstructural analysis of bone osteotomies after cutting by computer-assisted robot-guided laser osteotome and piezoelectric osteotome: an in vivo animal study.

Most industrial laser applications utilize computer and robot assistance, for guidance, safety, repeatability, and precision. In contrast, medical applications using laser systems are mostly conducted manually. The advantages can be effective only when the system is coupled to a robotic guidance, as operating by hand does not reach the required accuracy. We currently developed the first laser osteotome which offers preoperative planning based on CT data, robot guidance, and a precise execution of the laser cuts. In an animal trial, our system was used to create a grid pattern of the same depth on the inner layer of parietal bone in 12 adult sheep. The same bone cuts were done with piezoelectric osteotome on the contralateral side. The micro-CT and histological analysis showed more new mineralized bone in the laser group compared to the piezoelectric group. As well, a cutting pattern with especially a constant osteotomy depth in the laser group was demonstrated. The here presented autonomous osteotomy tool shows not only an advantage in early bone healing stage but additionally sharp bone cuts with a very high accuracy and freely selectable design cuts.

[Cone beam computed tomography and radiation dosage: application frequency and knowledge of dentists in Switzerland]. / Digitale Volumentomographie und Strahlenbelastung: Kenntnisstand, Anwendungsfrequenz und Indikationsspektrum bei Schweizer Zahnärzten.

The use of cone beam computed tomography (CBCT) among Swiss dentists increases from year to year. The aim of this study was to investigate the application frequency and the knowledge about CBCT and radiation dosage in a representative Swiss dentist sample. A standardized questionnaire about knowledge on CBCT was personally handed out or sent by post to 1,000 dentists in Switzerland (return postage was free of charge). 278 dentists returned the questionnaire. Descriptive statistics, correlation analysis of general variables and written answers of the questionnaires were evaluated. Most dentists were aware of radiation dosage and potential use of the CBCT and are interested in continuing education on CBCT.

Prediction of cranio-maxillofacial surgical planning using an inverse soft tissue modelling approach.

In cranio-maxillofacial surgery, the determination of a proper surgical plan is an important step to attain a desired aesthetic facial profile and a complete denture closure. In the present paper, we propose an efficient modeling approach to predict the surgical planning on the basis of the desired facial appearance and optimal occlusion. To evaluate the proposed planning approach, the predicted osteotomy plan of six clinical cases that underwent CMF surgery were compared to the real clinical plan. Thereafter, simulated soft-tissue outcomes were compared using the predicted and real clinical plan. This preliminary retrospective comparison of both osteotomy planning and facial outlook shows a good agreement and thereby demonstrates the potential application of the proposed approach in cranio-maxillofacial surgical planning prediction.

Anatomically-driven soft-tissue simulation strategy for cranio-maxillofacial surgery using facial muscle template model.

We propose a computationally efficient and bio-mechanically relevant soft-tissue simulation method for cranio-maxillofacial (CMF) surgery. A template-based facial muscle reconstruction was introduced to minimize the efforts on preparing a patient-specific model. A transversely isotropic mass-tensor model (MTM) was adopted to realize the effect of directional property of facial muscles in reasonable computation time. Additionally, sliding contact around teeth and mucosa was considered for more realistic simulation. Retrospective validation study with postoperative scan of a real patient showed that there were considerable improvements in simulation accuracy by incorporating template-based facial muscle anatomy and sliding contact.

A new soft-tissue simulation strategy for cranio-maxillofacial surgery using facial muscle template model.

We propose a computationally efficient, bio-mechanically relevant soft-tissue simulation method for cranio-maxillofacial (CMF) surgery. Special emphasis is given to comply with the current clinical workflow. A template-based facial muscle prediction was introduced to avoid laborious segmentation from medical images. In addition, transversely isotropic mass-tensor model (MTM) was applied to realize the directional behavior of facial muscles in short computation time. Finally, sliding contact was incorporated to mimic realistic boundary condition in error-sensitive regions. Mechanical simulation result was compared with commercial finite element software. And retrospective validation study with post-operative scan of four CMF cases was performed.

[Soft tissue surgery with the diode laser--theoretical and clinical aspects]. / Weichteilchirurgie mit dem Diodenlaser--theoretische und klinische Aspekte.

Currently laser light of different wavelengths is used for all kinds of surgical procedures in oral and maxillofacial surgery. In this regard especially the diode laser is mainly used, because of its excellent effects on oral soft tissues. On the basis of various oral soft tissue lesions in 40 patients the benefits of the diode laser in daily practice are demonstrated. Intraoperative and postoperative clinical findings were excellent due to the sufficient cutting abilities, the good coagulation effect and the extremely small zone of thermal necrosis to surrounding tissues. By this the diode laser has proven as an alternative solution to conventional electrosurgery and scalpel. The precise treatment in the contact application mode, which allowed an easier and more controlled guidance of the laser beam, was another advantage of the fiber-assisted laser system. In conclusion the results show that the diode laser is a useful instrument in oral soft tissue surgery.

Quantitative scanning acoustic microscopy compared to microradiography for assessment of new bone formation.

Recently, it has been shown that quantitative scanning acoustic microscopy (SAM) is a powerful tool to image the acoustic impedance of even inhomogeneous materials like bone. Therefore, the aim of our study was to compare SAM to conventional microradiography with respect to histomorphometrical assessment of undecalcified sections of newly formed bone. Forty specimens were harvested 12 weeks after implantation of either autogenous cancellous bone graft or 5.0 mg of Osteogenic Protein-1 (BMP-7) in a critical-sized defect model in sheep. Undecalcified transverse bone sections of 500 microm thickness were investigated with conventional microradiography and SAM. Linear regression analysis was carried out to compare the measurements of the area of new bone formation within the defect sites. Both methods allowed for good discrimination between newly formed bone and cortical bone at the edges of the former defect. Images obtained with SAM revealed a better resolution and sharpness compared to that of microradiographs since SAM imaging unlike microradiography does not depend on the thickness of bone sections. The results of quantitative histomorphometric analysis obtained by both methods showed no significant differences, and it was possible to predict 90% of the variability of each method (coefficient of determination r2 = 0.90; P < 0.0001). In conclusion, SAM offers comparable quantitative histomorphometric information with a better spatial resolution than conventional microradiography. Thus, SAM is a promising new micro-visualizing technique for basic bone research.