Structural analysis of synthetic polymer mixtures using ion mobility and tandem mass spectrometry.

Ion mobility (IM) combined with tandem mass spectrometry (MS/MS) has been employed to separate and differentiate between polyether oligomers with the same nominal molecular weights. Poly(ethylene glycol)s with the same nominal mass-to-charge ratio (m/z), but with differing structures, were separated using ion mobility. IM-MS/MS data were able to aid identification of the backbone and end groups of the four individual polyethers in the two sets of isobaric mixtures. The MS/MS data from the resolved oligomers enabled a detailed structural characterization of the polyether mixtures to be completed in one experiment.

End-group characterisation of poly(propylene glycol)s by means of electrospray ionisation-tandem mass spectrometry (ESI-MS/MS).

The end-group functionalisation of a series of poly(propylene glycol)s has been characterised by means of electrospray ionisation-tandem mass spectrometry (ESI-MS/MS). A series of peaks with mass-to-charge ratios that are close to that of the precursor ion were used to generate information on the end-group functionalities of the poly(propylene glycol)s. Fragment ions resulting from losses of both of the end groups were noted from some of the samples. An example is presented of how software can be used to significantly reduce the length of time involved in data interpretation (which is typically the most time-consuming part of the analysis).

Novel software for the assignment of peaks from tandem mass spectrometry spectra of synthetic polymers.

Novel software has been developed to aid the interpretation of tandem mass spectrometry (MS/MS) data from synthetic polymers. The software is particularly focused toward aiding the end-group determination of these materials by significantly speeding up the interpretation process. This allows information on the initiator and/or chain transfer agents, used to generate the polymer, and the mechanism of termination to be inferred from the data much more rapidly. The software allows the validity of hypothesized structures to be rapidly tested by automatically annotating the data file using previously proposed fragmentation rules for synthetic polymers. Low-energy collision-induced dissociation (CID) data from methacrylate, styrene, and polyether oligomers are used as example data for the software. Exact-mass CID information was used to aid the understanding of the dissociation mechanism of the polymers. The software can use exact-mass data to provide more confidence in the results. The MS/MS results indicate that the fragmentation pathways are those previously proposed for these polymers.

The rapid characterisation of poly(ethylene glycol) oligomers using desorption electrospray ionisation tandem mass spectrometry combined with novel product ion peak assignment software.

A rapid method for the characterisation of polyglycol esters and ethers is described which uses accurate mass desorption electrospray ionisation (DESI) quadrupole time-of-flight mass spectrometry (Q-ToFMS). The results are combined with newly developed software which aids the interpretation of product ions produced using collision-induced dissociation (CID) of selected precursor ions. The poly(ethylene glycol) (PEG) samples analysed were PEG dibenzoate, PEG monooleate, PEG butyl ether, PEG bis(2-ethyl hexanoate) and PEG diacrylate. Lithium metal was used for cationisation of the PEG oligomers since it yielded the most useful structural information compared with other group I metals. The full scan mass spectra and product ion mass spectra were all obtained in <5 s. Interpretation of the MS/MS product ion spectra, using the product ion interpretation software which incorporates previously developed fragmentation rules, was carried out in <1 s.

Generation of end-group information from polyethers by matrix-assisted laser desorption/ionisation collision-induced dissociation mass spectrometry.

A series of polyethers, namely poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG), poly(butylene glycol) (PBG) and poly(tetramethylene glycol) (PTMeG), has been characterised by means of matrix-assisted laser desorption/ionisation collision-induced dissociation (MALDI-CID) using a hybrid sector orthogonal-time-of-flight (TOF) instrument. The data indicate that this technique can be used to generate information about the end-group functionality of these polymers, including in some cases information about branching of the alkyl chains of the initiating groups. Proposals are made for the fragmentation pathways for these polymers.

Desorption electrospray ionisation mass spectrometry and tandem mass spectrometry of low molecular weight synthetic polymers.

A range of low molecular weight synthetic polymers has been characterised by means of desorption electrospray ionisation (DESI) combined with both mass spectrometry (MS) and tandem mass spectrometry (MS/MS). Accurate mass experiments were used to aid the structural determination of some of the oligomeric materials. The polymers analysed were poly(ethylene glycol) (PEG), polypropylene glycol (PPG), poly(methyl methacrylate) (PMMA) and poly(alpha-methyl styrene). An application of the technique for characterisation of a polymer used as part of an active ingredient in a pharmaceutical tablet is described. The mass spectra and tandem mass spectra of all of the polymers were obtained in seconds, indicating the sensitivity of the technique.

Gas-phase conformations of cationized poly(styrene) oligomers.

The gas-phase conformations of poly(styrene) oligomers cationized by Li+, Na+, Cu+, and Ag+ (M+ PSn) were examined using ion mobility experiments and molecular mechanics/ dynamics calculations. M+PSn ions were formed by MALDI and their ion-He collision cross-sections were measured by ion mobility methods. The experimental collision cross-sections of each M+PS n-mer were similar for all four metal cations and increased linearly with n. Molecular modeling of selected M+ PS oligomers cationized by Li+ and Na+ yielded quasi-linear structures with the metal cation sandwiched between two phenyl groups. The relative energies of the structures were approximately 2-3 kcal/mol more stable when the metal cation was sandwiched near the middle of the oligomer chain than when it was near the ends of the oligomer. The cross-sections of these theoretical structures agree well with the experimental values with deviations typically around 1-2%. The calculations also show that the metal cation tends to align the phenyl groups on the same side of the -CH2-CH- backbone. Calculations on neutral poly(styrene), on the other hand, showed structures in which the phenyl groups were more randomly positioned about the oligomer backbone. The conformations and metal-oligomer binding energies of M+PS are also used to help explain CID product distributions and fragmentation mechanisms of cationized PS oligomers. etry