Effective intracellular release of ibuprofen triggered by thermosensitive magnetic nanocarriers.

Stimuli-responsive nanocarriers are being widely applied in the development of new strategies for the diagnosis and treatment of diseases. An inherent difficulty in general drug therapy is the lack of precision with respect to a specific pathological site, which can lead to toxicity, excessive drug consumption, or premature degradation. In this work, the controlled drug delivery is achieved by using magnetite nanoparticles coated with mesoporous silica with core-shell structure (MMS) and grafted with the thermoresponsive polymer poly [N-isopropylacrylamide-co-3-(trimethoxysilyl)propyl methacrylate] (MMS-P). The efficiency of MMS-P as a temperature-controlled drug delivery system was evaluated by in vitro release experiments using ibuprofen (IBU) in various mammalian cell models. Further, the effects of IBU as a photoprotectant in cells exposed to photodynamic therapy (PDT) in a carbaryl-induced neurodegenerative model were evaluated. The results showed that MMS-P nanocarriers do not exhibit cytotoxicity in HepG2 cells at high doses such as 7600 µg mL-1. Pre-incubation of MMS-P charged with IBU showed no effect on the PDT in N2A cells; however, it produced a further decrease in the viability of HepG2 cells, leading to a reduction to PDT resistance. On the other hand, a cytoprotective effect against carbaryl toxicity in N2A cells was observed in IBU administrated by MMS-P, which confirms the effective intracellular IBU uptake by means of MMS-P. These results encourage the potential application of MMS-P as a drug delivery system and confirm the effect of IBU as a cytoprotective agent in a neurodegenerative model.

Ocular Drug Delivery: A Special Focus on the Thermosensitive Approach.

The bioavailability of ophthalmic therapeutics is reduced because of the presence of physiological barriers whose primary function is to hinder the entry of exogenous agents, therefore also decreasing the bioavailability of locally administered drugs. Consequently, repeated ocular administrations are required. Hence, the development of drug delivery systems that ensure suitable drug concentration for prolonged times in different ocular tissues is certainly of great importance. This objective can be partially achieved using thermosensitive drug delivery systems that, owing to their ability of changing their state in response to temperature variations, from room to body temperature, may increase drug bioavailability. In the case of topical instillation, in situ forming gels increase pre-corneal drug residence time as a consequence of their enhanced adhesion to the corneal surface. Otherwise, in the case of intraocular and periocular, i.e., subconjunctival, retrobulbar, peribulbar administration, among others, they have the undoubted advantage of being easily injectable and, owing to their sudden thickening at body temperature, have the ability to form an in situ drug reservoir. As a result, the frequency of administration can be reduced, also favoring the patient's adhesion to therapy. In the main section of this review, we discuss some of the most common treatment options for ocular diseases, with a special focus on posterior segment treatments, and summarize the most recent improvement deriving from thermosensitive drug delivery strategies. Aside from this, an additional section describes the most widespread in vitro models employed to evaluate the functionality of novel ophthalmic drug delivery systems.

Synthesis and in vitro testing of thermoresponsive polymer-grafted core-shell magnetic mesoporous silica nanoparticles for efficient controlled and targeted drug delivery.

In this work, thermoresponsive polymer grafted magnetic mesoporous silica nanoparticles were prepared, fully characterized and tested as controlled drug delivery systems. For this purpose, iron oxide nanoparticles coated with mesoporous silica shell were grafted with poly(N-isopropylacrylamide-co-3-(methacryloxypropyl)trimethoxysilane) (PNIPAM-co-MPS). The grafting and polymerization on the as-prepared nanoparticles were performed in one-step procedure. Using this methodology, the polymer was successfully grafted mainly onto the silica surface, leaving the mesopores empty for the drug loading. The prepared hybrid nanoparticles (MMSNP-PNIPAM-co-MPS) showed high magnetization saturation (19.5 emu g-1) and high specific surface area (505 m2 g-1) and pore volume (0.29 cm3 g-1). Ibuprofen was used as a model drug to test the performance of the hybrid particles as thermosensitive drug delivery systems. For this, in vitro drug delivery tests were conducted below (25 °C) and above (40 °C) the lower critical solution temperature (LCST) of the polymer (PNIPAM-co-MPS). Considerable difference (80%) in the ibuprofen release at these two temperatures and a fast and complete release of the drug at 40 °C was observed. These results suggest that the thermoresponsive copolymer acts as a gatekeeper for the temperature-controlled release of the drug loaded inside the mesopores. Therefore, MMSNP-PNIPAM-co-MPS are promising magnetic and thermoresponsive nanocarriers for targeted delivery of therapeutic substances.

Poly (N-isopropylacrylamide) based hydrogels as novel precipitation and stabilization media for solid lipid nanoparticles (SLNs).

In this work, poly(N-isopropylacrylamide) (PNIPAM) based chemically cross-linked hydrogels are used as novel precipitation and stabilization media for solid lipid nanoparticles (SLNs) for the first time. The hydrogels and the hybrid thermoresponsive composite hydrogels with SLNs were characterized by SEM, DSC, DLS and rheometric analysis. The results showed that the SLNs obtained directly in the gel matrix by the newly devised method were well-dispersed and remained stable for one month. A remarkable advantage of this approach is that it yields the thermoresponsive nanocomposite hydrogels in a single step. This approach is a significant advancement in the preparation of hybrid thermoresponsive nanocomposite systems based on smart gels and SLNs for their use in biomedical applications.

Packed hybrid silica nanoparticles as sorbents with thermo-switchable surface chemistry and pore size for fast extraction of environmental pollutants.

Thermoresponsive poly(N-isopropylacrylamide)-grafted silica nanoparticles (SiNPs) have been synthesized and fully characterized by ATR-FTIR, TGA, HRTEM, BET and DLS analysis. Hybrid solid phase extraction (SPE) beds with tuneable pore size and switchable surface chemistry were prepared by packing the polymer-grafted nanoparticles inside SPE cartridges. The cartridges were tested by checking the thermo-regulated elution of model compounds, namely methylene blue, caffeine and amoxicillin. Extraction of the analytes and regeneration of the interaction sites on the sorbent surface was carried out entirely in water solution by changing the external temperature below and above the lower critical solution temperature (LCST) of the polymer. The results demonstrate that the elution of model compounds depends on the temperature-regulated size of the inter-particle voids and on the change of surface properties of the PNIPAM-grafted nanoparticles from hydrophilic to hydrophobic.

Poly(NIPAM-co-MPS)-grafted multimodal porous silica nanoparticles as reverse thermoresponsive drug delivery system.

Hybrid drug delivery systems (DDS) have been prepared by grafting poly(NIPAM-co-MPS) chains on multimodal porous silica nanoparticles having an inner mesoporous structure and an outer thin layer of micropores. The hybrid thermoresponsive DDS were fully characterized and loaded with a model drug. The in vitro drug release tests are carried out at below and above the lower critical solution temperature (LCST) of the copolymer. The results have revealed that due to the presence of small diameter (~1.3 nm) micropores at the periphery of the particles, the collapsed globules of the thermoresponsive copolymer above its LCST hinders the complete release of the drug which resulted in a reverse thermoresponsive drug release profile by the hybrid DDS.

Polystyrene-block-poly(ethylene oxide) copolymers as templates for stacked, spherical large-mesopore silica coatings: dependence of silica pore size on the PS/PEO ratio.

Large-mesopore silica films with a narrow pore size distribution and high porosity have been obtained by a sol-gel reaction of a silicon oxide precursor (TEOS) and using polystyrene-block-poly(ethylene oxide) (PS-b-PEO) copolymers as templates in an acidic environment. PS-b-PEO copolymers with different molecular weight and composition have been studied in order to assess the effects of the block length on the pore size of the templated silica films. The changes in the morphology of the porous systems have been investigated by transmission electron microscopy and a systematic analysis has been carried out, evidencing the dependence between the hydrophilic/hydrophobic ratio of the two polymer blocks and the size of the final silica pores. The obtained results prove that by tuning the PS/PEO ratio, the pore size of the templated silica films can be easily and finely predicted.

Thermoresponsive mesoporous silica nanoparticles as a carrier for skin delivery of quercetin.

Recently, mesoporous silica nanoparticles (MSNs) have emerged as promising drug delivery systems able to preserve the integrity of the carried substance and/or to selectively reach a target site; however, they have rarely been explored for skin application. In this study, thermoresponsive MSNs, designed to work at physiologic cutaneous temperature, are proposed as innovative topical carriers for quercetin (Q), a well-known antioxidant. The thermosensitive nanoparticles were prepared by functionalizing two different types of matrices, with pore size of 3.5nm (MSNsmall) and 5.0nm (MSNbig), carrying out a free radical copolymerization of N-isopropylacrylamide (NIPAM) and 3-(methacryloxypropyl)trimethoxysilane (MPS) inside the mesopores. The obtained copolymer-grafted MSNs (copoly-MSNs) were physico-chemically characterized and their biocompatibility was attested on a human keratinocyte cell line (HaCaT). The release profiles were assessed and the functional activity of Q, free or loaded, was evaluated in terms of antiradical and metal chelating activities. Ex vivo accumulation and permeation through porcine skin were also investigated. The characterization confirmed the copolymer functionalization of the MSNs. In addition, both the bare and functionalized silica matrices were found to be biocompatible. Among the copolymer-grafted complexes, Q/copoly-MSNbig exhibited more evident thermoresponsive behavior proving the potential of these thermosensitive systems for advanced dermal delivery.

Folic acid-conjugated 4-amino-phenylboronate, a boron-containing compound designed for boron neutron capture therapy, is an unexpected agonist for human neutrophils and platelets.

Boron neutron capture therapy (BNCT) is an anticancer treatment based on the accumulation in the tumor cells of (10) B-containing molecules and subsequent irradiation with low-energy neutrons, which bring about the decay of (10) B to very toxic (7) Li(3+) and (4) He(2+) ions. The effectiveness of BNCT is limited by the low delivery and accumulation of the used (10) B-containing compounds. Here, we report the development of folic acid-conjugated 4-amino-phenylboronate as a novel possible compound for the selective delivery of (10) B in BNCT. An extensive analysis about its biocompatibility to mature blood cells and platelet progenitors revealed that the compound markedly supports platelet aggregation, neutrophil oxidative burst, and inhibition of megakaryocyte development, while it does not have any manifest effect on red blood cells.

Sensitivity of different resistant tumour cell lines to the two novel compounds (2Z,4E)-2-methylsulfanyl-5-(1-naphthyl)-4-nitro-2,4-pentadienoate and (1E,3E)-1,4-bis(2-naphthyl)-2,3-dinitro-1,3-butadiene.

The inhibition of cell proliferation by methyl (2Z,4E)-2-methylsulfanyl-5-(1-naphthyl)-4-nitro-2,4-pentadienoate (1-Naph-NMCB) and (1E,3E)-1,4-bis(2-naphthyl)-2,3-dinitro-1,3-butadiene (2-Naph-DNB) has been studied in vitro against four cell lines selected for their resistance to doxorubicin, cisplatin, taxol and 5-fluorouracil. In previous experiments both compounds showed good in vitro antiproliferative, cytotoxic and pro-apoptotic activities against cell lines of different histologic origin. The results of the experiments presented here suggest that 1-Naph-NMCB is able to overcome all of the different mechanisms of resistance showed by the resistant cell lines used for our experiments. On the contrary, when we used the taxol-resistant A549-T12 cell line, characterized by a mechanism of resistance due to a mutation of the target site of taxol on microtubules, it displayed a partial but significant cross-resistance to 2-Naph-DNB. Although the actual mechanism of this cross-resistance has not yet been definitively elucidated, our results from immunostaining of microtubules suggest that it may be linked to the presence of a shared target site for taxol and 2-Naph-DNB on microtubules.