ABSTRACT
Solid-state lithium-based batteries offer higher energy density than their Li-ion counterparts. Yet they are limited in terms of negative electrode discharge performance and require high stack pressure during operation. To circumvent these issues, we propose the use of lithium-rich magnesium alloys as suitable negative electrodes in combination with Li6PS5Cl solid-state electrolyte. We synthesise and characterise lithium-rich magnesium alloys, quantifying the changes in mechanical properties, transport, and surface chemistry that impact electrochemical performance. Increases in hardness, stiffness, adhesion, and resistance to creep are quantified by nanoindentation as a function of magnesium content. A decrease in diffusivity is quantified with 6Li pulsed field gradient nuclear magnetic resonance, and only a small increase in interfacial impedance due to the presence of magnesium is identified by electrochemical impedance spectroscopy which is correlated with x-ray photoelectron spectroscopy. The addition of magnesium aids contact retention on discharge, but this must be balanced against a decrease in lithium diffusivity. We demonstrate via electrochemical testing of symmetric cells at 2.5 MPa and 30∘C that 1% magnesium content in the alloy increases the stripping capacity compared to both pure lithium and higher magnesium content alloys by balancing these effects.
ABSTRACT
Non-aqueous potassium-ion batteries (KIBs) represent a promising complementary technology to lithium-ion batteries due to the availability and low cost of potassium. Moreover, the lower charge density of K+ compared to Li+ favours the ion-transport properties in liquid electrolyte solutions, thus, making KIBs potentially capable of improved rate capability and low-temperature performance. However, a comprehensive study of the ionic transport and thermodynamic properties of non-aqueous K-ion electrolyte solutions is not available. Here we report the full characterisation of the ionic transport and thermodynamic properties of a model non-aqueous K-ion electrolyte solution system comprising potassium bis(fluorosulfonyl)imide (KFSI) salt and 1,2-dimethoxyethane (DME) solvent and compare it with its Li-ion equivalent (i.e., LiFSI:DME), over the concentration range 0.25-2 molal. Using tailored K metal electrodes, we demonstrate that KFSI:DME electrolyte solutions show higher salt diffusion coefficients and cation transference numbers than LiFSI:DME solutions. Finally, via Doyle-Fuller-Newman (DFN) simulations, we investigate the K-ion and Li-ion storage properties for Kâ£â£graphite and Liâ£â£graphite cells.
