Radical induced intermolecular linkage and energy level modifications of a porphyrin monolayer.

A new method to directly modify the surface structure and energy levels of a porphyrin monolayer was examined in the molecular scale using scanning tunneling microscopy and spectroscopy (STM and STS) and presented in this communication. The exposure to atomic oxygen has induced highly ordered surface cross-linking and changed the occupied and unoccupied orbital levels of a cobalt(ii) octaethyl porphyrin (CoOEP) monolayer, and as a result, the HOMO-LUMO gap was reduced by ∼10%. Counterintuitively, the STM/STS data indicated that the reactive central Co atoms did not participate in the gas-surface reactions. Reflection-absorption infrared spectroscopy (RAIRS) measurements further indicated that the STM observed intermolecular linkages are stabilized via hydrogen bonding. This CoOEP + O˙ system also illustrates an example that the six-fold surface packing symmetry predominates the four-fold molecular symmetry in producing a three-fold symmetric surface cross-linking structure.

Orientation-free and differentially pumped addition of a low-flux reactive gas beam to a surface analysis system.

We describe an example of a piecewise gas chamber that can be customized to incorporate a low flux of gas-phase radicals with an existing surface analysis chamber for in situ and stepwise gas-surface interaction experiments without any constraint in orientation. The piecewise nature of this gas chamber provides complete angular freedom and easy alignment and does not require any modification of the existing surface analysis chamber. In addition, the entire gas-surface system is readily differentially pumped with the surface chamber kept under ultra-high-vacuum during the gas-surface measurements. This new design also allows not only straightforward reconstruction to accommodate the orientation of different surface chambers but also for the addition of other desired features, such as an additional pump to the current configuration. Stepwise interaction between atomic oxygen and a highly ordered pyrolytic graphite surface was chosen to test the effectiveness of this design, and the site-dependent O-atom chemisorption and clustering on the graphite surface were resolved by a scanning tunneling microscope in the nm-scale. X-ray photoelectron spectroscopy was used to further confirm the identity of the chemisorbed species on the graphite surface as oxygen.

A new variable temperature solution-solid interface scanning tunneling microscope.

We present a new solution-solid (SS) interface scanning tunneling microscope design that enables imaging at high temperatures with low thermal drift and with volatile solvents. In this new design, distinct from the conventional designs, the entire microscope is surrounded in a controlled-temperature and controlled-atmosphere chamber. This allows users to take measurements at high temperatures while minimizing thermal drift. By incorporating an open solution reservoir in the chamber, solvent evaporation from the sample is minimized; allowing users to use volatile solvents for temperature dependent studies at high temperatures. The new design enables the user to image at the SS interface with some volatile solvents for long periods of time (>24 h). An increase in the nonlinearity of the piezoelectric scanner in the lateral direction as a function of temperature is addressed. A temperature dependent study of cobalt(II) octaethylporphyrin (CoOEP) at the toluene/Au(111) interface has been performed with this instrument. It is demonstrated that the lattice parameters remain constant within experimental error from 24 °C to 75 °C. Similar quality images were obtained over the entire temperature range. We report the unit cell of CoOEP at the toluene/Au(111) interface (based on two molecules per unit cell) to be A = (1.36 ± 0.04) nm, B = (2.51 ± 0.04) nm, and α = 97° ± 2°.