A highly crystalline anthracene-based MOF-74 series featuring electrical conductivity and luminescence.

Recently, a small group of metal-organic frameworks (MOFs) has been discovered featuring substantial charge transport properties and electrical conductivity, hence promising to broaden the scope of potential MOF applications in fields such as batteries, fuel cells and supercapacitors. In combination with light emission, electroactive MOFs are intriguing candidates for chemical sensing and optoelectronic applications. Here, we incorporated anthracene-based building blocks into the MOF-74 topology with five different divalent metal ions, that is, Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, resulting in a series of highly crystalline MOFs, coined ANMOF-74(M). This series of MOFs features substantial photoluminescence, with ANMOF-74(Zn) emitting across the whole visible spectrum. The materials moreover combine this photoluminescence with high surface areas and electrical conductivity. Compared to the original MOF-74 materials constructed from 2,5-dihydroxy terephthalic acid and the same metal ions Zn2+, Mg2+, Ni2+, Co2+ and Mn2+, we observed a conductivity enhancement of up to six orders of magnitude. Our results point towards the importance of building block design and the careful choice of the embedded MOF topology for obtaining materials with desired properties such as photoluminescence and electrical conductivity.

Excited-State Dynamics in Fully Conjugated 2D Covalent Organic Frameworks.

Covalent organic frameworks (COFs) are a highly versatile group of porous materials constructed from molecular building blocks, enabling deliberate tuning of their final bulk properties for a broad range of applications. Understanding their excited-state dynamics is essential for identifying suitable COF materials for applications in electronic devices such as transistors, photovoltaic cells, and water-splitting electrodes. Here, we report on the ultrafast excited-state dynamics of a series of fully conjugated two-dimensional (2D) COFs in which different molecular subunits are connected through imine bonds, using transient absorption spectroscopy. Although these COFs feature different topologies and chromophores, we find that excited states behave similarly across the series. We therefore present a unified model in which charges are generated through rapid singlet-singlet annihilation and show lifetimes of several tens of microseconds. These long-lived charges are of particular interest for optoelectronic devices, and our results point toward the importance of controlling the singlet-singlet annihilation step in order to increase the yield of separated charges.

Oriented Thin Films of Electroactive Triphenylene Catecholate-Based Two-Dimensional Metal-Organic Frameworks.

Two-dimensional triphenylene-based metal-organic frameworks (TP-MOFs) attract significant scientific interest due to their long-range order combined with significant electrical conductivity. The deposition of these structures as oriented films is expected to promote their incorporation into diverse optoelectronic devices. However, to date, a controlled deposition strategy applicable for the different members of this MOF family has not been reported yet. Herein, we present the synthesis of highly oriented thin films of TP-MOFs by vapor-assisted conversion (VAC). We targeted the M-CAT-1 series comprising hexahydroxytriphenylene organic ligands and metal-ions such as Ni2+, Co2+, and Cu2+. These planar organic building blocks are connected in-plane to the metal-ions through a square planar node forming extended sheets which undergo self-organization into defined stacks. Highly oriented thin Ni- and Co-CAT-1 films grown on gold substrates feature a high surface coverage with a uniform film topography and thickness ranging from 180 to 200 nm. The inclusion of acid modulators in the synthesis enabled the growth of films with a preferred orientation on quartz and on conductive substrates such as indium-doped tin oxide (ITO). The van der Pauw measurements performed across the M-CAT-1 films revealed high electrical conductivity values of up to 10-3 S cm-1 for both the Ni- and Co-CAT-1 films. Films grown on quartz allowed for a detailed photophysical characterization by means of UV-vis, photoluminescence, and transient absorption spectroscopy. The latter revealed the existence of excited states on a nanosecond time scale, sufficiently long to demonstrate a photoinduced charge generation and extraction in Ni-CAT-1 films. This was achieved by fabricating a basic photovoltaic device with an ITO/Ni-CAT-1/Al architecture, thus establishing this MOF as a photoactive material. Our results point to the intriguing capabilities of these conductive M-CAT-1 materials and an additional scope of applications as photoabsorbers enabled through VAC thin-film synthesis.

Scaffold-Induced Diketopyrrolopyrrole Molecular Stacks in a Covalent Organic Framework.

In recent years, covalent organic frameworks (COFs) have attracted considerable attention due to their crystalline and porous nature, which positions them as intriguing candidates for diverse applications such as catalysis, sensing, or optoelectronics. The incorporation of dyes or semiconducting moieties into a rigid two-dimensional COF can offer emergent features such as enhanced light harvesting or charge transport. However, this approach can be challenging when dealing with dye molecules that exhibit a large aromatic backbone, since the steric demand of solubilizing side chains also needs to be integrated into the framework. Here, we report the successful synthesis of DPP2-HHTP-COF consisting of diketopyrrolopyrrole (DPP) diboronic acid and hexahydroxytriphenylene (HHTP) building blocks. The well-known boronate ester coupling motif guides the formation of a planar and rigid backbone and long-range molecular DPP stacks, resulting in a highly crystalline and porous material. DPP2-HHTP-COF exhibits excellent optical properties including strong absorption over the visible spectral range, broad emission into the NIR and a singlet lifetime of over 5 ns attributed to the formation of molecular stacks with J-type interactions between the DPP subcomponents in the COF. Electrical conductivity measurements of crystalline DPP2-HHTP-COF pellets revealed conductivity values of up to 10-6 S cm-1.

Light-Driven Molecular Dynamics in Perylenes with Medium-Controlled Emission.

Highly fluorescent light emitters with medium-tunable clear colors were obtained from the skeleton of perylenedicarboximide by the attachment of donor-substituted aryl groups at the peri-position. The 4-methoxynaphthyl derivative 3a is preferred because of its strong solvatochromism in fluorescence where a mechanism of incomplete PLICT is made responsible both for the large Stokes' shift and the strong medium influence on fluorescence, allowing the fine tuning of color.

Cobalt-Catalyzed Electrophilic Aminations with Anthranils: An Expedient Route to Condensed Quinolines.

The reaction of various organozinc pivalates with anthranils provides anilines derivatives, which cyclize under acidic conditions providing condensed quinolines. Using alkenylzinc pivalates, electron-rich arylzinc pivalates or heterocyclic zinc pivalates produces directly the condensed quinolines of which several structures belong to new heterocyclic scaffolds. These N-heterocycles are of particular interest for organic light emitting diodes with their high photoluminescence quantum yields and long exciton lifetimes as well as for hole-transporting materials in methylammonium lead iodide perovskites solar cells due to an optimal band alignment for holes and a large bandgap.

Enforcing Extended Porphyrin J-Aggregate Stacking in Covalent Organic Frameworks.

The potential of covalent organic frameworks (COFs) for realizing porous, crystalline networks with tailored combinations of functional building blocks has attracted considerable scientific interest in the fields of gas storage, photocatalysis, and optoelectronics. Porphyrins are widely studied in biology and chemistry and constitute promising building blocks in the field of electroactive materials, but they reveal challenges regarding crystalline packing when introduced into COF structures due to their nonplanar configuration and strong electrostatic interactions between the heterocyclic porphyrin centers. A series of porphyrin-containing imine-linked COFs with linear bridges derived from terephthalaldehyde, 2,5-dimethoxybenzene-1,4-dicarboxaldehyde, 4,4'-biphenyldicarboxaldehyde and thieno[3,2- b]thiophene-2,5-dicarboxaldehyde, were synthesized, and their structural and optical properties were examined. By combining X-ray diffraction analysis with density-functional theory (DFT) calculations on multiple length scales, we were able to elucidate the crystal structure of the newly synthesized porphyrin-based COF containing thieno[3,2- b]thiophene-2,5-dicarboxaldehyde as linear bridge. Upon COF crystallization, the porphyrin nodes lose their 4-fold rotational symmetry, leading to the formation of extended slipped J-aggregate stacks. Steady-state and time-resolved optical spectroscopy techniques confirm the realization of the first porphyrin J-aggregates on a > 50 nm length scale with strongly red-shifted Q-bands and increased absorption strength. Using the COF as a structural template, we were thus able to force the porphyrins into a covalently embedded J-aggregate arrangement. This approach could be transferred to other chromophores; hence, these COFs are promising model systems for applications in photocatalysis and solar light harvesting, as well as for potential applications in medicine and biology.

Preparation of Polyfunctional Naphthyridines by Cobalt-Catalyzed Cross-Couplings of Halogenated Naphthyridines with Magnesium and Zinc Organometallics.

CoCl2 (5%) catalyzes cross-couplings of various halogenated naphthyridines with alkyl- and arylmagnesium halides. Also, arylzinc halides undergo smooth cross-couplings with various naphthyridines in the presence of CoCl2·2LiCl (5%) and sodium formate (50%), leading to polyfunctional arylated naphthyridines. Two of these arylated naphthyridines are highly fluorescent, with quantum efficiencies reaching 95% and long excited-state lifetimes of up to 12 ns.

Regioisomer effects of [70]fullerene mono-adduct acceptors in bulk heterojunction polymer solar cells.

Despite numerous organic semiconductors being developed during the past decade, C70 derivatives are predominantly used as electron acceptors in efficient polymer solar cells (PSCs). However, as-prepared C70 mono-adducts intrinsically comprise regioisomers that would mask individual device performances depending on the substituent position on C70. Herein, we separate the regioisomers of C70 mono-adducts for PSC applications for the first time. Systematic investigations of the substituent position effect using a novel symmetric C70 mono-adduct ([70]NCMA) and a prevalent, high-performance one ([70]PCBM) reveals that we can control the structures of the blend films with conjugated polymers and thereby improve the PSC performances by regioisomer separation. Our approach demonstrates the significance of exploring the best-matching regioisomer of C70 mono-adducts with high-performance conjugated polymers, which would achieve a remarkable progress in PSC devices.

Visualizing excitations at buried heterojunctions in organic semiconductor blends.

Interfaces play a crucial role in semiconductor devices, but in many device architectures they are nanostructured, disordered and buried away from the surface of the sample. Conventional optical, X-ray and photoelectron probes often fail to provide interface-specific information in such systems. Here we develop an all-optical time-resolved method to probe the local energetic landscape and electronic dynamics at such interfaces, based on the Stark effect caused by electron-hole pairs photo-generated across the interface. Using this method, we found that the electronically active sites at the polymer/fullerene interfaces in model bulk-heterojunction blends fall within the low-energy tail of the absorption spectrum. This suggests that these sites are highly ordered compared with the bulk of the polymer film, leading to large wavefunction delocalization and low site energies. We also detected a 100 fs migration of holes from higher- to lower-energy sites, consistent with these charges moving ballistically into more ordered polymer regions. This ultrafast charge motion may be key to separating electron-hole pairs into free charges against the Coulomb interaction.

What Controls the Rate of Ultrafast Charge Transfer and Charge Separation Efficiency in Organic Photovoltaic Blends.

In solar energy harvesting devices based on molecular semiconductors, such as organic photovoltaics (OPVs) and artificial photosynthetic systems, Frenkel excitons must be dissociated via charge transfer at heterojunctions to yield free charges. What controls the rate and efficiency of charge transfer and charge separation is an important question, as it determines the overall power conversion efficiency (PCE) of these systems. In bulk heterojunctions between polymer donor and fullerene acceptors, which provide a model system to understand the fundamental dynamics of electron transfer in molecular systems, it has been established that the first step of photoinduced electron transfer can be fast, of order 100 fs. But here we report the first study which correlates differences in the electron transfer rate with electronic structure and morphology, achieved with sub-20 fs time resolution pump-probe spectroscopy. We vary both the fullerene substitution and donor/fullerene ratio which allow us to control both aggregate size and the energetic driving force for charge transfer. We observe a range of electron transfer times from polymer to fullerene, from 240 fs to as short as 37 fs. Using ultrafast electro-optical pump-push-photocurrent spectroscopy, we find the yield of free versus bound charges to be weakly dependent on the energetic driving force, but to be very strongly dependent on fullerene aggregate size and packing. Our results point toward the importance of state accessibility and charge delocalization and suggest that energetic offsets between donor and acceptor levels are not an important criterion for efficient charge generation. This provides design rules for next-generation materials to minimize losses related to driving energy and boost PCE.

Influence of interfacial area on exciton separation and polaron recombination in nanostructured bilayer all-polymer solar cells.

The macroscopic device performance of organic solar cells is governed by interface physics on a nanometer scale. A comb-like bilayer all-polymer morphology featuring a controlled enhancement in donor-acceptor interfacial area is employed as a model system to investigate the fundamental processes of exciton separation and polaron recombination in these devices. The different nanostructures are characterized locally by SEM/AFM, and the buried interdigitating interface of the final device architecture is statistically verified on a large area via advanced grazing incidence X-ray scattering techniques. The results show equally enhanced harvesting of photoexcitons in both donor and acceptor materials directly correlated to the total enhancement of interfacial area. Apart from this beneficial effect, the enhanced interface leads to significantly increased polaron recombination losses both around the open-circuit voltage and maximum power point, which is determined in complement with diode dark current characteristics, impedance spectroscopy, and transient photovoltage measurements. From these findings, it is inferred that a spatially optimized comb-like donor-acceptor nanonetwork alone is not the ideal morphology even though often postulated. Instead, the energetic landscape has to be considered. A perfect morphology for an excitonic solar cell must be spatially and energetically optimized with respect to the donor-acceptor interface.

Nanostructured conformal hybrid solar cells: a promising architecture towards complete charge collection and light absorption.

We introduce hybrid solar cells with an architecture consisting of an electrodeposited ZnO nanorod array (NRA) coated with a conformal thin layer (<50 nm) of organic polymer-fullerene blend and a quasi-conformal Ag top contact (Thin/NR). We have compared the performance of Thin/NR cells to conventional hybrid cells in which the same NRAs are completely filled with organic blend (Thick/NR). The Thin/NR design absorbs at least as much light as Thick/NR cells, while charge extraction is significantly enhanced due to the proximity of the electrodes, resulting in a higher current density per unit volume of blend and improved power conversion efficiency. The NRAs need not be periodic or aligned and hence can be made very simply.