ABSTRACT
Poly(lactic acid) (PLA) is one of the most used biobased and biodegradable polymers. Due to their high stability, some of the newest grades of PLA are only degradable under severe industrial conditions. For these grades, mechanical recycling is a viable end-of-life option, with great environmental advantages. However, the polymer undergoes degradation during its service life and in the melt reprocessing, which leads to a decrease in properties that can compromise the recyclability of PLA. The goal of this work was to evaluate the usefulness of adding small amounts of two organic fillers, chitosan, and silk fibroin nanoparticles, during the recycling process for improving the properties of the recycled plastic. The degradation level of the aged polymer and the nature and amount of filler affect the performance of the recycled plastics. The fillers reduce the degradation during the melt reprocessing of PLA previously subjected to severe hydrolysis, thus increasing the intrinsic viscosity of the recycled plastic. A careful selection of the added organic filler lead to recycled plastics with improvements in some key mechanical, thermal, and barrier properties. Thus, the use of organic fillers represents a cost-effective and environmentally sound way for improving the mechanical recycling of bioplastics.
Subject(s)
Polyesters , Recycling , Plastics , Polymers , ViscosityABSTRACT
Molecular dynamics (MD) simulation, by employing the COMPASS force field, was utilized to investigate structural and thermal characteristics as well as interfacial interactions between components of nanocomposite consisting of poly(lactic acid) (PLA)/natural rubber (NR)/nanosilica, abbreviated as PSxN, where 1 ≤ x ≤ 7 and it represents the parts of SiO2 nanoparticles added to the PLA/NR (PN) blend. Analysis of the obtained results including density (ρ), fractional free volume (FFV), glass transition temperature (Tg), interaction energy (Einteraction), and radial distribution function (RDF) of these nanocomposites was performed. Comparing Einteraction of nanocomposites with that of the PN blend showed that the interactions between the chains of the two polymers are highly dependent on the added amounts of silica nanoparticles, so that by adding silica to the PN blend to obtain PS1N and PS3N nanocomposites, the amount of Einteraction was reduced to a smaller positive value, which indicates the tendency of the nanocomposite's components to interact with each other. By further addition of silica nanoparticles to have PS5N and PS7N nanocomposites and then by analysis of the RDF results, it was found that the nanoparticles were not well dispersed in these two nanocomposites and they were accumulated in the NR rubbery phase. Therefore, the percolation threshold for silica loading on the PN blend is at most 3 parts (x = 3). These results as well as the other obtained simulation results were compared with the available experimental data, and the agreement observed between them approved the simulation procedure and validated the obtained results.
ABSTRACT
In this paper, intercalation of nanoclay in the miscible polymer blend of poly(vinylidene fluoride) (PVDF) and acrylic rubber(ACM) was studied. X-ray diffraction was used to investigate the formation of nanoscale polymer blend/clay hybrid. Infrared spectroscopy and X-ray analysis revealed the coexistence of ß and γ crystalline forms in PVDF/Clay nanocomposite while α crystalline form was found to be dominant in PVDF/ACM/Clay miscible hybrids. Flory-Huggins interaction parameter (B) was used to further explain the miscibility phenomenon observed. The B parameter was determined by combining the melting point depression and the binary interaction model. The estimated B values for the ternary PVDF/ACM/Clay and PVDF/ACM pairs were all negative, showing both proper intercalation of the polymer melt into the nanoclay galleries and the good miscibility of PVDF and ACM blend. The B value for the PVDF/ACM blend was almost the same as that measured for the PVDF/ACM/Clay hybrid, suggesting that PVDF chains in nanocomposite hybrids interact with ACM chains and that nanoclay in hybrid systems is wrapped by ACM molecules.
