ABSTRACT
Natural fibres have proven to be a potential alternative to replace synthetic fibres in some composite materials applications. However, drawbacks such as impregnation difficulties and the poor fibre-matrix interface limit the use of natural fibres in high-performance applications. This work proposes using an acrylic resin to coat the fibre surface to enhance the interfacial compatibility among fique fibres and polyester resin. Pull-out tests revealed an improvement in the interfacial shear strength of about 110% for coated fibres. Furthermore, nanoindentation test, Micro Raman spectroscopy and scanning electronic microscopy indicated that the acrylic resin eliminates the gap at the fibre/matrix interface seen in the uncoated fibres. Observed behaviour could be attributed to a better chemical bonding between the fibre and matrix and is also hypothesised that the elastic characteristic of the coating helps to transfer loads effectively from the matrix to the fibre.
ABSTRACT
The three-dimensional printing (3DP) also known as the additive manufacturing (AM), a novel and futuristic technology that facilitates the printing of multiscale, biomimetic, intricate cytoarchitecture, function-structure hierarchy, multi-cellular tissues in the complicated micro-environment, patient-specific scaffolds, and medical devices. There is an increasing demand for developing 3D-printed products that can be utilized for organ transplantations due to the organ shortage. Nowadays, the 3DP has gained considerable interest in the tissue engineering (TE) field. Polylactide (PLA) and polycaprolactone (PCL) are exemplary biomaterials with excellent physicochemical properties and biocompatibility, which have drawn notable attraction in tissue regeneration. Herein, the recent advancements in the PLA and PCL biodegradable polymer-based composites as well as their reinforcement with hydrogels and bio-ceramics scaffolds manufactured through 3DP are systematically summarized and the applications of bone, cardiac, neural, vascularized and skin tissue regeneration are thoroughly elucidated. The interaction between implanted biodegradable polymers, in-vivo and in-vitro testing models for possible evaluation of degradation and biological properties are also illustrated. The final section of this review incorporates the current challenges and future opportunities in the 3DP of PCL- and PLA-based composites that will prove helpful for biomedical engineers to fulfill the demands of the clinical field.
