ABSTRACT
This manuscript investigates the system performance of hybrid wireless and power line communication networks for indoor Internet of Things applications. Differentiating itself from the existing literature, the performance of the direct link and dual-hop energy harvesting relay-aided links is analyzed under the condition of indoor fading modeled by log-normal distribution. Moreover, the manuscript presents the analytical expressions of the successful transmission probability of the deployed opportunistic decode-and-forward and amplify-and-forward relay selection scheme, and validates them with Monte Carlo simulations. Moreover, the impact of different system parameters on the successful transmission probability is revealed. For the considered hybrid system, in general, the opportunistic decode-and-forward relaying scheme outperforms the opportunistic amplify-and-forward relaying scheme. As importantly, increasing the source to relay distance and power splitting ratio over certain limits significantly deteriorates the system performance, indicated by the decrease in the successful transmission probability.
ABSTRACT
With the increased number of Software-Defined Networking (SDN) installations, the data centers of large service providers are becoming more and more agile in terms of network performance efficiency and flexibility. While SDN is an active and obvious trend in a modern data center design, the implications and possibilities it carries for effective and efficient network management are not yet fully explored and utilized. With most of the modern Internet traffic consisting of multimedia services and media-rich content sharing, the quality of multimedia communications is at the center of attention of many companies and research groups. Since SDN-enabled switches have an inherent feature of monitoring the flow statistics in terms of packets and bytes transmitted/lost, these devices can be utilized to monitor the essential statistics of the multimedia communications, allowing the provider to act in case of network failing to deliver the required service quality. The internal packet processing in the SDN switch enables the SDN controller to fetch the statistical information of the particular packet flow using the PacketIn and Multipart messages. This information, if preprocessed properly, can be used to estimate higher layer interpretation of the link quality and thus allowing to relate the provided quality of service (QoS) to the quality of user experience (QoE). This article discusses the experimental setup that can be used to estimate the quality of speech communication based on the information provided by the SDN controller. To achieve higher accuracy of the result, latency characteristics are added based on the exploiting of the dummy packet injection into the packet stream and/or RTCP packet analysis. The results of the experiment show that this innovative approach calculates the statistics of each individual RTP stream, and thus, we obtain a method for dynamic measurement of speech quality, where when quality decreases, it is possible to respond quickly by changing routing at the network level for each individual call. To improve the quality of call measurements, a Convolutional Neural Network (CNN) was also implemented. This model is based on two standard approaches to measuring the speech quality: PESQ and E-model. However, unlike PESQ/POLQA, the CNN-based model can take delay into account, and unlike the E-model, the resulting accuracy is much higher.
Subject(s)
Computer Communication Networks , Speech , Algorithms , Machine Learning , SoftwareABSTRACT
The technologies of the Internet of Things (IoT) have an increasing influence on our daily lives. The expansion of the IoT is associated with the growing number of IoT devices that are connected to the Internet. As the number of connected devices grows, the demand for speed and data volume is also greater. While most IoT network technologies use cloud computing, this solution becomes inefficient for some use-cases. For example, suppose that a company that uses an IoT network with several sensors to collect data within a production hall. The company may require sharing only selected data to the public cloud and responding faster to specific events. In the case of a large amount of data, the off-loading techniques can be utilized to reach higher efficiency. Meeting these requirements is difficult or impossible for solutions adopting cloud computing. The fog computing paradigm addresses these cases by providing data processing closer to end devices. This paper proposes three possible network architectures that adopt fog computing for LoRaWAN because LoRaWAN is already deployed in many locations and offers long-distance communication with low-power consumption. The architecture proposals are further compared in simulations to select the optimal form in terms of total service time. The resulting optimal communication architecture could be deployed to the existing LoRaWAN with minimal cost and effort of the network operator.
