Controlling microstructure of pentacene derivatives by solution processing: impact of structural anisotropy on optoelectronic properties.

The consideration of anisotropic structural properties and their impact on optoelectronic properties in small-molecule thin films is vital to understand the performance of devices incorporating crystalline organic semiconductors. Here we report on the important relationship between structural and optoelectronic anisotropy in aligned, functionalized-pentacene thin films fabricated using the solution-based zone-casting technique. The microstructure of thin films composed of 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) and 6,13-bis(triethylsilylethynyl)pentacene (TES-pentacene) is systematically controlled by varying the casting speed. By controlling the structural alignment, we were able to experimentally decouple, for the first time in these films, an intramolecular absorption transition dipole (at ∼440 nm) oriented close to the pentacene short axis and an intermolecular absorption transition dipole (at ∼695 nm) oriented predominantly along the conjugated pentacene-pentacene core stacking axis (crystallographic a-axis) in both films. Using the intermolecular absorption as a signature for intermolecular delocalization, much higher optical dichroism was obtained in TES-pentacene (16 ± 6) than TIPS-pentacene (3.2 ± 0.1), which was attributed to the 1D packing structure of TES-pentacene compared to the 2D packing structure of TIPS-pentacene. This result was also supported by field-effect mobility anisotropy measurements of the films, with TES-pentacene exhibiting a higher anisotropy (∼21-47, depending on the casting speed) than TIPS-pentacene (∼3-10).

Understanding the relationship between molecular order and charge transport properties in conjugated polymer based organic blend photovoltaic devices.

We report a detailed characterization of the thin film morphology of all-polymer blend devices by applying a combined analysis of physical, chemical, optical, and charge transport properties. This is exemplified by considering a model system comprising poly(3-hexylthiophene) (P3HT) and poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT). We show that the interactions between the two conjugated polymer components can be controlled by pre-forming the P3HT into highly ordered nanowire structures prior to blending with F8BT, and by varying the molecular weight of the F8BT. As a result, it is possible to produce films containing highly ordered P3HT with hole mobilities enhanced by three orders of magnitude over the pristine blends. Raman spectroscopy under resonant excitation conditions is used to probe the molecular order of both P3HT and F8BT phases within the blend films and these morphological studies are complemented by measurements of photocurrent generation. The resultant increase in photocurrent is associated with the enhanced charge carrier mobilities. The complementary analytical method demonstrated here is applicable to a wide range of polymer blend systems for all applications where the relationships between morphology and device performance are of interest.

Effects of a heavy atom on molecular order and morphology in conjugated polymer:fullerene photovoltaic blend thin films and devices.

We study the molecular order and morphology in poly(3-hexylthiophene) (P3HT) and poly(3-hexylselenophene) (P3HS) thin films and their blends with [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM). We find that substitution of the sulfur atoms in the thiophene rings of P3HT by heavy selenium atoms increases the tendency of the molecules to form better ordered phase; interestingly, their overall fraction of ordered phase is much lower than that of P3HT-based films. The higher tendency of P3HS molecules to order (aggregate) is consistent with more planar chain conformation simulated. The lower fraction of ordered phase (or the higher fraction of disordered phase) in P3HS-based films is clearly identified by in-plane skeleton Raman modes under resonant excitation conditions, such as a smaller ratio of the C═C modes associated with the ordered (∼1422 cm(-1)) and disordered (∼1446 cm(-1)) phases (I(1422 cm(-1))/I(1446 cm(-1)) = 1.4 for P3HS and 0.6 for P3HS:PCBM), compared with P3HT-based films (I(1449 cm(-1))/I(1470 cm(-1)) = 2.5 for P3HT and 1.0 for P3HT:PCBM) and a larger Raman dispersion of the C═C mode: P3HS (17 cm(-1)) versus P3HT (6 cm(-1)) and P3HS:PCBM (36 cm(-1)) versus P3HT:PCBM films (23 cm(-1)). The higher fraction of disordered phase in P3HS prevents the formation of micrometer-sized PCBM aggregates in blend films during thermal annealing. Importantly, this lower fraction but better quality of ordered phase in P3HS molecules strongly influences P3HS:PCBM photovoltaic performance, producing smaller short-circuit current (J(sc)) in pristine devices, but significantly larger increase in J(sc) after annealing compared to P3HT:PCBM devices. Our results clarify the effects of heavy atom substitution in low band gap polymers and their impact on blend morphology and device performance. Furthermore, our study clearly demonstrates resonant Raman spectroscopy as a simple, but powerful, structural probe which provides important information about "fraction/quantity of ordered phase" of molecules, not easily accessible using traditional X-ray-based techniques.

Thin-film morphology of inkjet-printed single-droplet organic transistors using polarized Raman spectroscopy: effect of blending TIPS-pentacene with insulating polymer.

We report thin-film morphology studies of inkjet-printed single-droplet organic thin-film transistors (OTFTs) using angle-dependent polarized Raman spectroscopy. We show this to be an effective technique to determine the degree of molecular order as well as to spatially resolve the orientation of the conjugated backbones of the 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-Pentacene) molecules. The addition of an insulating polymer, polystyrene (PS), does not disrupt the π-π stacking of the TIPS-Pentacene molecules. Blending in fact improves the uniformity of the molecular morphology and the active layer coverage within the device and reduces the variation in molecular orientation between polycrystalline domains. For OTFT performance, blending enhances the saturation mobility from 0.22 ± 0.05 cm(2)/(V·s) (TIPS-Pentacene) to 0.72 ± 0.17 cm(2)/(V·s) (TIPS-Pentacene:PS) in addition to improving the quality of the interface between TIPS-Pentacene and the gate dielectric in the channel, resulting in threshold voltages of ∼0 V and steep subthreshold slopes.

The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films.

The nature of main in-plane skeleton Raman modes (C=C and C-C stretch) of poly(3-hexylthiophene) (P3HT) in pristine and its blend thin films with [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) is studied by resonant and nonresonant Raman spectroscopy and Raman simulations. Under resonant conditions, the ordered phase of P3HT with respect to its disordered phase is identified by (a) a large shift in the C=C mode peak position to lower wavenumber (~21 cm(-1) shift), (b) a narrower fwhm of the C=C mode (~9 cm(-1) narrower), (c) a larger intensity of the C-C mode relative to the C=C mode (~56% larger), and (d) a very small Raman dispersion (~5 cm(-1)) of the C=C mode. The behavior of the C=C and C-C modes of the ordered and disordered phases of P3HT can be explained in terms of different molecular conformations. The C=C mode of P3HT in P3HT:PCBM blend films can be reproduced by simple superposition of the two peaks observed in different phases of P3HT (ordered and disordered). We quantify the molecular order of P3HT after blending with PCBM and the subsequent thermal annealing to be 42 ± 5% and 94 ± 5% in terms of the fraction of ordered P3HT phase, respectively. The increased molecular order of P3HT in blends upon annealing correlates well with enhanced device performance (J(SC), -4.79 to -8.72 mA/cm(2) and PCE, 1.07% to 3.39%). We demonstrate that Raman spectroscopy (particularly under resonant conditions) is a simple and powerful technique to study molecular order of conjugated polymers and their blend films.

Tuning the electronic coupling in a low-bandgap donor-acceptor copolymer via the placement of side-chains.

We present a spectroscopic and theoretical investigation of the effect of the presence and position of hexyl side-chains in the novel low-bandgap alternating donor-acceptor copolymer poly[bis-N,N-(4-octylphenyl)-bis-N,N-phenyl-1,4-phenylenediamine-alt-5,5'-4',7',-di-2-thienyl-2',1',3'-benzothiadiazole] (T8TBT). We use electronic absorption and Raman spectroscopic measurements supported by calculations of chain conformation, electronic transitions, and Raman modes. Using these tools, we find that sterically demanding side-chain configurations induce twisting in the electronic acceptor unit and reduce the electronic interaction with the donor. This leads to a blue-shifted and weakened (partial) charge-transfer absorption band together with a higher photoluminescence efficiency. On the other hand, sterically relaxed side-chain configurations promote coupling between donor and acceptor units and exhibit enhanced absorption at the expense of luminescence efficiency. The possibility of tuning the donor-acceptor character of conjugated polymers by varying the placement of side-chains has very important ramifications for light emitting diode, Laser, display, and photovoltaic device optimization.

Genomic analyses of anaerobically induced genes in Saccharomyces cerevisiae: functional roles of Rox1 and other factors in mediating the anoxic response.

DNA arrays were used to investigate the functional role of Rox1 in mediating acclimatization to anaerobic conditions in Saccharomyces cerevisiae. Multiple growth conditions for wild-type and rox1 null strains were used to identify open reading frames with a statistically robust response to this repressor. These results were compared to those obtained for a wild-type strain in response to oxygen availability. Transcripts of nearly one-sixth of the genome were differentially expressed (P < 0.05) with respect to oxygen availability, the majority (>65%) being down-regulated under anoxia. Of the anaerobically induced genes, about one-third (106) contain putative Rox1-binding sites in their promoters and were significantly (P < 0.05) up-regulated in the rox1 null strains under aerobiosis. Additional promoter searches revealed that nearly one-third of the anaerobically induced genes contain an AR1 site(s) for the Upc2 transcription factor, suggesting that Upc2 and Rox1 regulate the majority of anaerobically induced genes in S. cerevisiae. Functional analyses indicate that a large fraction of the anaerobically induced genes are involved in cell stress (approximately 1/3), cell wall maintenance (approximately 1/8), carbohydrate metabolism (approximately 1/10), and lipid metabolism (approximately 1/12), with both Rox1 and Upc2 predominating in the regulation of this latter group and Upc2 predominating in cell wall maintenance. Mapping the changes in expression of functional regulons onto metabolic pathways has provided novel insight into the role of Rox1 and other trans-acting factors in mediating the physiological response of S. cerevisiae to anaerobic conditions.