Real-Time XANES Measurement of Se Reduction by Zerovalent Iron in a Flow-through Cell, and Accompanying Se Isotope Measurements.

An anoxic flow-through cell experiment was conducted to examine mechanisms controlling the real-time reduction of selenate (Se(VI)) by zerovalent iron (ZVI), which is commonly used in permeable reactive barriers to treat dissolved contaminants including Se(VI). Changes in selenium (Se) isotope composition were examined by increasing the influent Se concentration over time, thus changing the proportion of Se removed from solution. At the conclusion of the experiment, an anoxic Se-free solution was pumped through the cell to assess the stability of the reaction products. At all stages, X-ray absorption data were obtained from the solid phase and Se isotope data from the aqueous phase. Reduced Se in the form of adsorbed Se(IV), Fe2SeO4, Se(0), and iron selenides accumulated on the ZVI over time. A linear regression function was fit to the δ82/76Se values of the effluent, yielding an isotopic separation of 9.6‰. A Rayleigh curve was fit to the isotope data from the effluent samples collected during the rinse stage with an effective fractionation of 2.4‰. The results from this experiment can be used to elucidate the effect of multiple concurrent mechanisms on Se isotope behavior.

Dual Mechanism Conceptual Model for Cr Isotope Fractionation during Reduction by Zerovalent Iron under Saturated Flow Conditions.

Chromium isotope analysis is rapidly becoming a valuable complementary tool for tracking Cr(VI) treatment in groundwater. Evaluation of various treatment materials has demonstrated that the degree of isotope fractionation is a function of the reaction mechanism, where reduction of Cr(VI) to Cr(III) induces the largest fractionation. However, it has also been observed that uniform flow conditions can contribute complexity to isotope measurements. Here, laboratory batch and column experiments were conducted to assess Cr isotope fractionation during Cr(VI) reduction by zerovalent iron under both static and saturated flow conditions. Isotope measurements were accompanied by traditional aqueous geochemical measurements (pH, Eh, concentrations) and solid-phase analysis by scanning electron microscopy and X-ray absorption spectroscopy. Increasing δ(53)Cr values were associated with decreasing Cr(VI) concentrations, which indicates reduction; solid-phase analysis showed an accumulation of Cr(III) on the iron. Reactive transport modeling implemented a dual mechanism approach to simulate the fractionation observed in the experiments. The faster heterogeneous reaction pathway was associated with minimal fractionation (ε=-0.2‰), while the slower homogeneous pathway exhibited a greater degree of fractionation (ε=-0.9‰ for the batch experiment, and ε=-1.5‰ for the column experiment).

Reactive transport modeling of chromium isotope fractionation during Cr(VI) reduction.

Chromium isotope fractionation is indicative of mass-transfer processes, such as reduction of Cr(VI) to Cr(III) during groundwater remediation. Laboratory experiments comparing batch and column treatment of Cr(VI) using organic carbon suggest that the associated isotope fractionation may be influenced by solute-transport mechanisms. These batch and column experiments were simulated using the reactive transport model MIN3P to further evaluate the effects of Cr reduction and transport on isotope fractionation under saturated flow conditions. Simulation of the batch experiment provided a good fit to the experimental data, where a fractionation factor (α53) of 0.9965 was attributed to a single, dominant Cr(VI) removal mechanism. Calibration of the column simulations to the experimental results suggested the presence of a second, more rapid Cr(VI) removal mechanism with α53 = 0.9992. Results from this study demonstrate that the interpretation of Cr isotope fractionation during reduction can be complex, particularly where multiple removal mechanisms are evident. Reactive transport modeling of Cr isotope fractionation can provide a quantitative assessment of the contaminant removal mechanisms, thus improving the application of Cr isotope measurements as a tool to track Cr(VI) migration and attenuation in groundwater.

Chromium isotope fractionation during reduction of Cr(VI) under saturated flow conditions.

Chromium isotopes are potentially useful indicators of Cr(VI) reduction reactions in groundwater flow systems; however, the influence of transport on Cr isotope fractionation has not been fully examined. Laboratory batch and column experiments were conducted to evaluate isotopic fractionation of Cr during Cr(VI) reduction under both static and controlled flow conditions. Organic carbon was used to reduce Cr(VI) in simulated groundwater containing 20 mg L(-1) Cr(VI) in both batch and column experiments. Isotope measurements were performed on dissolved Cr on samples from the batch experiments, and on effluent and profile samples from the column experiment. Analysis of the residual solid-phase materials by scanning electron microscopy (SEM) and by X-ray absorption near edge structure (XANES) spectroscopy confirmed association of Cr(III) with organic carbon in the column solids. Decreases in dissolved Cr(VI) concentrations were coupled with increases in δ(53)Cr, indicating that Cr isotope enrichment occurred during reduction of Cr(VI). The δ(53)Cr data from the column experiment was fit by linear regression yielding a fractionation factor (α) of 0.9979, whereas the batch experiments exhibited Rayleigh-type isotope fractionation (α = 0.9965). The linear characteristic of the column δ(53)Cr data may reflect the contribution of transport on Cr isotope fractionation.