Balloon-expandable cobalt chromium stent versus self-expandable nitinol stent for the Atherosclerotic Iliac Arterial Disease (SENS-ILIAC Trial) Trial: a randomized controlled trial.

Iliac artery angioplasty with stenting is an effective alternative treatment modality for aortoiliac occlusive diseases. Few randomized controlled trials have compared the efficacy and safety between self-expandable stent (SES) and balloon-expandable stent (BES) in atherosclerotic iliac artery disease. In this randomized, multicenter study, patients with common or external iliac artery occlusive disease were randomly assigned in a 1:1 ratio to either BES or SES. The primary end point was the 1-year clinical patency, defined as freedom from any surgical or percutaneous intervention due to restenosis of the target lesion after the index procedure. The secondary end point was a composite event from major adverse clinical events at 1 year. A total of 201 patients were enrolled from 17 major cardiovascular intervention centers in South Korea. The mean age of the enrolled patients was 66.8 ± 8.5 years and 86.2% of the participants were male. The frequency of critical limb ischemia was 15.4%, and the most common target lesion was in the common iliac artery (75.1%). As the primary end point, the 1-year clinical patency as primary end point was 99% in the BES group and 99% in the SES group (p > 0.99). The rate of repeat revascularization at 1 year was 7.8% in the BES group and 7.0% in the SES group (p = 0.985; confidence interval, 1.011 [0.341-2.995]). In our randomized study, the treatment of iliac artery occlusive disease with self-expandable versus balloon-expandable stent was comparable in 12-month clinical outcomes without differences in the procedural success or geographic miss rate regardless of the deployment method in the distal aortoiliac occlusive lesion (ClinicalTrials.gov, NCT01834495).

Effect of Carbon Nanotubes on Chloride Diffusion, Strength, and Microstructure of Ultra-High Performance Concrete.

This study delved into the integration of carbon nanotubes (CNTs) in Ultra-High Performance Concrete (UHPC), exploring aspects such as mechanical properties, microstructure analysis, accelerated chloride penetration, and life service prediction. A dispersed CNT solution (0.025 to 0.075 wt%) was employed, along with a superplasticizer, to ensure high flowability in the UHPC slurry. In addition, the combination of high-strength functional artificial lightweight aggregate (ALA) and micro hollow spheres (MHS) was utilized as a replacement for fine aggregate to not only reduce the weight of the concrete but also to increase its mechanical performance. Experimental findings unveiled that an increased concentration of CNT in CNT1 (0.025%) and CNT2 (0.05%) blends led to a marginal improvement in compressive strength compared to the control mix. Conversely, the CNT3 (0.075%) mixture exhibited a reduction in compressive strength with a rising CNT content as an admixture. SEM analysis depicted that the heightened concentration of CNTs as an admixture induced the formation of nanoscale bridges within the concrete matrix. Ponding test results indicated that, for all samples, the effective chloride transport coefficient remained below the standard limitation of 1.00 × 10-12 m2/s, signifying acceptable performance in the ponding test for all samples. The life service prediction outcomes affirmed that, across various environmental scenarios, CNT1 and CNT2 mixtures consistently demonstrated superior performance compared to all other mixtures.

Hair Thickness Growth Effect of Adenosine Complex in Male-/Female-Patterned Hair Loss via Inhibition of Androgen Receptor Signaling.

Aging (senescence) is an unavoidable biological process that results in visible manifestations in all cutaneous tissues, including scalp skin and hair follicles. Previously, we evaluated the molecular function of adenosine in promoting alopecia treatment in vitro. To elucidate the differences in the molecular mechanisms between minoxidil (MNX) and adenosine, gene expression changes in dermal papilla cells were examined. The androgen receptor (AR) pathway was identified as a candidate target of adenosine for hair growth, and the anti-androgenic activity of adenosine was examined in vitro. In addition, ex vivo examination of human hair follicle organ cultures revealed that adenosine potently elongated the anagen stage. According to the severity of alopecia, the ratio of the two peaks (terminal hair area/vellus hair area) decreased continuously. We further investigated the adenosine hair growth promoting effect in vivo to examine the hair thickness growth effects of topical 5% MNX and the adenosine complex (0.75% adenosine, 1% penthenol, and 2% niacinamide; APN) in vivo. After 4 months of administration, both the MNX and APN group showed significant increases in hair density (MNX + 5.01% (p < 0.01), APN + 6.20% (p < 0.001)) and thickness (MNX + 5.14% (p < 0.001), APN + 10.32% (p < 0.001)). The inhibition of AR signaling via adenosine could have contributed to hair thickness growth. We suggest that the anti-androgenic effect of adenosine, along with the evaluation of hair thickness distribution, could help us to understand hair physiology and to investigate new approaches for drug development.

A Rare Case of Stroke in a 76-Year-Old Woman: Left Atrial Papillary Fibroelastoma as the Culprit.

BACKGROUND Papillary fibroelastoma is the most common type of benign primary cardiac tumor and is usually asymptomatic. However, tumor fragments or surface thrombus can embolize and cause transient ischemic attacks, strokes, or myocardial infarction. This report describes a 76-year-old woman who presented with dysarthria and right-sided weakness due to a stroke associated with a left atrial papillary fibroelastoma. CASE REPORT A 76-year-old woman visited the Emergency Department because she had right-sided weakness and dysarthria from 12 h ago. Brain magnetic resonance image was done at the Emergency Department, showing multiple small embolic, acute infarction in left basal ganglia and fronto-temporo-parietal lobes. Transthoracic and transesophageal echocardiogram showed a hypermobile echogenic mass (0.8×1.5 cm) with villous surface on the orifice of left atrial appendage. Twenty-four-hour Holter monitoring was performed to evaluate the cause of cerebral infarction, and there was no paroxysmal atrial fibrillation. Thoracic computed tomography angiography also showed a sea anemone-shaped mass around the left atrial appendage. Cardiac tumor excision was done via a lower partial sternotomy. Histopathologic analysis showed multiple delicate fronds, and the avascular fibroelastic cores were lined by a single layer of CD31-positive endothelial cells. Histopathologic findings were consistent with papillary fibroelastoma. The patient was discharged without any other complications on day 30 of hospitalization. CONCLUSIONS This case highlights the importance of cardiac imaging in patients with acute stroke, including transthoracic and transesophageal echocardiography, which can show the typical imaging features of papillary fibroelastoma and other intracardiac sources of embolus.

Influence of Casting Variables on Release Kinetics of Orally Disintegrating Film.

As a new form for supplying vitamin C, orally disintegrating films (ODFs) were developed C based on hyaluronic acid (HA) under varying casting conditions and the properties were analyzed. The films with different thicknesses (2, 3, and 8 mm, for CT2, CT4, and CT8, respectively) were produced by adjustments made to casting height. Two types of 8 mm thick ODFs produced by single or double casting (4 + 4 mm for CTD4+4) methods were also compared. As film thickness increased, water vapor permeability and tensile strength also increased. Even at equal thickness, manufacturing with double casting exhibited a stronger texture and reduced disintegration compared to single casting. All ODFs met the World Health Organization's recommended daily vitamin C intake (45 mg/day) with a single sheet. Films showed over 80% dissolution in various solvents, adhering to the Hixson-Crowell cube root law, indicating vitamin C release occurred via porous penetration of the eluate. For CT2, CT4, and CTD4+4, vitamin C release was primarily governed by diffusion within the gel matrix and HA erosion. However, for CT8, HA erosion-induced release somewhat dominated. Based on the sensory test, it seems desirable to adjust the thickness of the film to 2 or 4 mm, because a thickness greater than that increased the foreign body sensation due to prolonged residence in the oral cavity.

In silico identification and expression analysis of superoxide dismutases in Tenebrio molitor.

BACKGROUND: Insects encounter various environmental stresses, in response to which they generate reactive oxygen species (ROS). Superoxide dismutase (SOD) is an antioxidant metalloenzyme that scavenges superoxide radicals to prevent oxidative damage. OBJECTIVE: To investigate expressions of SODs under oxidative stress in Tenebrio molitor. METHODS: Here, we investigated the transcriptional expression of SODs by pesticide and heavy metals in Tenebrio moltior. First, we searched an RNA-Seq database for T. molitor SOD (TmSOD) genes and identified two SOD isoforms (TmSOD1-iso1 and iso2). We examined their activities under developmental stage, tissue-specific, and various types (pesticide and heavy metal) of oxidative stress by using qPCR. RESULTS: Our results revealed two novel forms of TmSODs. These TmSODs had a copper/zinc superoxide dismutase domain, active site, Cu2+ binding site, Zn2+ binding site, E-class dimer interface, and P-class dimer interface. TmSODs (TmSOD1-iso1 and iso2) were expressed in diverse developmental phases and tissues. Pesticides and heavy metals caused an upregulation of these TmSODs. CONCLUSION: Our findings suggest that the two TmSODs have different functions in T. molitor, providing insights into the detoxification ability of T. molitor.

Electrochemomechanical failure in layered oxide cathodes caused by rotational stacking faults.

Electrochemomechanical degradation is one of the most common causes of capacity deterioration in high-energy-density cathodes, particularly intercalation-based layered oxides. Here we reveal the presence of rotational stacking faults (RSFs) in layered lithium transition-metal oxides, arising from specific stacking sequences at different angles, and demonstrate their critical role in determining structural/electrochemical stability. Our combined experiments and calculations show that RSFs facilitate oxygen dimerization and transition-metal migration in layered oxides, fostering microcrack nucleation/propagation concurrently with cumulative electrochemomechanical degradation on cycling. We further show that thermal defect annihilation as a potential solution can suppress RSFs, reducing microcracks and enhancing cyclability in lithium-rich layered cathodes. The common but previously overlooked occurrence of RSFs suggests a new synthesis guideline of high-energy-density layered oxide cathodes.

H1N1 nanobody development and therapeutic efficacy verification in H1N1-challenged mice.

Influenza A virus causes numerous deaths and infections worldwide annually. Therefore, we have considered nanobodies as a potential treatment for patients with severe cases of influenza. We developed a nanobody that was expected to have protective efficacy against the A/California/04/2009 (CA/04; pandemic 2009 flu strain) and evaluated its therapeutic efficacy against CA/04 in mice experiments. This nanobody was derived from the immunization of the alpaca, and the inactivated CA/04 virus was used as an immunogen. We successfully generated a nanobody library through bio-panning, phage ELISA, and Bio-layer interferometry. Moreover, we confirmed that administering nanobodies after lethal doses of CA/04 reduced viral replication in the lungs and influenza-induced clinical signs in mice. These research findings will help to develop nanobodies as viral therapeutics for CA/04 and other infectious viruses.

Application of Microbiome-Based Therapies in Chronic Respiratory Diseases.

The application of microbiome-based therapies in various areas of human disease has recently increased. In chronic respiratory disease, microbiome-based clinical applications are considered compelling options due to the limitations of current treatments. The lung microbiome is ecologically dynamic and affected by various conditions, and dysbiosis is associated with disease severity, exacerbation, and phenotype as well as with chronic respiratory disease endotype. However, it is not easy to directly modulate the lung microbiome. Additionally, studies have shown that chronic respiratory diseases can be improved by modulating gut microbiome and administrating metabolites. Although the composition, diversity, and abundance of the microbiome between the gut and lung are considerably different, modulation of the gut microbiome could improve lung dysbiosis. The gut microbiome influences that of the lung via bacterial-derived components and metabolic degradation products, including short-chain fatty acids. This phenomenon might be associated with the cross-talk between the gut microbiome and lung, called gut-lung axis. There are multiple alternatives to modulate the gut microbiome, such as prebiotics, probiotics, and postbiotics ingestion and fecal material transplantation. Several studies have shown that high-fiber diets, for example, present beneficial effects through the production of short-chain fatty acids. Additionally, genetically modified probiotics to secrete some beneficial molecules might also be utilized to treat chronic respiratory diseases. Further studies on microbial modulation to regulate immunity and potentiate conventional pharmacotherapy will improve microbiome modulation techniques, which will develop as a new therapeutic area in chronic respiratory diseases.

Artificial Synapse Based on a δ-FAPbI3/Atomic-Layer-Deposited SnO2 Bilayer Memristor.

Halide perovskite-based resistive switching memory (memristor) has potential in an artificial synapse. However, an abrupt switch behavior observed for a formamidinium lead triiodide (FAPbI3)-based memristor is undesirable for an artificial synapse. Here, we report on the δ-FAPbI3/atomic-layer-deposited (ALD)-SnO2 bilayer memristor for gradual analogue resistive switching. In comparison to a single-layer δ-FAPbI3 memristor, the heterojunction δ-FAPbI3/ALD-SnO2 bilayer effectively reduces the current level in the high-resistance state. The analog resistive switching characteristics of δ-FAPbI3/ALD-SnO2 demonstrate exceptional linearity and potentiation/depression performance, resembling an artificial synapse for neuromorphic computing. The nonlinearity of long-term potentiation and long-term depression is notably decreased from 12.26 to 0.60 and from -8.79 to -3.47, respectively. Moreover, the δ-FAPbI3/ALD-SnO2 bilayer achieves a recognition rate of ≤94.04% based on the modified National Institute of Standards and Technology database (MNIST), establishing its potential in an efficient artificial synapse.

Identifying the Active Sites in MoSi2@MoO3 Heterojunctions for Enhanced Hydrogen Evolution.

Developing Two-dimensional (2D) Mo-based heterogeneous nanomaterials is of great significance for energy conversion, especially in alkaline hydrogen evolution reaction (HER), however, it remains a challenge to identify the active sites at the interface due to the structure complexity. Herein, the real active sites are systematically explored during the HER process in varied Mo-based 2D materials by theoretical computational and magnetron sputtering approaches first to filtrate the candidates, then successfully combined the MoSi2 and MoO3 together through Oxygen doping to construct heterojunctions. Benefiting from the synergistic effects between the MoSi2 and MoO3, the obtained MoSi2@MoO3 exhibits an unprecedented overpotential of 72 mV at a current density of 10 mA cm-2. Density functional theory calculations uncover the different Gibbs free energy of hydrogen adsorption (ΔGH*) values achieved at the interfaces with different sites as adsorption sites. The results can facilitate the optimization of heterojunction electrocatalyst design principles for the Mo-based 2D materials.

Nondestructive Single-Atom-Thick Crystallographic Scanner via Sticky-Note-Like van der Waals Assembling-Disassembling.

Crystallographic characteristics, including grain boundaries and crystallographic orientation of each grain, are crucial in defining the properties of two-dimensional materials (2DMs). To date, local microstructure analysis of 2DMs, which requires destructive and complex processes, is primarily used to identify unknown 2DM specimens, hindering the subsequent use of characterized samples. Here, a nondestructive large-area 2D crystallographic analytical method through sticky-note-like van der Waals (vdW) assembling-disassembling is presented. By the vdW assembling of veiled polycrystalline graphene (PCG) with a single-atom-thick single-crystalline graphene filter (SCG-filter), detailed crystallographic information of each grain in PCGs is visualized through a 2D Raman signal scan, which relies on the interlayer twist angle. The scanned PCGs are seamlessly separated from the SCG-filter using vdW disassembling, preserving their original condition. The remaining SCG-filter is then reused for additional crystallographic scans of other PCGs. It is believed that the methods can pave the way for advances in the crystallographic analysis of single-atom-thick materials, offering huge implications for the applications of 2DMs.

Addition of recombinant human bone morphogenic protein-2 to the graft materials improves the clinical outcomes of implants placed in grafted maxillary sinus.

Background/purpose: The long-term outcomes of implants placed in grafted sinuses using recombinant human bone morphogenetic protein-2 (rhBMP-2) are unclear. This study aimed to compare 3- and 5-year implant survival rates and marginal bone loss (MBL) during functional loading. Materials and methods: In this retrospective study, we analyzed 63 implants inserted after maxillary sinus floor augmentation (MSFA) in 45 patients between January 2016 and April 2019. The outcome variables were: 1) 3- and 5-year cumulative survival rates of the implants and 2) MBL after functional loading. Other assessed variables included patient demographic information, preoperative residual bone height (RBH), surgical site, implant length and diameter, graft material, healing period before loading, prosthetic type, and opposing dentition. Results: The cumulative 3- and 5-year survival rates of the implants were 100% in the rhBMP-2 group and 95.5% and 86.4% in the non-rhBMP-2 group, respectively. The average 3- and 5-year MBL were 1.14 ± 0.67 mm, 1.30 ± 0.74 mm in the rhBMP-2 group and 1.68 ± 0.90 mm, 2.27 ± 1.29 mm in the non-rhBMP-2 group, respectively. Significant differences were observed between 3 and 5 years between the two groups. Conclusion: Addition of the rhBMP-2 to the graft materials positively affects implant placement in the grafted maxillary sinus in terms of implant survival and MBL when preoperative RBH is unfavorable.

Diabetic Neuropathy and Minimum Effective Anesthetic Concentration of Mepivacaine for Axillary Brachial Plexus Block: A Prospective Observational Study.

Nerves in patients with diabetic neuropathy (DN) show increased susceptibility to local anesthetics, potentially requiring a decreased dose. We investigated whether the minimum effective anesthetic concentration (MEAC) of mepivacaine for successful axillary block is lower in patients with DN than in those without. This prospective observational study included patients with DN (n = 22) and without diabetes (n = 22) at a tertiary care center. Patients received an ultrasound-guided axillary block with 30 mL of mepivacaine for anesthesia. The mepivacaine concentration used in each patient was calculated using Dixon's up-and-down method. A block was considered successful if all four sensory nerves had a score of 1 or 2 within 30 min with no pain during surgery. The primary outcome was the MEAC of mepivacaine, and the secondary outcomes included the minimal nerve stimulation intensity for the musculocutaneous nerve and the occurrence of adverse events. The MEAC50 was 0.55% (95% CI 0.33-0.77%) in patients without diabetes and 0.58% (95% CI 0.39-0.77%) in patients with DN (p = 0.837). The MEAC90 was 0.98% (95% CI 0.54-1.42%) in patients without diabetes and 0.96% (95% CI 0.57-1.35%) in patients with DN (p = 0.949). The stimulation threshold for the musculocutaneous nerve was significantly different between groups (0.49 mA vs. 0.19 mA for patients with vs. without diabetes; p = 0.002). In conclusion, the MEAC of mepivacaine for a successful axillary block is not lower in patients with DN.

High-Performance Ferroelectric Thin Film Transistors with Large Memory Window Using Epitaxial Yttrium-Doped Hafnium Zirconium Gate Oxide.

Preventing ferroelectric materials from losing their ferroelectricity over a low thickness of several nanometers is crucial in developing multifunctional nanoelectronics. Epitaxially grown 5 at. % yttrium-doped Hf0.5Zr0.5O2 (YHZO) thin films exhibit an atomically smooth surface, an ability to maintain ferroelectricity even at a thickness of 10 nm, and excellent insulating properties, making them suitable for use as gate oxides in ferroelectric thin film transistors (FeTFTs). Through the epitaxial growth of a YHZO/La0.67Sr0.33MnO3 (LSMO)/SrTiO3 (STO) heterostructure, YHZO effectively retains its ferroelectricity and orthorhombic single phase, leading to enhancing electron mobility (∼19.74 cm2 V-1 s-1) and memory window (3.7 V) in the amorphous InGaZnO4 (a-IGZO)/YHZO/LSMO/STO FeTFTs. These FeTFTs demonstrate a consistent memory function with remarkable endurance (∼106 cycles) and retention (∼104 s). Furthermore, they sustain a constant memory window even under ±6 V bias stress for 104 s and exhibit excellent stability even under ±6 V/1 ms pulse cycling for 107 cycles. For comparison, a transistor with the same structure was fabricated using epitaxial nonferroelectric LaAlO3 (LAO) and epitaxial undoped Hf0.5Zr0.5O2 (HZO) as alternatives to YHZO. This study presents a novel approach to exploit the potential of YHZO in FeTFTs, contributing to the development of next-generation logic-in-memory.

Wearing a back-support exoskeleton alters lower-limb joint kinetics during single-step recovery following a forward loss of balance.

We assessed the effects of a passive, back-support exoskeleton (BSE) on lower-limb joint kinetics during the initiation and swing phases of recovery from a forward loss of balance. Sixteen (8M, 8F) young, healthy participants were released from static forward-leaning postures and attempted to recover their balance with a single-step while wearing a BSE (backXTM) with different levels of support torque and in a control condition. The BSE provided âˆ¼ 15-20 Nm of external hip extension torque on the stepping leg at the end of initiation and beginning of swing phases. Participants were unable to generate sufficient hip flexion torque, power, and work to counteract this external torque, although they sustained hip flexion torque for a more prolonged period, resulting in slightly increased hip contribution to positive leg work (compared to control). However, net positive leg work, and the net contribution of hip joint (human + BSE) to total leg work decreased with BSE use. While all participants had changes in hip joint kinetics, a significant compensatory increase in ankle contribution to positive leg work was observed only among females. Our results suggest that BSE use adversely affects reactive stepping by decreasing the stepping leg kinetic energy for forward propulsion, and that the relative contributions of lower-limb joints to total mechanical work done during balance recovery are altered by BSE use. BSEs may thus need to be implemented with caution for dynamic tasks in occupational settings, as they may impair balance recovery following a forward loss of balance.

Synergistic Effect of Electrical and Biochemical Stimulation on Human iPSC-Derived Neural Differentiation in a Microfluidic Electrode Array Chip.

Neural differentiation is crucial for advancing our understanding of the nervous system and developing treatments for neurological disorders. The advanced methods and the ability to manipulate the alignment, proliferation, and differentiation of stem cells are essential for studying neuronal development and synaptic interactions. However, the utilization of human induced pluripotent stem cells (iPSCs) for disease modeling of neurodegenerative conditions may be constrained by the prolonged duration and uncontrolled cell differentiation required for functional neural cell differentiation. Here, we developed a microfluidic chip to enhance the differentiation and maturation of specific neural lineages by placing aligned microelectrodes on the glass surface to regulate the neural differentiation of human iPSCs. The utilization of electrical stimulation (ES) in conjunction with neurotrophic factors (NF) significantly enhanced the efficiency in generating functional neurons from human iPSCs. We also observed that the simultaneous application of NF and ES to human iPSCs promoted their differentiation and maturation into functional neurons while increasing synaptic interactions. Our research demonstrated the effect of combining NF and ES on human iPSC-derived neural differentiation.

Substantially Accelerated Response and Recovery in Pd-Decorated WO3 Nanorods Gasochromic Hydrogen Sensor.

The development of hydrogen (H2) gas sensors is essential for the safe and efficient adoption of H2 gas as a clean, renewable energy source in the challenges against climate change, given its flammability and associated safety risks. Among various H2 sensors, gasochromic sensors have attracted great interest due to their highly intuitive and low power operation, but slow kinetics, especially slow recovery rate limited its further practical application. This study introduces Pd-decorated amorphous WO3 nanorods (Pd-WO3 NRs) as an innovative gasochromic H2 sensor, demonstrating rapid and highly reversible color changes for H2 detection. In specific, the amorphous nanostructure exhibits notable porosity, enabling rapid detection and recovery by facilitating effective H2 gas interaction and efficient diffusion of hydrogen ions (H+) dissociated from the Pd nanoparticles (Pd NPs). The optimized Pd-WO3 NRs sensor achieves an impressive response time of 14 s and a recovery time of 1 s to 5% H2. The impressively fast recovery time of 1 s is observed under a wide range of H2 concentrations (0.2-5%), making this study a fundamental solution to the challenged slow recovery of gasochromic H2 sensors.

In silico identification and expression analyses of peroxidases in Tenebrio molitor.

Human advancements in agriculture, urbanization, and industrialization have led to various forms of environmental pollution, including heavy metal pollution. Insects, as highly adaptable organisms, can survive under various environmental stresses, which induce oxidative damage and impair antioxidant systems. To investigate the peroxidase (POX) family in Tenebrio molitor, we characterized two POXs, namely TmPOX-iso1 and TmPOX-iso2. The full-length cDNA sequences of TmPox-iso1 and TmPox-iso2 respectively consisted of an open reading frame of 1815 bp encoding 605 amino acids and an open reading frame of 2229 bp encoding 743 amino acids. TmPOX-iso1 and TmPOX-iso2 homologs were found in five distinct insect orders. In the phylogenetic tree analysis, TmPOX-iso1 was clustered with the predicted POX protein of T. castaneum, and TmPOX-iso2 was clustered with the POX precursor protein of T. castaneum. During development, the highest expression level of TmPox-iso1 was observed in the pre-pupal stage, while that of TmPox-iso2 expression were observed in the pre-pupal and 4-day pupal stages. TmPox-iso1 was primarily expressed in the early and late larval gut, while TmPox-iso2 mRNA expression was higher in the fat bodies and Malpighian tubules. In response to cadmium chloride treatment, TmPox-iso1 expression increased at 3 hours and then declined until 24 hours, while in the zinc chloride-treated group, TmPox-iso1 expression peaked 24 hours after the treatment. Both treated groups showed increases in TmPox-iso2 expression 24 hours after the treatments.

Effect of gut microbiota-derived metabolites and extracellular vesicles on neurodegenerative disease in a gut-brain axis chip.

A new perspective suggests that a dynamic bidirectional communication system, often referred to as the microbiome-gut-brain axis, exists among the gut, its microbiome, and the central nervous system (CNS). This system may influence brain health and various brain-related diseases, especially in the realms of neurodevelopmental and neurodegenerative conditions. However, the exact mechanism is not yet understood. Metabolites or extracellular vesicles derived from microbes in the gut have the capacity to traverse the intestinal epithelial barrier or blood-brain barrier, gaining access to the systemic circulation. This phenomenon can initiate the physiological responses that directly or indirectly impact the CNS and its function. However, reliable and controllable tools are required to demonstrate the causal effects of gut microbial-derived substances on neurogenesis and neurodegenerative diseases. The integration of microfluidics enhances scientific research by providing advanced in vitro engineering models. In this study, we investigated the impact of microbe-derived metabolites and exosomes on neurodevelopment and neurodegenerative disorders using human induced pluripotent stem cells (iPSCs)-derived neurons in a gut-brain axis chip. While strain-specific, our findings indicate that both microbial-derived metabolites and exosomes exert the significant effects on neural growth, maturation, and synaptic plasticity. Therefore, our results suggest that metabolites and exosomes derived from microbes hold promise as potential candidates and strategies for addressing neurodevelopmental and neurodegenerative disorders.