Sulfonated graphene oxide-based pervaporation membranes inspired by a tortuous brick and mortar structure for enhanced resilience against silica scaling and organic fouling.

A novel tortuous brick-and-mortar structure utilizing intercalation of polyvinyl alcohol (PVA) on sulfonated graphene oxide (SGO) membranes was specifically tailored for brine treatment by pervaporation to ensure excessive resistance to silica scaling and organic fouling, as well as ultrafast water transport without compromising salt rejection. The synthesized SGO membrane showed a smoother surface morphology, improved zeta potential, and a higher hydration capacity than the graphene oxide (GO) membrane. Further intercalation of PVA through glutaraldehyde (GA) crosslinking, confirmed by Fourier transform infrared spectroscopy and X-ray diffraction analysis, conferred increased cohesiveness, and the SGO-PVA-GA membrane was therefore able to withstand ultrasonication tests without any erosion of the coating layer. According to a pervaporative desalination test, the SGO-PVA-GA membrane exhibited 62 kg m-2 h-1 of permeate flux, with an extraordinary salt rejection of 99.99% for a 10 wt% NaCl feed solution at 65 °C. The 72 h organic fouling, silica scaling, and combined fouling and scaling tests proved that the SGO-PVA-GA membrane sustains a stable flux with less scaling and fouling than the GO-PVA-GA membrane, attributable to dense surface negative charges and great hydration capacities caused by sulfonic acid. Thus, the SGO-PVA-GA membrane offers superlative advantages for long-term brine treatment by pervaporation, related to its ability to withstand silica scaling and organic fouling.

Open Pore Ultrafiltration Hollow Fiber Membrane Fabrication Method via Dual Pore Former with Dual Dope Solution Phase.

Hollow-fiber membranes are widely used in various fields of membrane processes because of their numerous properties, e.g., large surface area, high packing density, mass production with uniform quality, obvious end-of-life indicators, and so on. However, it is difficult to control the pores and internal properties of hollow-fiber membranes due to their inherent structure: a hollow inside surrounded by a wall membrane. Herein, we aimed to control pores and the internal structure of hollow-fiber membranes by fabricating a dual layer using a dual nozzle. Two different pore formers, polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP), were separately prepared in the dope solutions and used for spinning the dual layer. Our results show that nanoscale pores could be formed on the lumen side (26.8-33.2 nm), and the open pores continuously increased in size toward the shell side. Due to robust pore structure, our fabricated membrane exhibited a remarkable water permeability of 296.2 ± 5.7 L/m2·h·bar and an extremely low BSA loss rate of 0.06 ± 0.02%, i.e., a high BSA retention of 99.94%. In consideration of these properties, the studied membranes are well-suited for use in either water treatment or hemodialysis. Overall, our membranes could be considered for the latter application with a high urea clearance of 257.6 mL/min, which is comparable with commercial membranes.