α-Amino Acids as Reducing and Capping Agents in Gold Nanoparticles Synthesis Using the Turkevich Method.

Amino acid-capped gold nanoparticles (AuNPs) are a promising tool for various applications, including therapeutics and diagnostics. Most often, amino acids are used to cap AuNPs synthesized with other reducing agents. However, only a few studies have been dedicated to using α-amino acids as reducing and capping agents in AuNPs synthesis. Hence, there are still several gaps in understanding their role in reducing gold salts. Here, we used 20 proteinogenic α-amino acids and one non-proteinogenic α-amino acid in analogy to sodium citrate as reducing and capping agents in synthesizing AuNPs using the Turkevich method. Only four of the twenty-one investigated amino acids have not yielded gold nanoparticles. The shape, size distribution, stability, and optical properties of synthesized nanoparticles were characterized by scanning electron microscopy, differential centrifugal sedimentation, the phase analysis light scattering technique, and UV-vis spectroscopy. The physicochemical characteristics of synthesized AuNPs varied with the amino acid used for the reduction. We proposed that in the initial stage of gold salts reduction most of the used α-amino acids behave similarly to citrate in the Turkevich method. However, their different physicochemical properties resulting from differences in their chemical structures significantly influence the outcomes of reactions.

SERS performance of GaN/Ag substrates fabricated by Ag coating of GaN platforms.

The results of comparative studies on the fabrication and characterization of GaN/Ag substrates using pulsed laser deposition (PLD) and magnetron sputtering (MS) and their evaluation as potential substrates for surface-enhanced Raman spectroscopy (SERS) are reported. Ag layers of comparable thicknesses were deposited using PLD and MS on nanostructured GaN platforms. All fabricated SERS substrates were examined regarding their optical properties using UV-vis spectroscopy and regarding their morphology using scanning electron microscopy. SERS properties of the fabricated GaN/Ag substrates were evaluated by measuring SERS spectra of 4-mercaptobenzoic acid molecules adsorbed on them. For all PLD-made GaN/Ag substrates, the estimated enhancement factors were higher than for MS-made substrates with a comparable thickness of the Ag layer. In the best case, the PLD-made GaN/Ag substrate exhibited an approximately 4.4 times higher enhancement factor than the best MS-made substrate.

Comparative study of titanium dioxide to improve the quality of finished cosmetic products.

OBJECTIVE: Titanium dioxide (TiO2 ) pigments (pure) or with a hydrophobic coating of triethoxycaprylylsilane (TECSi) used in cosmetics. Using different methods, we studied properties of commercially available pure and coated pigment. We determined the elemental composition of pigments that differ in their behaviour in a cosmetic formulation. The significant differences in the coating composition were revealed. METHODS: UV-Vis absorption spectroscopy allowed us to investigate the pigment purity and determined the polymorph form in pigments. FTIR was employed to identify functional groups present in the samples with the modified surface. XRD, DLS, TEM and DCS were applied to characterize particle size and morphology. The experiment of ED-XRF method was used to determine the elemental composition of pigments that differ in their behaviour in a cosmetic formulation. RESULTS: UV-Vis spectroscopy was used to detect organic pollutants in particular batches, which were not detected in the cases of the tested samples. Solid UV-Vis spectroscopy and XRD revealed which crystalline form of TiO2 is present in pigments. TEM and DLS methods were used to characterize particle size and morphology as well as DCS method, which provide more accurate information about form (separated or clustered particles) of pigments' particles in suspensions. Based on FTIR spectra, the presence of a coating in the raw material was identified, and the tell-tale signal of the silane group. On the contrary, spectroscopy of washed-out product can identify the well or poorly modified pigment. Applying ED-XRF, it turned out that the content of silicon (and consequently of the TECSi) was lower than that declared by the manufacturer. CONCLUSION: Our data indicate how we can recognize poorly coated pigments in raw material. The results show that ED-XRF method is nondestructive, effective and fast, hence, can be successfully introduced into preproduction pigment control in cosmetic industry.

OBJECTIF: Les pigments de dioxyde de titane (TiO2 ) (pur) ou avec un revêtement hydrophobe de triéthoxycaprylylsilane (TECSi) sont utilisés dans les cosmétiques. En utilisant différentes méthodes, nous avons étudié les propriétés des pigments purs et enrobés disponibles dans le commerce. Nous avons déterminé la composition élémentaire des pigments qui diffèrent dans leur comportement dans une formulation cosmétique. Les différences significatives dans la composition de l'enrobage ont été révélées. METHODES: La spectroscopie d'absorption UV-Vis nous a permis d'étudier la pureté des pigments et de déterminer la forme polymorphe des pigments. L'IRTF a été utilisé pour identifier les groupes fonctionnels présents dans les échantillons à la surface modifiée. XRD, DLS, TEM et DCS ont été appliqués pour caractériser la taille et la morphologie des particules. L'expérience de la méthode ED-XRF a été utilisée pour déterminer la composition élémentaire des pigments qui diffèrent dans leur comportement dans une formulation cosmétique. RÉSULTATS: La spectroscopie UV-Vis a été utilisée pour détecter des polluants organiques dans des lots particuliers, qui n'ont pas été détectés dans les cas des échantillons testés. La spectroscopie UV-Vis et la XRD ont révélé quelle forme cristalline de TiO2 est présente dans les pigments. Les méthodes TEM et DLS ont été utilisées pour caractériser la taille et la morphologie des particules ainsi que la méthode DCS qui fournit des informations plus précises sur la forme (particules séparées ou agglomérées) des particules de pigments dans les suspensions. Sur la base des spectres FTIR, la présence d'un revêtement dans la matière première a été identifiée, ainsi que le signal révélateur du groupe silane. D'autre part, la spectroscopie du produit délavé permet d'identifier le pigment bien ou mal modifié. En appliquant l'ED-XRF, il s'est avéré que la teneur en silicium (et par conséquent du TECSi) était inférieure à celle déclarée par le fabricant. CONCLUSION: Nos données indiquent comment nous pouvons reconnaître les pigments mal enrobés dans la matière première. Les résultats montrent que la méthode ED-XRF est non-destructive, efficace et rapide, et qu'elle peut donc être introduite avec succès dans le contrôle des pigments en pré-production dans l'industrie cosmétique.

Investigation of organic monoradicals reactivity using surface-enhanced Raman spectroscopy.

Surface-enhanced Raman spectroscopy (SERS) and self-assembled monolayer (SAM) approaches were used to investigate the reactions of organic monoradicals with methanol. An attempt was made to generate monoradicals from thiophenols and phenylmethanethiols substituted with bromine, iodine, and nitro groups by irradiation with UV light. Monolayers of radical precursors were deposited on SERS substrates, which were then immersed in methanol and irradiated for 1 and/or 3, 6, 12 and 24 h in a UV photochemical reactor. Pre- and postreaction SERS spectra were obtained by using a confocal Raman microscope and compared with the spectra of expected products of the radical reaction with methanol. Our studies have shown that the efficiency of monoradical generation is highly dependent on the chemical structure of the precursor. In addition, it is shown that both the SERS substrate and experimental conditions used strongly influence the obtained results.

Study on the Gas-Phase Reactivity of Charged Pyridynes.

The reactivities of three isomeric, charged ortho-pyridynes, the 1,2-, 2,3-, and 3,4-didehydropyridinium cations, were examined in the gas phase using Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometry. The structures of selected product ions were probed using collision-activated dissociation (CAD) experiments in a linear quadrupole ion trap (LQIT) mass spectrometer. Mechanisms based on quantum chemical calculations are proposed for the formation of all major products. The products of the reactions of the charged ortho-pyridynes in the gas phase were found to closely resemble those formed upon reactions of neutral ortho-arynes in solution, but the mechanisms of these reactions exhibit striking differences. Additionally, no radical reactions were observed for any of the charged ortho-pyridynes examined, in contrast to previous proposals that ortho-benzyne can occasionally react via radical mechanisms. Finally, the relative reactivities of those charged gaseous ortho-pyridynes that yielded similar product distributions were found to be affected mainly by the (calculated) vertical electron affinities of the dehydrocarbon sites, which suggests that the reactivity of these species is controlled by polar effects.

Mechanical and Corrosion Properties of Laser Surface-Treated Ti13Nb13Zr Alloy with MWCNTs Coatings.

Titanium and its alloys is the main group of materials used in prosthetics and implantology. Despite their popularity and many advantages associated with their biocompatibility, these materials have a few significant disadvantages. These include low biologic activity-which reduces the growth of fibrous tissue and allows loosening of the prosthesis-the possibility of metallosis and related inflammation or other allergic reactions, as well as abrasion of the material during operation. Searching for the best combinations of material properties for implants in today's world is not only associated with research on new alloys, but primarily with the modification of their surface layers. The proposed laser modification of the Ti13Nb13Zr alloy with a carbon nanotube coating is aimed at eliminating most of the problems mentioned above. The carbon coating was carried out by electrophoretic deposition (EPD) onto ground and etched substrates. This form of carbon was used due to the confirmed biocompatibility with the human body and the ability to create titanium carbides after laser treatment. The EPD-deposited carbon nanotube coating was subjected to laser treatment. Due to high power densities applied to the material during laser treatment, non-equilibrium structures were observed while improving mechanical and anti-corrosive properties. An electrophoretically deposited coating of carbon nanotubes further improved the effects of laser processing through greater strengthening, hardness or Young's modulus similar to that required, as well as led to an increase in corrosion resistance. The advantage of the presented laser modification of the Ti13Nb13Zr alloy with a carbon coating is the lack of surface cracks, which are difficult to eliminate with traditional laser treatment of Ti alloys. All samples tested showed contact angles between 46° and 82° and thus, based on the literature reports, they have hydrophilic surfaces suitable for cell adhesion.

The Influence of Laser Ablation Parameters on the Holes Structure of Laser Manufactured Graphene Paper Microsieves.

The graphene paper microsieves can be applied in the filtration of biological fluids or separation of solid particles from exploitation fluids. To produce graphene paper microsieves for specific applications, good control over fabrication should be achieved. In this study, a laser ablation method using a picosecond laser was applied to fabricate graphene paper microsieves. Holes in the microsieves were drilled using pulsed laser radiation with a pulse energy from 5 to 100 µJ, a duration of 60 ps, a wavelength of 355 nm, and a repetition rate of 1 kHz. The impact method was applied using 10 to 100 pulses to drill one hole. To produce holes of a proper diameter which could separate biological particles of a certain size (≥10 µm), optimum parameters of graphene paper laser ablation were defined using the MATLAB software taking into account laser pulse energy, repetition rate, and a desired hole diameter. A series of structural tests were carried out to determine the quality of an edge and a hole shape. Experimental results and Laguerre-Gauss calculations in MATLAB were then compared to perform the analysis of the distribution of diffraction fringes. Optimum experimental parameters were determined for which good susceptibility of the graphene paper to laser processing was observed.

Fabrication of Ag-modified hollow titania spheres via controlled silver diffusion in Ag-TiO2 core-shell nanostructures.

Inorganic hollow spheres find a growing number of applications in many fields, including catalysis and solar cells. Hence, a simple fabrication method with a low number of simple steps is desired, which would allow for good control over the structural features and physicochemical properties of titania hollow spheres modified with noble metal nanoparticles. A simple method employing sol-gel coating of nanoparticles with titania followed by controlled silver diffusion was developed and applied for the synthesis of Ag-modified hollow TiO2 spheres. The morphology of the synthesized structures and their chemical composition was investigated using SEM and X-ray photoelectron spectroscopy, respectively. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag-TiO2 hollow nanostructures with different optical properties were prepared simply by a change of the annealing time in the last fabrication step. The synthesized nanostructures exhibit a broadband optical absorption in the UV-vis range.

Fabrication of silver nanoisland films by pulsed laser deposition for surface-enhanced Raman spectroscopy.

The results of studies on the fabrication and characterization of silver nanoisland films (SNIFs) using pulsed laser deposition (PLD) and the evaluation of these films as potential surface-enhanced Raman scattering (SERS) substrates are reported. The SNIFs with thicknesses in a range of 4.7 ± 0.2 nm to 143.2 ± 0.2 nm were deposited under different conditions on silicon substrates. Size and morphology of the fabricated silver nanoislands mainly depend on the substrate temperature, and number and energy of the laser pulses. SERS properties of the fabricated films were evaluated by measuring SERS spectra of para-mercaptoaniline (pMA) molecules adsorbed on them. SERS enhancement factors are shown to depend on the SNIF morphology, which is modified by changes of the deposition conditions. The highest enhancement factor in the range of 105 was achieved for SNIFs that have oval and circular silver nanoislands with small distances between them.

Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates.

Surface-enhanced Raman spectroscopy (SERS) is a very promising analytical technique for the detection and identification of trace amounts of analytes. Among the many substrates used in SERS of great interest are nanostructures fabricated using physical methods, such as semicontinuous metal films obtained via electron beam physical vapor deposition. In these studies, we investigate the influence of morphology of semicontinuous silver films on their SERS properties. The morphologies studied ranged from isolated particles through percolated films to almost continuous films. We found that films below the percolation threshold (transition from dielectric-like to metal-like) made of isolated silver structures provided the largest SERS enhancement of 4-aminothiophenol (4-ATP) analyte signals. The substrate closest to the percolation threshold has the SERS signal about four times lower than the highest signal sample.

Effects of hydrogen bonding on the gas-phase reactivity of didehydroisoquinolinium cation isomers.

Two previously unreported isomeric biradicals with a 1,4-radical topology, the 1,5-didehydroisoquinolinium cation and the 4,8-didehydroisoquinolinium cation, and an additional, previously reported isomer, the 4,5-didehydroisoquinolinium cation, were studied to examine the importance of the exact location of the radical sites on their reactivities in the gas phase. The experimental results suggest that hydrogen bonding in the transition state enhances the reactivity of the 1,5-didehydroisoquinolinium cation towards tetrahydrofuran but not towards allyl iodide, dimethyl disulfide or tert-butyl isocyanide. The observation of no such enhancement of reactivity towards tetrahydrofuran for the 4,8-didehydroisoquinolinium and 4,5-didehydroisoquinolinium cations supports this hypothesis as these two biradicals are not able to engage in hydrogen bonding in their transition states for hydrogen atom abstraction from tetrahydrofuran. Quantum chemical transition state calculations indicate that abstraction of a hydrogen atom from tetrahydrofuran by the 1,5-didehydroisoquinolinium cation occurs at the C-1 radical site and that the transition state is stabilized by hydrogen bonding.

Substituent Effects on the Reactivity of the 2,4,6-Tridehydropyridinium Cation, an Aromatic σ,σ,σ-Triradical.

2,4,6-Tridehydropyridinium cation (7) undergoes three consecutive atom or atom group abstractions from reagent molecules in the gas phase. By placing a π-electron-donating hydroxyl group between two radical sites, their reactivity can be quenched by enhancing their through-space coupling via a favorable resonance structure. Indeed, 3-hydroxy-2,4,6-tridehydropyridinium cation (8) abstracts only one atom or group of atoms from reagents. On the other hand, an electron-withdrawing cyano group between two of the radical sites (9) destabilizes the analogous resonance structure and diminishes through-space coupling between the radical sites, resulting in abstraction of three atoms, just like 7. However, the cyano-substituent also increases acidity to the point that 9 reacts pre-dominantly via proton transfer instead of undergoing radical reactions. Therefore, acidic triradicals may undergo nonradical, barrierless proton transfer reactions faster than radical reactions, which are usually accompanied by barriers. Examination of the analogous cyano-substituted mono-and biradicals revealed behavior similar to that of the corresponding unsubstituted species, with the exception of substantially greater reactivities due to their greater (calculated) vertical electron affinities. Finally, the 3-cyano-2,6-didehydropyridinium cation with a singlet ground state (S-T splitting: -11.9 kcal mol-1) was found to react exclusively from the lowest-energy triplet state by fast proton transfer reactions.

Synthesis and characterization of noble metal-titania core-shell nanostructures with tunable shell thickness.

Core-shell nanostructures have found applications in many fields, including surface enhanced spectroscopy, catalysis and solar cells. Titania-coated noble metal nanoparticles, which combine the surface plasmon resonance properties of the core and the photoactivity of the shell, have great potential for these applications. However, the controllable synthesis of such nanostructures remains a challenge due to the high reactivity of titania precursors. Hence, a simple titania coating method that would allow better control over the shell formation is desired. A sol-gel based titania coating method, which allows control over the shell thickness, was developed and applied to the synthesis of Ag@TiO2 and Au@TiO2 with various shell thicknesses. The morphology of the synthesized structures was investigated using scanning electron microscopy (SEM). Their sizes and shell thicknesses were determined using tunable resistive pulse sensing (TRPS) technique. The optical properties of the synthesized structures were characterized using UV-vis spectroscopy. Ag@TiO2 and Au@TiO2 structures with shell thickness in the range of ≈40-70 nm and 90 nm, for the Ag and Au nanostructures respectively, were prepared using a method we developed and adapted, consisting of a change in the titania precursor concentration. The synthesized nanostructures exhibited significant absorption in the UV-vis range. The TRPS technique was shown to be a very useful tool for the characterization of metal-metal oxide core-shell nanostructures.

A stand-alone compact EUV microscope based on gas-puff target source.

We report on a very compact desk-top transmission extreme ultraviolet (EUV) microscope based on a laser-plasma source with a double stream gas-puff target, capable of acquiring magnified images of objects with a spatial (half-pitch) resolution of sub-50 nm. A multilayer ellipsoidal condenser is used to focus and spectrally narrow the radiation from the plasma, producing a quasi-monochromatic EUV radiation (λ = 13.8 nm) illuminating the object, whereas a Fresnel zone plate objective forms the image. Design details, development, characterization and optimization of the EUV source and the microscope are described and discussed. Test object and other samples were imaged to demonstrate superior resolution compared to visible light microscopy.

Reactivity Controlling Factors for an Aromatic Carbon-Centered σ,σ,σ-Triradical: The 4,5,8-Tridehydroisoquinolinium Ion.

The chemical properties of the 4,5,8-tridehydroisoquinolinium ion (doublet ground state) and related mono- and biradicals were examined in the gas phase in a dual-cell Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometer. The triradical abstracted three hydrogen atoms in a consecutive manner from tetrahydrofuran (THF) and cyclohexane molecules; this demonstrates the presence of three reactive radical sites in this molecule. The high (calculated) electron affinity (EA=6.06 eV) at the radical sites makes the triradical more reactive than two related monoradicals, the 5- and 8-dehydroisoquinolinium ions (EA=4.87 and 5.06 eV, respectively), the reactivity of which is controlled predominantly by polar effects. Calculated triradical stabilization energies predict that the most reactive radical site in the triradical is not position C4, as expected based on the high EA of this radical site, but instead position C5. The latter radical site actually destabilizes the 4,8-biradical moiety, which is singlet coupled. Indeed, experimental reactivity studies show that the radical site at C5 reacts first. This explains why the triradical is not more reactive than the 4-dehydroisoquinolinium ion because the C5 site is the intrinsically least reactive of the three radical sites due to its low EA. Although both EA and spin-spin coupling play major roles in controlling the overall reactivity of the triradical, spin-spin coupling determines the relative reactivity of the three radical sites.

Heterogeneous carbon gels: N-doped carbon xerogels from resorcinol and N-containing heterocyclic aldehydes.

Direct, acid (HCl) initiated sol-gel polycondensation of resorcinol with pyrrole-2-carboxaldehyde or its derivative N-methyl-2-pyrrolecarboxaldehyde yields thermosetting phenolic organic gels with N-content of up to 8.4 wt %. After carbonization, sturdy monoliths of N-doped carbon xerogels with N-content of up to 8 wt % are produced. The morphology and porosity of the doped carbons can be tuned by the solvent composition and the amount of polymerization catalyst used. An increase in carbonization temperature from 600 to 1000 °C strongly affects the carbon gels' microporosity, resulting in a decrease in N2 adsorption capacity, but a significant increase in H2 adsorption capacity (at -196 °C). The growing H2 sorption capacity with the decreasing specific surface area (measured by N2) is related to the gradual shrinkage of the carbon xerogel matrix and narrowing of the small micropores. In addition, it is demonstrated that pyridine-based heterocyclic aldehydes, that is, 2- or 4-pyridinecarboxaldehyde, condensate with resorcinol in basic conditions (KOH, NH4OH). However, in this case, monoliths cannot be produced and powders/rigid solid precipitates are obtained instead. If NH4OH is used as a sol-gel polycondensation catalyst, N-doped foams are obtained as a final carbonaceous product.

Experimental and computational studies on the formation of three para-benzyne analogues in the gas phase.

Experimental and computational studies on the formation of three gaseous, positively-charged para-benzyne analogues in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer are reported. The structures of the cations were examined by isolating them and allowing them to react with various neutral reagents whose reactions with aromatic carbon-centered σ-type mono- and biradicals are well understood. Cleavage of two iodine-carbon bonds in N-deuterated 1,4-diiodoisoquinolinium cation by collision-activated dissociation (CAD) produced a long-lived cation that showed nonradical reactivity, which was unexpected for a para-benzyne. However, the reactivity closely resembles that of an isomeric enediyne, N-deuterated 2-ethynylbenzonitrilium cation. A theoretical study on possible rearrangement reactions occurring during CAD revealed that the cation formed upon the first iodine atom loss undergoes ring-opening before the second iodine atom loss to form an enediyne instead of a para-benzyne. Similar results were obtained for the 5,8-didehydroisoquinolinium cation and the 2,5-didehydropyridinium cation. The findings for the 5,8-didehydroisoquinolinium cation are in contradiction with an earlier report on this cation. The cation described in the literature was regenerated by using the literature method and demonstrated to be the isomeric 5,7-didehydro-isoquinolinium cation and not the expected 5,8-isomer.

Does the 2,6-didehydropyridinium cation exist?

Reactive intermediates are key species involved in many chemical and biochemical processes. For example, carbon-centered aromatic σ,σ-biradicals formed in biological systems from naturally occurring enediyne antitumor antibiotics are responsible for the irreversible cleavage of double-stranded DNA caused by these prodrugs. However, because of their high reactivity, it is very difficult or impossible to isolate and investigate these biradicals. The aromatic σ,σ-biradical, 2,6-didehydropyridine, has been speculated for many years to be formed in certain organic reactions; however, no definitive proof of its generation has been obtained. We report here the successful generation of protonated 2,6-didehydropyridine and the examination of its chemical properties in the gas phase by using a Fourier transform ion cyclotron resonance mass spectrometer. The results suggest that a mixture of singlet (ground) state and triplet (excited) state 2,6-didehydropyridinium cations was generated. The two different states show qualitatively different reactivity, with the triplet state showing greater Brønsted acidity than that of the singlet state. The triplet state also shows much greater radical reactivity than that of the singlet state, as expected because of the coupling of the nonbonding electrons in the singlet state.

Reactivity of the 4,5-didehydroisoquinolinium cation.

The chemical properties of a 1,8-didehydronaphthalene derivative, the 4,5-didehydroisoquinolinium cation, were examined in the gas phase in a dual-cell Fourier-transform ion cyclotron resonance (FT-ICR) mass spectrometer. This is an interesting biradical because it has two radical sites in close proximity, yet their coupling is very weak. In fact, the biradical is calculated to have approximately degenerate singlet and triplet states. This biradical was found to exclusively undergo radical reactions, as opposed to other related biradicals with nearby radical sites. The first bond formation occurs at the radical site in the 4-position, followed by that in the 5-position. The proximity of the radical sites leads to reactions that have not been observed for related mono- or biradicals. Interestingly, some ortho-benzynes have been found to yield similar products. Since ortho-benzynes do not react via radical mechanisms, these products must be especially favorable thermodynamically.