Integrated Experimental and Theoretical Investigation of Copper Active Site Properties of a Lytic Polysaccharide Monooxygenase from Serratia marcescens.

In this paper, we employed a multidisciplinary approach, combining experimental techniques and density functional theory (DFT) calculations to elucidate key features of the copper coordination environment of the bacterial lytic polysaccharide monooxygenase (LPMO) from Serratia marcescens (SmAA10). The structure of the holo-enzyme was successfully obtained by X-ray crystallography. We then determined the copper(II) binding affinity using competing ligands and observed that the affinity of the histidine brace ligands for copper is significantly higher than previously described. UV-vis, advanced electron paramagnetic resonance (EPR), and X-ray absorption spectroscopy (XAS) techniques, including high-energy resolution fluorescence detected (HERFD) XAS, were further used to gain insight into the copper environment in both the Cu(II) and Cu(I) redox states. The experimental data were successfully rationalized by DFT models, offering valuable information on the electronic structure and coordination geometry of the copper center. Finally, the Cu(II)/Cu(I) redox potential was determined using two different methods at ca. 350 mV vs NHE and rationalized by DFT calculations. This integrated approach not only advances our knowledge of the active site properties of SmAA10 but also establishes a robust framework for future studies of similar enzymatic systems.

In Solution Identification of the Lysine-Cysteine Redox Switch with a NOS Bridge in Transaldolase by Sulfur K-Edge X-ray Absorption Spectroscopy.

A novel covalent post-translational modification (lysine-NOS-cysteine) was discovered in proteins, initially in the enzyme transaldolase of Neisseria gonorrhoeae (NgTAL) [Nature 2021, 593, 460-464], acting as a redox switch. The identification of this novel linkage in solution was unprecedented until now. We present detection of the NOS redox switch in solution using sulfur K-edge X-ray absorption spectroscopy (XAS). The oxidized NgTAL spectrum shows a distinct shoulder on the low-energy side of the rising edge, corresponding to a dipole-allowed transition from the sulfur 1s core to the unoccupied σ* orbital of the S-O group in the NOS bridge. This feature is absent in the XAS spectrum of reduced NgTAL, where Lys-NOS-Cys is absent. Our experimental and calculated XAS data support the presence of a NOS bridge in solution, thus potentially facilitating future studies on enzyme activity regulation mediated by the NOS redox switches, drug discovery, biocatalytic applications, and protein design.

Chemical and Redox Noninnocence of Pentane-2,4-dione Bis(S-methylisothiosemicarbazone) in Cobalt Complexes and Their Application in Wacker-Type Oxidation.

Cobalt complexes with multiproton- and multielectron-responsive ligands are of interest for challenging catalytic transformations. The chemical and redox noninnocence of pentane-2,4-dione bis(S-methylisothiosemicarbazone) (PBIT) in a series of cobalt complexes has been studied by a range of methods, including spectroscopy [UV-vis, NMR, electron paramagnetic resonance (EPR), X-ray absorption spectroscopy (XAS)], cyclic voltammetry, X-ray diffraction, and density functional theory (DFT) calculations. Two complexes [CoIII(H2LSMe)I]I and [CoIII(LSMe)I2] were found to act as precatalysts in a Wacker-type oxidation of olefins using phenylsilane, the role of which was elucidated through isotopic labeling. Insights into the mechanism of the catalytic transformation as well as the substrate scope of this selective reaction are described, and the essential role of phenylsilane and the noninnocence of PBIT are disclosed. Among the several relevant species characterized was an unprecedented Co(III) complex with a dianionic diradical PBIT ligand ([CoIII(LSMe••)I]).

The synthesis and characterization of an iron(VII) nitrido complex.

Complexes of iron in high oxidation states are captivating research subjects due to their pivotal role as active intermediates in numerous catalytic processes. Structural and spectroscopic studies of well-defined model complexes often provide evidence of these intermediates. In addition to the fundamental molecular and electronic structure insights gained by these complexes, their reactivity also affects our understanding of catalytic reaction mechanisms for small molecule and bond-activation chemistry. Here, we report the synthesis, structural and spectroscopic characterization of a stable, octahedral Fe(VI) nitrido complex and an authenticated, unique Fe(VII) species, prepared by one-electron oxidation. The super-oxidized Fe(VII) nitride rearranges to an Fe(V) imide through an intramolecular amination mechanism and ligand exchange, which is characterized spectroscopically and computationally. This enables combined reactivity and stability studies on a single molecular system of a rare high-valent complex redox pair. Quantum chemical calculations complement the spectroscopic parameters and provide evidence for a diamagnetic (S = 0) d 2 Fe(VI) and a genuine S = 1/2, d 1 Fe(VII) configuration of these super-oxidized nitrido complexes.

A Conserved Second Sphere Residue Tunes Copper Site Reactivity in Lytic Polysaccharide Monooxygenases.

Lytic polysaccharide monooxygenases (LPMOs) are powerful monocopper enzymes that can activate strong C-H bonds through a mechanism that remains largely unknown. Herein, we investigated the role of a conserved glutamine/glutamate in the second coordination sphere. Mutation of the Gln in NcAA9C to Glu, Asp, or Asn showed that the nature and distance of the headgroup to the copper fine-tune LPMO functionality and copper reactivity. The presence of Glu or Asp close to the copper lowered the reduction potential and decreased the ratio between the reduction and reoxidation rates by up to 500-fold. All mutants showed increased enzyme inactivation, likely due to changes in the confinement of radical intermediates, and displayed changes in a protective hole-hopping pathway. Electron paramagnetic resonance (EPR) and X-ray absorption spectroscopic (XAS) studies gave virtually identical results for all NcAA9C variants, showing that the mutations do not directly perturb the Cu(II) ligand field. DFT calculations indicated that the higher experimental reoxidation rate observed for the Glu mutant could be reconciled if this residue is protonated. Further, for the glutamic acid form, we identified a Cu(III)-hydroxide species formed in a single step on the H2O2 splitting path. This is in contrast to the Cu(II)-hydroxide and hydroxyl intermediates, which are predicted for the WT and the unprotonated glutamate variant. These results show that this second sphere residue is a crucial determinant of the catalytic functioning of the copper-binding histidine brace and provide insights that may help in understanding LPMOs and LPMO-inspired synthetic catalysts.

Synthesis and Reactivity of a Cobalt-Supported Singlet Nitrene.

The synthesis, characterization, and reactivity of a series of cobalt terminal imido complexes supported by an N-anchored tripodal tris(carbene) chelate is described, including a Co-supported singlet nitrene. Reaction of the CoI precursor [(TIMMNmes)CoI](PF6) (TIMMNmes = tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with p-methoxyphenyl azide yields a CoIII imide [(TIMMNmes)CoIII(NAnisole)](PF6) (1). Treatment of 1 with 1 equiv of [FeCp2](PF6) at -35 °C affords a formal CoIV imido complex [(TIMMNmes)Co(NAnisole)](PF6)2 (2), which features a bent Co-N(imido)-C(Anisole) linkage. Subsequent one-electron oxidation of 2 with 1 equiv of AgPF6 provides access to the tricationic cobalt imido complex [(TIMMNmes)Co(NAnisole)](PF6)3 (3). All complexes were fully characterized, including single-crystal X-ray diffraction (SC-XRD) analyses, infrared (IR) vibrational, ultraviolet/visible (UV/vis) electronic absorption, multinuclear NMR, X-band electron paramagnetic resonance (EPR), electron nuclear double resonance (ENDOR), and high-energy-resolution fluorescence-detected X-ray absorption spectroscopy (HERFD XAS). Quantum chemical calculations provide additional insight into the electronic structures of all compounds. The dicationic CoIV imido complex 2 exhibits a doublet ground state with considerable imidyl character as a result of covalent Co-NAnisole bonding. At room temperature, 2 readily converts to a CoII amine complex involving intramolecular C-H bond amination. Electronically, tricationic complex 3 can be understood as a singlet nitrene bound to CoIII with significant CoIV imidyl radical character. Verifying the pronounced electrophilicity, nucleophiles such as H2O and tBuNH2 add to 3─analogous to the parent free nitrene─in the para position of the aromatic substituent, thus, clearly corroborating singlet nitrene-type reactivity.

From Divalent to Pentavalent Iron Imido Complexes and an Fe(V) Nitride via N-C Bond Cleavage.

As key intermediates in metal-catalyzed nitrogen-transfer chemistry, terminal imido complexes of iron have attracted significant attention for a long time. In search of versatile model compounds, the recently developed second-generation N-anchored tris-NHC chelating ligand tris-[2-(3-mesityl-imidazole-2-ylidene)-methyl]amine (TIMMNMes) was utilized to synthesize and compare two series of mid- to high-valent iron alkyl imido complexes, including a reactive Fe(V) adamantyl imido intermediate en route to an isolable Fe(V) nitrido complex. The chemistry toward the iron adamantyl imides was achieved by reacting the Fe(I) precursor [(TIMMNMes)FeI(N2)]+ (1) with 1-adamantyl azide to yield the corresponding trivalent iron imide. Stepwise chemical reduction and oxidation lead to the isostructural series of low-spin [(TIMMNMes)Fe(NAd)]0,1+,2+,3+ (2Ad-5Ad) in oxidation states II to V. The Fe(V) imide [(TIMMNMes)Fe(NAd)]3+ (5Ad) is unstable under ambient conditions and converts to the air-stable nitride [(TIMMNMes)FeV(N)]2+ (6) via N-C bond cleavage. The stability of the pentavalent imide can be increased by derivatizing the nitride [(TIMMNMes)FeIV(N)]+ (7) with an ethyl group using the triethyloxonium salt Et3OPF6. This gives access to the analogous series of ethyl imides [(TIMMNMes)Fe(NEt)]0,1+,2+,3+ (2Et-5Et), including the stable Fe(V) ethyl imide. Iron imido complexes exist in a manifold of different electronic structures, ultimately controlling their diverse reactivities. Accordingly, these complexes were characterized by single-crystal X-ray diffraction analyses, SQUID magnetization, and electrochemical methods, as well as 57Fe Mössbauer, IR vibrational, UV/vis electronic absorption, multinuclear NMR, X-band EPR, and X-ray absorption spectroscopy. Our studies are complemented with quantum chemical calculations, thus providing further insight into the electronic structures of all complexes.

Umpolung in a Pair of Cobalt(III) Terminal Imido/Imidyl Complexes.

Reaction of the CoI complex [(TIMMNmes )CoI ](PF6 ) (1) (TIMMNmes =tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with mesityl azide yields the CoIII imide [(TIMMNmes )CoIII (NMes)](PF6 ) (2). Oxidation of 2 with [FeCp2 ](PF6 ) provides access to a rare CoIII imidyl [(TIMMNmes )Co(NMes)](PF6 )2 (3). Single-crystal X-ray diffractometry and EPR spectroscopy confirm the molecular structure of 3 and its S= 1 / 2 ground state. ENDOR, X-ray absorption spectroscopy and computational analyses indicate a ligand-based oxidation; thus, an imidyl-radical electronic structure for 3. Migratory insertion of one ancillary NHC to the imido ligand in 2 gives the CoI N-heterocyclic imine (4) within 12 h. Conversely, it takes merely 0.5 h for 3 to transform to the CoII congener (5). The migratory insertion in 2 occurs via a nucleophilic attack of the imido ligand at the NHC to give 4, whereas in 3, a nucleophilic attack of the NHC at the electrophilic imidyl ligand yields 5. The reactivity shunt upon oxidation of 2 to 3 confirms an umpolung of the imido ligand.

Synthesis of FeIII and FeIV Cyanide Complexes Using Hypervalent Iodine Reagents as Cyano-Transfer One-Electron Oxidants.

We disclose a new reactivity mode for electrophilic cyano λ3 -iodanes as group transfer one-electron oxidants to synthesize FeIII and FeIV cyanide complexes. The inherent thermal instability of high-valent FeIV compounds without π-donor ligands (such as oxido (O2- ), imido (RN2- ) or nitrido (N3- )) makes their isolation and structural characterization a very challenging task. We report the synthesis of an FeIV cyanide complex [(N3 N')FeCN] (4) by two consecutive single electron transfer (SET) processes from FeII precursor [(N3 N')FeLi(THF)] (1) with cyanobenziodoxolone (CBX). The FeIV complex can also be prepared by reaction of [(N3 N')FeIII ] (3) with CBX. In contrast, the oxidation of FeII with 1-cyano-3,3-dimethyl-3-(1H)-1,2-benziodoxole (CDBX) enables the preparation of FeIII cyanide complex [(N3 N')FeIII (CN)(Li)(THF)3 ] (2-LiTHF ). Complexes 4 and 2-LiTHF have been structurally characterized by single crystal X-ray diffraction and their electronic structure has been examined by Mössbauer, EPR spectroscopy, and computational analyses.

Electrostatic contributions in the increased compatibility of polymer blends.

Successful blending of different polymers to make a structural or functional material requires overcoming limitations due to immiscibility and/or incompatibility that arise from large polymer-polymer interfacial tensions. In the case of latex blends, the combination of capillary adhesion during the blended dispersion drying stage with electrostatic adhesion in the final product is an effective strategy to avoid these limitations, which has been extended to a number of polymer blends and composites. This work shows that adhesion of polymer domains in blends made with natural rubber and synthetic latexes is enhanced by electrostatic adhesion that is in turn enhanced by ion migration, according to the results from scanning electric potential microscopy. The additional attractive force between domains improves blend stability and mechanical properties, broadening the possibilities and scope of latex blends, in consonance with the "green chemistry" paradigm. This novel approach based on electrostatic adhesion can be easily extended to multicomponent systems, including nonpolymers.

Chemically induced folding of single and bilayer graphene.

Here we report chemically induced folding of thin graphene flakes. The folding occurs spontaneously when an intercalating species interrupts the adhesion between graphene and a supporting substrate. The morphology of induced folds suggests that the conjugated pi network is capable of extremely sharp curvature. Adjacent folds are often parallel, suggesting preferential deformation along certain crystallographic planes.