Performant removal of creatinine using few-layer-graphene/alginate beads as a kidney filter.

Reduction of renal function, such as creatinine adsorption is one of the most common and dangerous diseases. Dedicated to this issue, developing high-performance, sustainable, and bio-compatible adsorbing materials is still challenging. Herein, barium alginate (BA) and BA containing few-layer graphene (FLG/BA) beads were synthesized in water from sodium alginate, also acting as bio-surfactant in in-situ exfoliation of graphite to FLG. The physicochemical characteristics of the beads demonstrated an excess of barium chloride used as a cross-linker. The efficiency and sorption capacity (Qe) of creatinine removal increase with processing duration reaching 82.1, 99.5 %, and 68.4, 82.9 mg·g-1 for BA and FLG/BA, respectively. The thermodynamic parameters detect the enthalpy change (ΔH°) of about -24.29 and -36.11 kJ·mol-1 and the entropy change (ΔS°) of around -69.24 and -79.46 J·mol-1 K-1 for BA and FLG/BA, respectively. During the reusability test, the removal efficiency decreases from the optimal first cycle to 69.1 and to 88.3 % in the sixth cycle for BA and FLG/BA, revealing superior stability of FLG/BA. The MD calculations confirm a higher adsorption capacity of FLG/BA composite compared to BA alone, clearly confirming a strong structure-property relation.

Chitosan based-nanoparticles and nanocapsules: Overview, physicochemical features, applications of a nanofibrous scaffold, and bioprinting.

Recent advancements in the synthesis, properties, and applications of chitosan as the second after cellulose available biopolymer in nature were discussed in this review. A general overview of processing and production procedures from A to Z was highlighted. Chitosan exists in three polymorphic forms which differ in degree of crystallinity (α, ß, and γ). Thus, the degree of deacetylation, crystallinity, surface area, and molecular mass significantly affect most applications. Otherwise, the synthesis of chitosan nanofibers is suffering from many drawbacks that were recently treated by co-electrospun with other polymers such as polyvinyl alcohol (PVA), polyethylene oxide (PEO), and polycaprolactone (PCL). Ultimately, this review focuses on the area of new trend utilization of chitosan nanoparticles as nanospheres and nanocapsules, in cartilage and bone regenerative medicine. Owing to its biocompatibility, bioavailability, biodegradability, and costless synthesis, chitosan is a promising biopolymeric structure for water remediation, drug delivery, antimicrobials, and tissue engineering.

Comparing Multi-Walled Carbon Nanotubes and Halloysite Nanotubes as Reinforcements in EVA Nanocomposites.

The influence of carbon multi-walled nanotubes (MWCNTs) and halloysite nanotubes (HNTs) on the physical, thermal, mechanical, and electrical properties of EVA (ethylene vinyl acetate) copolymer was investigated. EVA-based nanocomposites containing MWCNTs or HNTs, as well as hybrid nanocomposites containing both nanofillers were prepared by melt blending. Scanning electron microcopy (SEM) images revealed the presence of good dispersion of both kinds of nanotubes throughout the EVA matrix. The incorporation of nanotubes into the EVA copolymer matrix did not significantly affect the crystallization behavior of the polymer. The tensile strength of EVA-based nanocomposites increased along with the increasing CNTs (carbon nanotubes) content (increased up to approximately 40% at the loading of 8 wt.%). In turn, HNTs increased to a great extent the strain at break. Mechanical cyclic tensile tests demonstrated that nanocomposites with hybrid reinforcement exhibit interesting strengthening behavior. The synergistic effect of hybrid nanofillers on the modulus at 100% and 200% elongation was visible. Moreover, along with the increase of MWCNTs content in EVA/CNTs nanocomposites, an enhancement in electrical conductivity was observed.

Polyvinyl Alcohol-Few Layer Graphene Composite Films Prepared from Aqueous Colloids. Investigations of Mechanical, Conductive and Gas Barrier Properties.

Quasi all water soluble composites use graphene oxide (GO) or reduced graphene oxide (rGO) as graphene based additives despite the long and harsh conditions required for their preparation. Herein, polyvinyl alcohol (PVA) films containing few layer graphene (FLG) are prepared by the co-mixing of aqueous colloids and casting, where the FLG colloid is first obtained via an efficient, rapid, simple, and bio-compatible exfoliation method providing access to relatively large FLG flakes. The enhanced mechanical, electrical conductivity, and O2 barrier properties of the films are investigated and discussed together with the structure of the films. In four different series of the composites, the best Young's modulus is measured for the films containing around 1% of FLG. The most significant enhancement is obtained for the series with the largest FLG sheets contrary to the elongation at break which is well improved for the series with the lowest FLG sheets. Relatively high one-side electrical conductivity and low percolation threshold are achieved when compared to GO/rGO composites (almost 10-3 S/cm for 3% of FLG and transport at 0.5% FLG), while the conductivity is affected by the formation of a macroscopic branched FLG network. The composites demonstrate a reduction of O2 transmission rate up to 60%.

Colloid Approach to the Sustainable Top-Down Synthesis of Layered Materials.

The successful future of 2D materials, which are crucial for accelerating technology development and societal requirements, depends on their efficient preparation in an economical and ecological way. Herein, we present a significant advance in the top-down exfoliation and dispersion method via an aqua colloid approach. We demonstrate that a broad family of natural oil-in-water emulsification agents with an elevated hydrophilic/lipophilic balance acts in the exfoliation of layered materials and the formation of their concentrated colloids. The concentration exceeds 45 g/L for exfoliated few-layered graphene sheets possessing a micrometer size. The exfoliation of carbon nanofibers provides one of the best known unsupported and N-undoped metal-free catalysts to date in the selective dehydrogenation of ethylbenzene to styrene. Other examples include aqua colloids of exfoliated/dispersed nitrides, carbides, or nanodiamonds.

A highly N-doped carbon phase "dressing" of macroscopic supports for catalytic applications.

The straightforward "dressing" of macroscopically shaped supports (i.e.ß-SiC and α-Al2O3) with a mesoporous and highly nitrogen-doped carbon-phase starting from food-processing raw materials is described. The as-prepared composites serve as highly efficient and selective metal-free catalysts for promoting industrial key-processes at the heart of renewable energy technology and environmental protection.

Activation of few layer graphene by µW-assisted oxidation in water via formation of nanoballs - Support for platinum nanoparticles.

The functionalization of carbon nanomaterials in controlled and selective manner and in order to stabilize small metal nanoparticles is of high interest particularly in the catalysis field. We present the µ-waves assisted few layer graphene (FLG) oxidation in water, which results in a partial sheets exfoliation and formation of oxygen functionalized carbon nanoballs, supported on highly graphitized graphene sheets. This double morphology material allows homogenous anchoring of Pt nanoparticles, while the advantages of planar and highly crystallized FLG are preserved. For comparison, acid treated FLG (conventional heating) exhibits highly hydrophobic and inert surface with carboxylic groups as anchoring sides localized at the FLG edges. Despite similar oxygen content, the performed physicochemical analyses depict different nature and localization of the oxygen/defects functionalities introduced in water (in µ-waves) and acid treated FLGs. Finally, the addition of FLG during the preparation of Pt particles-carried out by µ-wave assisted polyol method yields small nanoparticles with average size of 1nm.

Hybrid Films of Graphene and Carbon Nanotubes for High Performance Chemical and Temperature Sensing Applications.

A hybrid composite material of graphene and carbon nanotube (CNT) for high performance chemical and temperature sensors is reported. Integration of 1D and 2D carbon materials into hybrid carbon composites is achieved by coupling graphene and CNT through poly(ionic liquid) (PIL) mediated-hybridization. The resulting CNT/PIL/graphene hybrid materials are explored as active materials in chemical and temperature sensors. For chemical sensing application, the hybrid composite is integrated into a chemo-resistive sensor to detect a general class of volatile organic compounds. Compared with the graphene-only devices, the hybrid film device showed an improved performance with high sensitivity at ppm level, low detection limit, and fast signal response/recovery. To further demonstrate the potential of the hybrid films, a temperature sensor is fabricated. The CNT/PIL/graphene hybrid materials are highly responsive to small temperature gradient with fast response, high sensitivity, and stability, which may offer a new platform for the thermoelectric temperature sensors.

Effect of nitriding/nanostructuration of few layer graphene supported iron-based particles; catalyst in graphene etching and carbon nanofilament growth.

Stable, highly faceted and dispersed iron nitride particles supported on few layer graphene are obtained by ammonia decomposition on iron-based particles at the temperature commonly used for the synthesis of N-doped CNTs and graphene etching. The TEM/EELS analysis reveals nitrogen diffusion in a bulk of the particles. The resulting facet FeNx catalyst exhibits high activity in the etching of graphene, which is assisted by catalyst reorganization. Ammonia decomposition is used for the first time for graphene etching, while the highly faceted catalyst has an impact on the etched channels structures. According to the shape of the active planes of the catalyst, the etching results in sharp "V" channel ends and often "step-like" edges. The FeNx morphology proves previously reported triangularisation of arches in highly N-doped carbon nanotubes. The conditioning of the catalyst by its shaping and nitrogen incorporation is investigated additionally in the carbon nanostructure formation, for decomposition of ethane. The herringbone CNFs, "hollow" bamboo-like CNFs/CNTs or CNTs are effectively observed.

A single-stage functionalization and exfoliation method for the production of graphene in water: stepwise construction of 2D-nanostructured composites with iron oxide nanoparticles.

A practically simple top-down process for the exfoliation of graphene (GN) and few-layer graphene (FLG) from graphite is described. We have discovered that a biocompatible amphiphilic pyrene-based hexahistidine peptide is able to exfoliate, functionalize, and dissolve few layer graphene flakes in pure water under exceptionally mild, sustainable and virtually innocuous low intensity cavitation conditions. Large area functionalized graphene flakes with the hexahistidine oligopeptide (His6-TagGN = His6@GN) have been produced efficiently at room temperature and characterized by TEM, Raman, and UV spectroscopy. Conductivity experiments carried out on His6-TagGN samples revealed superior electric performances as compared to reduced graphene oxide (rGO) and non-functionalized graphene, demonstrating the non-invasive features of our non-covalent functionalization process. We postulated a rational exfoliation mechanism based on the intercalation of the peptide amphiphile under cavitational chemistry. We also demonstrated the ability of His6-TagGN nanoassemblies to self-assemble spontaneously with inorganic iron oxide nanoparticles generating magnetic two-dimensional (2D) His6-TagGN/Fe3O4 nanocomposites under mild and non-hydrothermal conditions. The set of original experiments described here open novel perspectives in the facile production of water dispersible high quality GN and FLG sheets that will improve and facilitate the interfacing, processing and manipulation of graphene for promising applications in catalysis, nanocomposite construction, integrated nanoelectronic devices and bionanotechnology.

Electrical transport measured in atomic carbon chains.

The first electrical-transport measurements of monatomic carbon chains are reported in this study. The chains were obtained by unraveling carbon atoms from graphene ribbons while an electrical current flowed through the ribbon and, successively, through the chain. The formation of the chains was accompanied by a characteristic drop in the electrical conductivity. The conductivity of the chains was much lower than previously predicted for ideal chains. First-principles calculations using both density functional and many-body perturbation theory show that strain in the chains has an increasing effect on the conductivity as the length of the chains increases. Indeed, carbon chains are always under varying nonzero strain that transforms their atomic structure from the cumulene to the polyyne configuration, thus inducing a tunable band gap. The modified electronic structure and the characteristics of the contact to the graphitic periphery explain the low conductivity of the locally constrained carbon chain.

3D analysis of the morphology and spatial distribution of nitrogen in nitrogen-doped carbon nanotubes by energy-filtered transmission electron microscopy tomography.

We present here the application of the energy-filtered transmission electron microscopy (EFTEM) in the tomographic mode to determine the precise 3D distribution of nitrogen within nitrogen-doped carbon nanotubes (N-CNTs). Several tilt series of energy-filtered images were acquired on the K ionization edges of carbon and nitrogen on a multiwalled N-CNT containing a high amount of nitrogen. Two tilt series of carbon and nitrogen 2D maps were then calculated from the corresponding energy-filtered images by using a proper extraction procedure of the chemical signals. Applying iterative reconstruction algorithms provided two spatially correlated C and N elemental-selective volumes, which were then simultaneously analyzed with the shape-sensitive reconstruction deduced from Zero-Loss recordings. With respect to the previous findings, crucial information obtained by analyzing the 3D chemical maps was that, among the two different kind of arches formed in these nanotubes (transversal or rounded ones depending on their morphology), the transversal arches contain more nitrogen than do the round ones. In addition, a detailed analysis of the shape-sensitive volume allowed the observation of an unexpected change in morphology along the tube axis: close to the round arches (with less N), the tube is roughly cylindrical, whereas near the transversal ones (with more N), its shape changes to a prism. This relatively new technique is very powerful in the material science because it combines the ability of the classical electron tomography to solve 3D structures and the chemical selectivity of the EFTEM imaging.

Synthesis of transparent vertically aligned TiO2 nanotubes on a few-layer graphene (FLG) film.

Novel transparent 1D-TiO(2)/few-layer graphene electrodes are realised by the anodic growth of vertically aligned TiO(2) nano-tubes on a few-layer graphene film coated on a glass substrate.

Nitrogen-doped carbon nanotubes as a highly active metal-free catalyst for selective oxidation.

Catalytic reactions are generally carried out on supported metals or oxides, which act as an active phase and require impregnation and thermal treatment steps. During tests, the metal or oxide nanoparticles could be further sintered, which would induces deactivation. Direct incorporation of the active phase into the matrix of a support could be an elegant alternative to prevent catalyst deactivation. Here, we report that nitrogen-doped carbon nanotubes (N-CNTs) can be efficiently employed as a metal-free catalyst for oxidative reactions that allow the selective transformation of the harmful, gaseous H(2)S into solid sulfur. The catalyst exhibits a high stability during the test at high space velocity. The macroscopic shaping of the catalyst on the silicon carbide foam also increases its catalytic activity by improving the contact between the reactants and the catalyst. Such macroscopic shaping allows the avoidance of problems linked with transport and handling of nanoscopic materials and also reduces the pressure drop across the catalyst bed to a large extent.

Catalytic action of gold and copper crystals in the growth of carbon nanotubes.

Multi-wall carbon nanotubes are grown in a chemical vapor deposition process by using bulk gold and copper substrates as catalysts. Nanotube growth starts from a nanometer-sized roughness on the metal surfaces and occurs in a mechanism where the catalyst particle is either at the tip (Au) or root (Cu) of the growing nanotube. Whereas Au leads to nanotubes with good structural perfection, nanotubes grown from Cu show a higher density of defects. High-resolution transmission electron microscopy shows the bonding between Au and carbon at the metal-nanotube interface whereas no bonds between Cu and carbon occur. Highly mobile Au or Cu atoms adsorb at the growing edge of a carbon nanotube from where diffusion along the nanotube wall can lead to the formation of Au or Cu nanowires inside the central hollow of carbon nanotubes.

Analytical electron tomography mapping of the SiC pore oxidation at the nanoscale.

Silicon carbide is a ceramic material that has been widely studied because of its potential applications, ranging from electronics to heterogeneous catalysis. Recently, a new type of SiC materials with a medium specific surface area and thermal conductivity, called ß-SiC, has attracted overgrowing interest as a new class of catalyst support in several catalytic reactions. A primary electron tomography study, performed in usual mode, has revealed a dual surface structure defined by two types of porosities made of networks of connected channels with sizes larger than 50 nm and ink-bottled pores with sizes spanning from 4 to 50 nm. Depending on the solvent nature, metal nanoparticles could be selectively deposited inside one of the two porosities, a fact that illustrates a selective wetting titration of the two types of surfaces by different liquids. The explaining hypothesis that has been put forward was that this selectivity against solvents is related to the pore surface oxidation degree of the two types of pores. A new technique of analytical electron tomography, where the series of projections used to reconstruct the volume of an object is recorded in energy filtered mode (EFTEM), has been implemented to map the pore oxidation state and to correlate it with the morphology and the accessibility of the porous network. Applied, for the first time, at a nanoscale resolution, this technique allowed us to obtain 3D elemental maps of different elements present in the analysed porous grains, in particular oxygen; we found thus that the interconnected channel pores are more rapidly oxidized than the ink-bottled ones. Alternatively, our study highlights the great interest of this method that opens the way for obtaining precise information on the chemical composition of a 3D surface at a nanometer scale.

Growth of single-walled carbon nanotubes from sharp metal tips.

The nucleation and growth of single-walled carbon nanotubes is observed in situ in a transmission electron microscope. Carbon atoms are implanted into catalytically active metal particles by electron-beam sputtering. The metal particles are then shaped with a focused electron beam. Once the particles have a region of high surface curvature, spontaneous nucleation and growth of single-walled carbon nanotubes occurs on the metal particles. It is shown that the local solubility of carbon in the metal determines the nucleation of nanotubes. This is confirmed by atomistic computer simulations treating the solubility of carbon in a metal particle as a function of the size of the system.

Microstructural investigation of magnetic CoFe2O4 nanowires inside carbon nanotubes by electron tomography.

Magnetic nanowires of CoFe 2O4 were casted inside the channel of multiwall carbon nanotubes by mild chemical synthesis. A detailed investigation of these nanowires was performed using mainly the electron tomography technique; this study provides a complete characterization of their microstructure in terms of the spatial organization and the size distribution of individual particles forming the nanowire as well as its residual porosity. In particular, we have shown that the size of the CoFe 2O4 monocrystalline particles is closely dependent on the location of the particle within the nanotube, i.e., small particles close to the tube tip (5 nm) and bigger particles inside the tube channel (15 nm). As the theoretical critical size for superparamagnetic relaxation in CoFe 2O4 is estimated within the range of 4-9 nm, the size distribution obtained by 3D-TEM agrees with the Mossbauer study that suggests the presence of two different magnetic components inside the nanowire. We have shown also that, by using this preparation method and for this internal diameter of nanotube, the CoFe 2O4 nanowire exhibits a continuous structure along the tube, has a residual porosity of 38%, and can fill the tube at only 50%, parameters which influence in a significant manner the magnetic behavior of this system.

Donor-acceptor-donor tetrazines containing a ferrocene unit: synthesis, electrochemical and spectroscopic properties.

Donor-acceptor-donor tetrazines containing ferrocene moieties and phenyl unit as a pi-bridge have been synthesized and characterized. UV-vis spectroscopic and cyclic voltamperometric results indicate sizable intramolecular charge transfer interactions in the ground state when the ferrocene is directly bound to the tetrazine. On the other hand, the results show reduction of the electron-donor strength of ferrocene moieties when there is a phenyl linkage. Both tetrazines display a high reduction potential. The role of ferrocenyl groups appear to be detrimental to maximize the cubic hyperpolarizability gamma of tetrazines, as compared to purely organic groups such as thiophene. A possible explanation for this behavior may originate from metal-to-ligand charge transfer processes.