Enhancing Physicochemical Properties and Biocompatibility of Hollow Porous Iron Oxide Nanoparticles through Polymer-Based Surface Modifications.

In this study, we synthesized hollow porous iron oxide nanoparticles (HPIONPs) with surface modifications using polymers, specifically chitosan (Chi), polyethylene glycol (PEG), and alginate (Alg), to improve colloidal stability and biocompatibility. For colloidal stability, Alg-coated HPIONPs maintained size stability up to 24 h, with only an 18% increase, while Chi, PEG, and uncoated HPIONPs showed larger size increases ranging from 64 to 140%. The biocompatibility of polymer-coated HPIONPs was evaluated by assessing their cell viability, genotoxicity, and hemocompatibility. Across tested concentrations from 6.25 to 100 µg/mL, both uncoated and polymer-coated HPIONPs showed minimal cytotoxicity against three normal cell lines: RAW264.7, 3T3-L1, and MCF10A, with cell viability exceeding 80% at the highest concentration. Notably, polymer-coated HPIONPs exhibited nongenotoxicity based on the micronucleus assay and showed hemocompatibility, with only 2-3% hemolysis in mouse blood, in contrast to uncoated HPIONPs which exhibited 4-5%. Furthermore, we evaluated the cytotoxicity of HPIONPs on MDA-MB-231 breast cancer cells after a 2 h exposure to a stationary magnetic field, and the results showed the highest cell death of 38 and 29% when treated with uncoated and polymer-coated HPIONPs at 100 µg/mL, respectively. This phenomenon is attributed to iron catalyzing the Fenton and Haber-Weiss reactions, leading to reactive oxygen species (ROS)-dependent cell death (r ≥ 0.98). In conclusion, the hydrothermal synthesis and subsequent surface modification of HPIONPs with polymers showed improved colloidal stability, nongenotoxicity, and hemocompatibility compared to uncoated HPIONPs while maintaining closely similar levels of cytotoxicity against both normal and cancer cells. This research has paved the way for further exploration of polymer coatings to enhance the overall performance and safety profile of magnetic nanoparticles in delivering anticancer drugs.

Design and development of a magnetic field-enabled platform for delivering polymer-coated iron oxide nanoparticles to breast cancer cells.

The current literature mostly contains relatively vague descriptions of techniques for implementing in vitro magnetic targeting delivery of iron oxide nanoparticles (IONPs), leading to irreproducible processes and incomparable findings. This discrepancy often arises from the varying exposure of IONPs to the non-uniform magnetic field and differences in the concentration of the polymer-coated IONPs. Hence, we meticulously designed and built a system comprising a platform constructed from polyoxymethylene sheets, which securely holds the permanent magnets, and the cell culture plate. We also tailored the preparation process of the IONPs and the in vitro toxicity studies. The inherent characteristics of IONPs are further enhanced by their coating with natural polymers, alginate (Alg) and chitosan (CS).•The design and construction of the platform were carried out using a laser engraving/cutting machine along with graphic design software. The precise locations of the permanent magnets relative to the cell culture plate were determined via a Gaussmeter.•The quantities of the components in the formulation and the method for fabricating the CS/Alg-coated IONPs (CS/Alg-IONPs) were optimized to ensure that the desired physicochemical properties were obtained.•The cultivation and cytotoxicity evaluation of the fabricated CS/Alg-IONPs against MCF-7 breast cancer cells were described.

Lutein-loaded chitosan/alginate-coated Fe3O4 nanoparticles as effective targeted carriers for breast cancer treatment.

Magnetic drug targeting can be a strategy for effectively delivering phytochemicals in cancer treatment. Here, we demonstrate the benefit of magnetic targeting with superparamagnetic iron oxide nanoparticles for cytotoxicity enhancement of lutein (LUT) against breast cancer cells. Fabrication of LUT-loaded chitosan/alginate iron oxide nanoparticles (LUT-CS/Alg-Fe3O4-NPs) was optimized by a statistical approach using response surface methodology based on the Box-Behnken design. The optimized LUT-CS/Alg-Fe3O4-NPs with a balance among LUT concentration, copolymer coating, and iron ion concentration exhibited controlled size, narrow size distribution, better crystallinity, excellent saturation magnetization, and sustained-release profile. The negligible magnetic coercivity and remanent magnetization confirmed the superparamagnetism of the prepared NPs. The optimized LUT-CS/Alg-Fe3O4-NPs were biocompatible while exhibiting a significantly enhanced cytotoxicity towards breast cancer MCF-7 cells upon exposure to a permanent magnet compared to free LUT with a 4-fold increase, suggesting the potential of LUT-CS/Alg-Fe3O4-NPs as magnetically targeted delivery for breast cancer.

Fabrication of Curcumin Diethyl γ-Aminobutyrate-Loaded Chitosan-Coated Magnetic Nanocarriers for Improvement of Cytotoxicity against Breast Cancer Cells.

This study shows the effectiveness of magnetic-guide targeting in the delivery of curcumin diethyl γ-aminobutyrate (CUR-2GE), a prodrug of curcumin (CUR) previously synthesized to overcome unfavorable physicochemical properties of CUR. In this study, chitosan (Ch)-coated iron oxide nanoparticles (Ch-IONPs) were fabricated and optimized using Box-Behnken design-based response surface methodology for delivery of CUR-2GE. Ch was used as a coating material on the nanoparticle surface to avoid aggregation. The optimized condition for preparing Ch-IONPs consisted of using 4 mg Ch fabricated at pH 11 under a reaction temperature of 85 °C. The optimized Ch-IONPs were successfully loaded with CUR-2GE with sufficient loading capacity (1.72 ± 0.01%) and encapsulation efficiency (94.9 ± 0.8%). The obtained CUR-2GE-loaded Ch-IONPs (CUR-2GE-Ch-IONPs) exhibited desirable characteristics including a particle size of less than 50 nm based on TEM images, superparamagnetic property, highly crystalline IONP core, sufficient stability, and sustained-release profile. In the presence of permanent magnets, CUR-2GE-Ch-IONPs significantly increased cellular uptake and cytotoxicity toward MDA-MB-231 with a 12-fold increase in potency compared to free CUR-2GE, indicating the potential of magnetic-field assisted delivery of CUR-2GE-Ch-IONPs for the treatment of triple-negative breast cancer.

Loading Effect of Sol-Gel Derived Barium Hexaferrite on Magnetic Polymer Composites.

Solution-processing methods were investigated as viable alternatives to produce the polymer-bonded barium hexaferrite (BaM). BaM powders were first synthesized by using the sol-gel auto-combustion method. While the ignition period in two synthesis batches varied, the morphology of hexagonal microplates and nanorods, as well as magnetic properties, were reproduced. To prepare magnetic polymer composites, these BaM powders were then incorporated into the acrylonitrile-butadiene-styrene (ABS) matrix with a weight ratio of 80:20, 70:30, and 60:40 by using the solution casting method. Magnetizations were linearly decreased with a reduction in ferrite loading. Compared to the BaM loose powders and pressed pellet, both remanent and saturation magnetizations were lower and gave rise to comparable values of the squareness. The squareness around 0.5 of BaM samples and their composites revealed the isotropic alignment. Interestingly, the coercivity was significantly increased from 1727-1776 Oe in loose BaM powders to 1874-2052 Oe for the BaM-ABS composites. These composites have potential to be implemented in the additive manufacturing of rare-earth-free magnets.

Polyethylene Glycol-Chitosan Oligosaccharide-Coated Superparamagnetic Iron Oxide Nanoparticles: A Novel Drug Delivery System for Curcumin Diglutaric Acid.

Curcumin diglutaric acid-loaded polyethylene glycol-chitosan oligosaccharide-coated superparamagnetic iron oxide nanoparticles (CG-PEG-CSO-SPIONs) were fabricated by co-precipitation and optimized using a Box-Behnken statistical design in order to achieve the minimum size, optimal zeta potential (≥ ±20 mV), and maximum loading efficiency and capacity. The results demonstrated that CG-PEG-CSO-SPIONs prepared under the optimal condition were almost spherical in shape with a smooth surface, a diameter of 130 nm, zeta potential of 30.6 mV, loading efficiency of 83.3%, and loading capacity of 8.3%. The vibrating sample magnetometer results of the optimized CG-PEG-CSO-SPIONs showed a superparamagnetic behavior. Fourier transform infrared spectroscopy and X-ray diffraction analyses indicated that the CG physically interacted with PEG-CSO-SPIONs. In addition, the CG-PEG-CSO-SPIONs could be stored dry for up to 12 weeks or in aqueous solution for up to 4 days at either 4 °C or 25 °C with no loss of stability. The CG-PEG-CSO-SPIONs exhibited a sustained release profile up to 72 h under simulated physiological (pH 7.4) and tumor extracellular (pH 5.5) environments. Furthermore, the CG-PEG-CSO-SPIONs showed little non-specific protein binding in the simulated physiological environment. The CG-PEG-CSO-SPIONs enhanced the cellular uptake and cytotoxicity of CG against human colorectal adenocarcinoma HT-29 cells compared to free CG, and more CG was delivered to the cells after applying an external magnetic field. The overall results suggest that PEG-CSO-SPIONs have potential to be used as a novel drug delivery system for CG.

Synthesis and cytotoxicity study of magnesium ferrite-gold core-shell nanoparticles.

In this work, the core-magnesium ferrite (MgFe2O4) nanoparticles were prepared by hydrothermal technique. Completed gold (Au) shell coating on the surfaces of MgFe2O4 nanoparticles was obtained by varying core/shell ratios via a reduction method. Phase identification, morphological evolution, optical properties, magnetic properties and cytotoxicity to mammalian cells of these MgFe2O4 core coated with Au nanoparticles were examined by using a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy, UV-visible spectroscopy (UV-vis), vibrating sample magnetometry and resazurin microplate assay techniques. In general, TEM images revealed different sizes of the core-shell nanoparticles generated from various core/shell ratios and confirmed the completed Au shell coating on MgFe2O4 core nanoparticles via suitable core/shell ratio with particle size less than 100 nm. The core-shell nanoparticle size and the quality of coating influence the optical properties of the products. The UV-vis spectra of complete coated MgFe2O4-Au core-shell nanoparticles exhibit the absorption bands in the near-Infrared (NIR) region indicating high potential for therapeutic applications. Based on the magnetic property measurement, it was found that the obtained MgFe2O4-Au core-shell nanoparticles still exhibit superparamagnetism with lower saturation magnetization value, compared with MgFe2O4 core. Both of MgFe2O4 and MgFe2O4-Au core-shell also showed in vitro non-cytotoxicity to mouse areola fibroblast (L-929) cell line.

Low-cost Sensors Based on the GMI Effect in Recycled Transformer Cores.

Sensors based on the giant magnetoimpedance (GMI) effect in silicon steelswere constructed. Strips of silicon steels (0.500 mm-thick, 35.0 mm-long) with widthsranging from 0.122 to 1.064 mm were cut from recycled transformer cores. Since amaximum GMI ratio of 300% and a maximum field sensitivity of 1.5%/Oe were observedin a 1.064 mm-wide sample at 200 kHz, the 1.064 mm-wide strips were chosen as sensingelements in a slot key switch, angular velocity sensor, current sensor and force sensor. Thesensing elements were integrated into electronic circuits and the changes in impedancewere monitored. Variations in voltage due to these changes were typically small and musttherefore be amplified by the electronic circuits. For the current sensor and force sensor,the variation in the voltage drop across the GMI sensing element had non-linear variationswith either current or force and a conversion formula from a computer program wastherefore needed. The performance of the systems was tested. These sensing systems werestable, highly sensitive, hysteresis-free and could be produced on a mass scale. Based ontheir GMI effect, the silicon steels are versatile alternative low-cost sensors.