ABSTRACT
We present a theoretical approach to generate a nondiffracting beam with extended depth of focus (DOF) and a smaller focal spot along the optical axis, by tight focusing of an azimuthally polarized beam with a circular symmetrical binary phase mask and an interference effect over a high-numerical-aperture (NA) lens axicon system. We find a general azimuthal diffraction integral for the circularly symmetric binary phase mask and examine it in two special cases: a high-NA lens and a high-NA lens axicon. The azimuthally polarized beam remains well behaved in both cases. We verify that the longitudinal component generated by azimuthally polarized illumination produces the narrowest spot size for a wide range of geometries. Finally, we discuss the effects of tight focusing on a dielectric interface and provide some ideas for circumventing the effects of the binary phase mask interface and even utilize them for spot size reduction.
ABSTRACT
We investigate the focusing properties of a double-ring-shaped azimuthally polarized beam by a high numerical aperture (NA) lens axicon based on vector diffraction theory. We observe that our proposed system generates a sub wavelength focal hole of 0.5λ having large uniform focal depth of 48λ without any annular aperture. We also observed that the distribution of the total intensity near the focus has little variation with the degree of truncation ß of the incident beam by the pupil. The authors expect such a super-long dark channel may find applications in optical, biological, and atmospheric sciences.
ABSTRACT
We present results of numerical analysis of the Strehl ratio characteristics for the light sword optical element (LSOE). For comparison there were analyzed other optical imaging elements proposed for compensation of presbyopia such as the bifocal lens, the trifocal lens, the stenopeic contact lens, and elements with extended depth of focus (EDOF), such as the logarithmic and quartic axicons. The simulations were based on a human eye's model being a simplified version of the Gullstrand model. The results obtained allow to state that the LSOE exhibits much more uniform characteristics of the Strehl ratio comparing with other known hitherto elements and therefore it could be a promising aid to compensate for the insufficient accommodation range of the human eye.
Subject(s)
Eyeglasses , Lenses , Presbyopia/rehabilitation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Humans , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
The paper analyzes the imaging properties of the light sword optical element (LSOE) applied as a contact lens to the presbyopic human eye. We performed our studies with a human eye model based on the Gullstrand parameterization. In order to quantify the discussion concerning imaging with extended depth of focus, we introduced quantitative parameters characterizing output images of optotypes obtained in numerical simulations. The quality of the images formed by the LSOE were compared with those created by a presbyopic human eye, reading glasses and a quartic inverse axicon. Then we complemented the numerical results by an experiment where a 3D scene was imaged by means of the refractive LSOE correcting an artificial eye based on the Gullstrand model. According to performed simulations and experiments the LSOE exhibits abilities for presbyopia correction in a wide range of functional vision distances.
Subject(s)
Contact Lenses , Eye/physiopathology , Models, Biological , Presbyopia/physiopathology , Presbyopia/rehabilitation , Therapy, Computer-Assisted/methods , Computer Simulation , Equipment Failure Analysis , Humans , Prosthesis DesignABSTRACT
The focal field of high NA lens axicon with a binary-phase optical component is calculated by using vector diffraction theory. Numerical results show that for a radially polarized Bessel Gaussian input field, the proposed system generates a subwavelength (0.395λ) longitudinally polarized beam with large uniform depth of focus (approximately 6 λ).
Subject(s)
Computer-Aided Design , Lenses , Refractometry/instrumentation , Equipment Design , Equipment Failure Analysis , Light , Scattering, RadiationABSTRACT
The paper presents first experiments with a refractive light sword optical element (LSOE). A refractive version of the LSOE was prepared in photoresist by gray scale photolithography. Then we examined chromatic aberrations of the produced element and compared them with those corresponding to two different lenses. For this purpose we performed two experiments, the first one where white light illumination was used and the latter one by the help of monochromatic illumination with three different wavelengths. The obtained results lead to the conclusion that the refractive LSOE does not exhibit significant chromatic aberrations and can be successfully used for imaging with extended depth of focus in polychromatic illumination.
ABSTRACT
The paper presents imaging properties of modified lenses with the radial and the angular modulation. We analyze three following optical elements with moderate numerical apertures: the forward logarithmic axicon and the axilens representing the radial modulation as well as the light sword optical element being a counterpart of the axilens with the angular modulation. The abilities of the elements for imaging with extended depth of focus are discussed in detail with the help of structures of output images and modulation transfer functions corresponding to them. According to the obtained results only the angular modulation of the lens makes possible to maintain the acceptable resolution, contrast and brightness of the output images for a wide range of defocusing. Therefore optical elements with angular modulations and moderate numerical apertures seem to be especially suitable for imaging with extended focal depth.
ABSTRACT
We report a diffractive-lens triplet with which to achieve wavelength compensation in the near field diffracted by any aperture. On the one hand, the all-diffractive triplet allows us to tune, in a sequential way, the Fresnel-irradiance shape to be achromatized by changing the focal length of one diffractive lens. On the other hand, we can adjust the scale of the chromatically compensated Fresnel diffraction field by shifting the aperture along the optical axis. Within this framework, we present an extremely flexible white-light Fresnel-plane array illuminator based on the kinoform sampling filter. A variable compression ratio and continuous selection of the output pitch are the most appealing features of this novel application.
ABSTRACT
We present a new optical assembly with which to achieve Lau fringes with totally incoherent illumination. Gratinglike codification of the spatially incoherent source combined with an achromatic Fresnel diffraction setup allows us to achieve Lau fringe-pattern visibility of almost 100% with broadband light. The white-light character to our proposed setup is in stark contrast to previous monochromatic implementations. Potential implications of this fact are identified.
ABSTRACT
A general, noniterative method for designing diffractive axicons is derived. This new technique clarifies the earlier phenomenological design principle that was used for coherent light and extends it to the domain of partial coherence. The approach is based on the method of stationary phase in fluctuating diffracted wave fields, and it applies to arbitrary axially symmetric radiation of the Schell-model type. It is shown that the general design equation can be solved numerically, in a straightforward way, for any reasonable illumination and image specifications.
ABSTRACT
A new theoretical model of the Lau effect is presented. The transmittance of a diffraction grating can be expressed in an equivalent form as the sum of transmittances of thin cylindrical lenses. Therefore it is possible to explain the Lau effect on the basis of the well-known imaging properties of lenses. According to the given approach, the Lau fringes are created by overlapped images of the first grating that are formed by a set of lenses corresponding to the second grating in the setup. The theory leads to an exhaustive description of the Lau-effect parameters. In particular, one can indicate the shape of the Lau fringes and localize planes of the fringes dependent on the axial distance between gratings and their periods.
Subject(s)
Lenses , Models, Theoretical , Optics and Photonics , Light , Scattering, RadiationABSTRACT
The intensity pattern produced by the zero-order Bessel beam can be squeezed along certain directions if it interferes with the Bessel beam of a higher order. The concept of directional narrowing can be extended onto the zone plates by the division of the aperture into a set of concentric annuli; within some of the apertures the phase function of the spherical optical element is substituted or supplemented by the spiral optical element. The proposed approach is verified by the numerical simulation of the interference of Bessel beams, linear axicons, and spherical zone plates of zero order and second order.
ABSTRACT
The characteristic dimensions of Bessel beams are fully determined by the corresponding Bessel functions. We consider a way of obtaining a narrower diameter of the central core of a diffractive pattern generated by the Bessel beams. The method relies on superposition of two or more Bessel beams with appropriately chosen amplitudes and widths. The disturbing influence of the aperture's edges can be eliminated by addition of the proper amplitude filter.
ABSTRACT
The axial intensity of axicons illuminated by a coherent wave usually exhibits rapid oscillations from diffraction on the sharp edges of the aperture of the element. These oscillations can be suppressed when the diffractive version of the axicon is illuminated from a polychromatic source. This possibility is examined based on the example of the annular-aperture logarithmic axicon. The estimate for the wavelength interval of the illuminating source required for uniformization is obtained with the help of the stationary-phase method. Furthermore the shape of the radial intensity distribution can be maintained almost unchanged. These findings are confirmed by numerical evaluation of the Fresnel diffraction integral.
ABSTRACT
A novel measurement technique based on phase-stepping microinterferometry is proposed for the refractive-index profiling of planar waveguides fabricated by ion exchange in glass. The sample preparation simplicity and easy instrumental implementation, together with high accuracy and improved resolution, are argued.
ABSTRACT
We show that the apodized annular-aperture logarithmic axicon preserves excellent uniformity of the on-axis intensity, energy flow, and lateral resolution. Numerical evaluation of the Fresnel diffraction integral leads to results very close to geometrical-optics predictions. Once again the geometrical law of energy conservation turns out to be a useful tool in designing axicons.
ABSTRACT
The generation of diffractive elements of variable optical parameters and high diffraction efficiency is presented. It can be realized by a superposition of two conjugate kinoforms. In particular, the method gives rise to zone plates of variable focusing power as well as to circular and linear gratings of variable deflection angles. The theoretical description is illustrated by an experimental example of the blazed grating with a changeable period; some possible applications are mentioned.
ABSTRACT
A method for determining the phase-retardation function of the uniform-intensity axilens is discussed and compared with that of an earlier publication [Opt. Lett. 16, 523 (1991)]. Within the presented formulation good agreement is achieved between the geometrical-optics prediction and the numerically evaluated diffraction integral.
ABSTRACT
Computer-designed linear and circular zone plates are considered that utilize a pi ;-phase jump in order to create destructive interference in the focus. Intensity distributions in the focal plane as well as along the optical axis are calculated for a few examples. A significant decrease of the black spot diameter in comparison with the dimensions of the ordinary focal spot is obtained. Further reduction is achieved when the central region of the zone plate is obstructed. Some applications to alignment and the schlieren technique are suggested. Experimental results that confirm the calculated distributions are presented.