EDTA functionalized pine needle biochar (EDTA@BC); a valorized bio-material for removal of Ni(II) from aqueous solution.

The preparation of ethylenediaminetetraacetic acid (EDTA) functionalized pine needles biochar (EDTA@BC) as a low-cost active adsorbent and its effectiveness in removing Ni(II) from aqueous solution at various conditions is reported in this paper. First, alkali activation was selected to render the pine needle biochar with an excellent porous structure and increased concentration of hydroxyl groups to facilitate grafting. Subsequently, a simple method was utilized to graft EDTA onto the biochar. The prepared EDTA@BC was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive x-ray spectrometry (EDX). Batch adsorption studies were conducted to assess the impact of various parameters such as solution pH, adsorbent dosage, adsorbate volume, and shaking time on the removal efficiency of Ni(II). At pH 6, 100 mg dosage, 4 mL of adsorbate volume, and 10 min of shaking time, the maximum removal efficiency of Ni(II) was observed to be 89%. EDTA@BC showed reasonable sorption performance still after the third cycle of regeneration. The effect of interfering ions such as Pb, Cr, Cu, and Hg was evaluated, resulting a decrease of 69%, 78%, 76%, and 68%, respectively, in its sorption capacity. The Langmuir model provided a better fit for Ni(II) in the concentration range of 0.1-2000 ppm under optimized conditions, with qmax of 46.69 ± 1.031 mg/g and KL of 0.001, compared with the Freundlich isotherm, which yielded n = 0.234 and χ2 = 2.7899, Temkin isotherm (R2 = 0.9520), and Redlich-Peterson isotherm (R2 = 0.9725). The removal of Ni(II) by EDTA@BC was found to be the pseudo-second-order kinetics. Thermodynamic studies indicated adsorption process to be endothermic and nonspontaneous. Hence, a sustainable valorized bio-material (EDTA@BC) is prepared having better sorption efficiency of Ni(II) from aqueous solution with possible wide applicability. RESEARCH HIGHLIGHTS: New EDTA functionalized indigenous pine needles biochar (EDTA@BC) was prepared. This low-cost active adsorbent found effective in removing Ni(II) from aqueous solution. FTIR, SEM, and EDX proved synthesis and uptake of Ni(II) from aqueous solution. Ni(II) removal, regeneration, interfering and adsorption studies were performed by UV-Vis spectroscopy.

Radical scavenging potential of spectrophotometric, spectroscopic, microscopic, and EDX observed zinc oxide nanoparticles from leaves, buds, and flowers extract of Bauhinia Variegata Linn: A thorough comparative insight.

The present study incorporated an environment-friendly and cost-efficient green synthesis method for fabricating zinc oxide nanoparticles (ZnO-NPs) using various parts (leaves, buds, and flowers) of Bauhinia Variegate Linn. UV-Spectrophotometric analysis was used to confirm the synthesis of ZnO-NPs, which showed an absorption band within 360-380 nm range. Further techniques like FT-IR spectroscopy and (SEM) scanning electron microscopy equipped with a novel EDX were also included to confirm the synthesis, size, and shape of ZnO-NPs. Results obtained by FT-IR showed that the phytochemicals present in the ethanolic extract successfully acted as a capping agent. SEM micrographs confirmed irregularly shaped nanoparticles with an average size of 70-80 nm. The presence of Zinc and Oxygen peaks in EDX also confirmed the successful synthesis of ZnO nanoparticles. The radical scavenging (antioxidant) potential of prepared nanoparticles was also evaluated by DPPH radical assay. The ZnO-NPs obtained from the ethanolic extract of buds showed the highest %RSA (86%) as compared to the flowers (79%) and leaves (76%). The current study findings showed the versatile morphology of all parts of the plant with significant antioxidant potential, establishing the use of Bauhinia Variegate in biological systems for various biomedical applications. RESEARCH HIGHLIGHTS: A thorough comparative analysis of the radical scavenging power of major parts of the Bauhinia Variegate, which is 1st of its kind. Extensive characterization using UV-Vis spectrophotometry, FT-IR, SEM, and EDX to observe the conformational and morphological changes. Analysis of the reduction potential of leaves, buds, and flowers of a single plant for future directions in green synthesis.

Enhancing Tensile Strength, Thermal Stability, and Antioxidant Characteristics of Transparent Kappa Carrageenan Films Using Grapefruit Essential Oil for Food Packaging Applications.

The trends in food packaging technologies are shifting toward utilizing natural and environmentally friendly materials prepared from biopolymers such as kappa carrageenan to replace synthetic polymers. In the current study, varying amounts (0.1, 0.2, and 0.3%) of grapefruit essential oil (GFO) were incorporated in kappa carrageenan-based edible films to improve their physicochemical properties. The developed film samples were characterized for their barrier, mechanical, morphological, optical, thermal, antioxidant, and biodegradable properties. The results obtained showed that the tensile strength of the carrageenan films enhanced significantly from 65.20 ± 4.71 to 98.21 ± 6.35 MPa with the incorporation of GFO in a concentration-dependent manner. FTIR and SEM analysis confirmed the intermolecular bonding between carrageenan and GFO, resulting in the formation of compact films. Incorporating GFO significantly enhanced the thermal resistance of oil-loaded films, as confirmed by TGA, DSC, and DTG analysis. The addition of GFO led to a substantial increase in the radical scavenging activity of the films, as evidenced by the DPPH and ABTS assays. Furthermore, the developed films were biodegradable in soil and seawater environments, indicating their potential as a sustainable alternative to traditional plastics. Findings demonstrated that GFO can be used as a natural antioxidant agent in kappa carrageenan-based films for potential applications in food packaging.

Psychological impact of the COVID-19 pandemic in children with autism spectrum disorder - a literature review.

Objective: This review summarizes evidence pertaining to the impact of the COVID-19 pandemic on the psychological health of children and adolescents with autism spectrum disorder (ASD). Materials and Methods: An electronic search was conducted using four major databases: PubMed, ScienceDirect, Web of Science, and Google Scholar. Using an umbrella methodology, the reference lists of relevant papers were reviewed, and citation searches were conducted. The study included articles written in English between January 2020 and March 2021 that focused on the psychological health of autistic children and adolescents. Results: All eight studies included in the final review were cross-sectional. Three of the eight studies were conducted in Italy, two in Turkey, and one study each in Portugal, Spain, and the United Kingdom, with a total of 1,407 participants. All studies used a mixture of standardized and non-standardized questionnaires to collect data. The total number of patients were 1407 at a mean age of 9.53 (SD = 2.96) years. Seven studies report gender; male 74.7% (657/880) and female 25.3% (223/880). The finding showed that behavioral issues in children and adolescents with ASD have significantly increased; 521 (51.9 percent) of the 1004 individuals with ASD presented with behavioral changes, including conduct problems, emotional problems, aggression, and hyperactivity. Some studies also found increased anxiety and difficulties managing emotions. Only one study reported clinical stabilization in children with ASD during COVID-19. Finally, 82.7% of families and caregivers of children with ASD (544 out of 658) faced challenges during COVID-19. Conclusion: Although the studies in this review suggest a general worsening of ASD children's clinical status, it remains difficult to draw definitive conclusions at this moment, with newer COVID-19 variants on the rise worldwide. During this difficult pandemic period, caregivers, families, and healthcare professionals are recommended to pay more attention to the ASD patients' health and care needs.

Single anastomosis duodenal switch versus Roux-en-Y gastric bypass in patients with BMI ≥ 50 kg/m2: a multi-centered comparative analysis.

BACKGROUND: Roux-en-Y gastric bypass (RYGB) has consistently demonstrated excellent weight loss and comorbidity resolution. However, outcomes vary based on patient's BMI. Single anastomosis duodeno-ileostomy with sleeve (SADI-S) is a novel procedure with promising short-term results. The long-term outcomes of SADI-S in patients with BMI ≥ 50 kg/m2 are not well described. We aim to compare the safety and efficacy of SADI-S with RYGB in this patient population. METHODS: We performed a multicenter retrospective study of patients with a BMI ≥ 50 kg/m2 who underwent RYGB or SADI-S between 2008 and 2023. Patient demographics, peri- and post-operative characteristics were collected. Complication rates were reported at 6, 12, 24, and 60 months postoperatively. A multivariate linear regression was used to evaluate and compare weight loss outcomes between both procedures. RESULTS: A total of 968 patients (343 RYGB and 625 SADI-S; 68.3% female, age 42.9 ± 12.1 years; BMI 57.3 ± 6.7 kg/m2) with a mean follow-up of 3.6 ± 3.6 years were included. Patients who underwent RYGB were older, more likely to be female, and have a higher rate of sleep apnea (p < 0.001), hypertension (p = 0.015), dyslipidemia (p < 0.001), and type 2 diabetes (p = 0.016) at baseline. The rate of bariatric surgery-specific complications was lower after SADI-S compared to RYGB. We reported no bariatric surgery related deaths after 1 year following both procedures. SADI-S demonstrated statistically higher and sustained weight loss at each time interval compared to RYGB (p < 0.001) even after controlling for multiple confounders. Lastly, the rate of surgical non-responders was lower in the SADI-S cohort. CONCLUSIONS: In our cohort, SADI-S was associated with higher and sustained weight-loss results compared to RYGB. Comorbidity resolution was also higher after SADI-S. Both procedures demonstrate a similar safety profile. Further studies are required to validate the long-term safety of SADI-S compared to other bariatric procedures.

Efficacy, safety, and tolerability of xanomeline for schizophrenia spectrum disorders: a systematic review.

INTRODUCTION: We systematically reviewed extant studies evaluating the efficacy and tolerability of xanomeline and xanomeline-trospium (KarXT) for treatment of adults with schizophrenia. METHODS: In accordance with PRISMA guidelines, articles were systematically searched for in databases and clinical trial registries. RESULTS: A total of 4 preclinical trials and 3 randomized controlled trials (RCTs) were included in this review. A 4-week RCT observed a difference of 24.0 points (SD 21.0) in the Positive and Negative Syndrome Scale (PANSS) total score between xanomeline and placebo groups (p = 0.039). A 5-week RCT observed PANSS total score changes from baseline to week 5, including -17.4 and -5.9 points in KarXT and placebo groups, respectively (LSMD -11.6 points; 95% CI -16.1 to -7.1; p < 0.001; d = 0.75). Another 5-week RCT observed PANSS total score changes from baseline to week 5, including -21.2 (SE 1.7) and -11.6 (SE 1.6) points in KarXT and placebo groups, respectively (LSMD -9.6; 95% CI -13.9 to -5.2; p < 0.0001; d = 0.61). Side effects include constipation, nausea, vomiting, dyspepsia, and dry mouth. CONCLUSION: KarXT offers an innovative non-D2 blocking approach, representing a promising treatment avenue for schizophrenia.

The physicochemical properties and molecular docking study of plasticized amphotericin B loaded sodium alginate, carboxymethyl cellulose, and gelatin-based films.

Plasticizers are employed to stabilize films by safeguarding their physical stability and avoiding the degradation of the loaded therapeutic drug during processing and storage. In the present study, the plasticizer effect (glycerol) was studied on bioadhesive films based on sodium alginate (SA), carboxymethyl cellulose (CMC) and gelatin (GE) polymers loaded with amphotericin B (AmB). The main objective of the current study was to assess the morphological, mechanical, thermal, optical, and barrier properties of the films as a function of glycerol (Gly) concentration (0.5-1.5 %) using different techniques such as Scanning Electron Microscope (SEM), Texture analyzer (TA), Differential Scanning Calorimeter (DSC), X-Ray Diffraction (XRD), and Fourier Transforms Infrared Spectroscopy (FTIR). The concentration increase of glycerol resulted in an increase in Water Vapor Permeability (WVP) (0.187-0.334), elongation at break (EAB) (0.88-35.48 %), thickness (0.032-0.065 mm) and moisture level (17.5-41.76 %) whereas opacity, tensile strength (TS) (16.81-0.86 MPa), and young's modulus (YM) (0.194-0.002 MPa) values decreased. Glycerol incorporation in the film-Forming solution decreased the brittleness and fragility of the films. Fourier Transform Infrared (FTIR) spectra showed that intermolecular hydrogen bonding occurred between glycerol and polymers in plasticized films compared to control films. Furthermore, molecular docking was applied to predict the binding interactions betweem AmB, CMC, gelatin, SA and glycerol, which further endorsed the stabilizing effects of glycerol in the complex formation between AmB, CMC, SA, and gelatin. The Findings of the current study demonstrated that this polymeric blend could be used to successfully prepare bioadhesive films with glycerol as a plasticizer.

Structural, mechanical, barrier and antioxidant properties of pectin and xanthan gum edible films loaded with grapefruit essential oil.

This research focused on the development of films based on pectin and xanthan gum composite loaded with different concentrations of grapefruit essential oil (GFO). The fabricated films were characterized to assess the effect of GFO on the structural, mechanical, barrier, chemical, and antioxidant properties. The addition of GFO enhanced the functional properties of the films, as confirmed by FTIR analysis showing molecular interactions within the film matrix. SEM observations revealed that films with higher GFO content had a smoother, more compact structure with uniform oil distribution. Films loaded with oil demonstrated enhanced water resistance, as their decreased permeability ranged from 0.733 ± 0.009 to 0.561 ± 0.020 (g mm)/(m2.h.kPa). Additionally, these films showed a notable increase in tensile strength, ranging from 2.91 ± 0.19 to 8.55 ± 0.62 MPa. However, the addition of oil led to a reduction in the elongation at break of the films, which decreased from 52.84 ± 3.41 % to 12.68 ± 1.52 %, and a decline in transparency from 87.57 ± 0.65 % to 76.18 ± 1.12 %. Fabricated films exhibited enhanced antioxidant properties, as evidenced by increased DPPH• and ABTS•+ radical scavenging activities with the addition of GFO. The findings of the current study suggest that GFO is an effective natural additive for enhancing the physiochemical properties of pectin and xanthan gum-based films, making them more suitable for food packaging applications.

Reflux After Sleeve Gastrectomy: Safety and Effectiveness of Laparoscopic Ligamentum Teres Cardiopexy, a Single-Center Experience.

BACKGROUND: Obesity is a well-known risk factor for gastroesophageal reflux disease (GERD). Even though symptoms may be mitigated or resolved with the weight loss caused by sleeve gastrectomy (SG), it may be associated with higher incidences of postoperative GERD. Ligamentum teres cardiopexy (LTC) is an alternative to Roux-en-Y gastric bypass, the gold standard treatment for GERD. METHODS: This study was a retrospective single-center chart review, all patients in this cohort underwent LTC to treat refractory GERD at our institution. The option for LTC was presented after patients' refusal to undergo RYGB conversion. We collected baseline characteristics, standard demographics, pre-operative tests and imaging, and SG information, as well as intraoperative and perioperative data regarding LTC, and postoperative complications. RESULTS: Our cohort included 29 patients; most were Caucasian (44.8%) females (86.2%). The mean weight and BMI before LTC were 216.5 ± 39.3 lb and 36.1 ± 5.4 kg/m2, respectively. Mean total body-weight loss (TBWL) at 12 and 24 months were 28.7% ± 9.5% and 28.4% ± 12.4%, respectively. The mean interval between the index bariatric surgery and LTC was 59.9 ± 34.9 months, mean operative time was 67 ± 18.2 min, and median length of stay (LOS) was 1 day (IQR = 1-2 days). Twelve patients (57.1%) were able to discontinue antisecretory medications, while 9 (42.9%) still required them to remain asymptomatic. Mortality and reoperation rates were 0% and the incidence of complication was 19.4% (n = 6). CONCLUSIONS: LTC is a safe and effective surgical alternative to treat refractory GERD symptoms after SG.

Tuning the structure and physiochemical properties of sodium alginate and chitosan composite films through sodium tripolyphosphate (STPP) crosslinking.

Sodium tripolyphosphate (STPP), an inorganic and non-toxic polyphosphate, has potential applications as a crosslinking agent in the fabrication of edible films. This study utilized STPP in the development of sodium alginate-chitosan composite films, with a focus on their suitability for food packaging applications. The results indicate that the incorporation of STPP led to an increase in film thickness (from 0.048 ± 0.004 to 0.078 ± 0.008 mm), elongation at break (from 11.50 ± 1.49 % to 15.88 ± 2.14 %), water permeation (from 0.364 ± 0.010 to 0.521 ± 0.021 gmm/(m2h*kPa)), and moisture content (from 25.98 ± 0.20 % to 28.12 ± 0.17 %). In contrast, there was a decrease in tensile strength (from 30.23 ± 2.08 to 25.60 ± 1.22 MPa) and swelling index (from 752.9 ± 17.1 to 533.5 ± 8.9 %). Scanning electron microscopy (SEM) analysis revealed the formation of distinctive needle-like microcrystals with the incorporation of STPP. Fourier-transform infrared spectroscopy (FTIR) analysis indicated intermolecular interactions between STPP and the film-forming biopolymers. The data obtained from Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) demonstrated enhanced thermal stability of STPP-loaded films at elevated temperatures. Furthermore, the films exhibited increased DPPH scavenging activity with the addition of STPP. This study underscores the potential of STPP as a crosslinking agent for the development of composite edible films, suggesting applications in the field of food packaging.

Management of Malnutrition and Hepatic Impairment After Duodenal Switch.

BACKGROUND: Malnutrition and liver impairment after duodenal switch (DS) are possible and undesired complications, often conservatively treated. However, in specific cases, surgical revision may be necessary. This study aims to describe outcomes achieved by two bariatric surgery centers and address effectiveness and safety of revisional surgical procedures to resolve these complications. METHODS: A retrospective chart review was performed in two bariatric surgery centers from 2008 to 2022. Patients who required revisional surgery to treat malnutrition and/or liver impairment refractory to nutritional and total parenteral nutrition intervention (TPN) after duodenal switch were included. No comparisons were performed due to the descriptive nature of this study. RESULTS: Thirteen patients underwent revisional surgery, the mean age was 44.7, the 53.8% were females, and the mean preoperative BMI was 54.7 kg/m2; the mean time between DS and revisional procedure was 26.5 months, and 69.1% of patients were placed on TPN. One patient developed hepatic encephalopathy; one patient presented with ascites, pleural effusion, and renal insufficiency, undergoing reoperation after revisional procedure due to a perforated ileal loop. Mortality rate was 0%; all patients regained weight after the revisional procedure, and the mean total protein and albumin blood levels 12 months after surgery were 6.3 and 3.6 g/dl, respectively. CONCLUSIONS: While refractory malnutrition and/or liver failure are rare among patients post-DS, if underdiagnosed and untreated, this can lead to irreversible outcomes and death. All revisional procedures included in this study resulted in improvement of the nutritional status and reversal of liver impairment, with low complication rates.

Pectin/sodium alginate films tailored with Acetyl-11-keto-beta-boswellic acid for active packaging.

The present study aimed to develop food packaging films by using a combination of pectin (PE) and sodium alginate (SA) enriched with Acetyl-11-keto-beta-boswellic acid (AKBA) as a functional or active ingredient. The fabricated films underwent comprehensive evaluation of their morphological, chemical, mechanical, barrier, optical, thermal, antioxidant, and antimicrobial properties. SEM and FTIR analysis showed that AKBA had good compatibility with film-forming components. The AKBA-loaded film samples exhibited a decrease in their barrier properties and tensile strength, but enhancements in both elongation at break and thickness values was observed. With the addition of AKBA, a significant increase (p < 0.05) in the ultraviolet barrier properties of the films and total colour variation (ΔE) was observed. TGA analysis of the films unveiled an improvement in thermal resistance with the incorporation of AKBA. Moreover, the films loaded with AKBA exhibited potent antioxidant activity in the ABTS and DPPH assay methods. Disk diffusion analysis showed the antimicrobial activity of AKBA-loaded films against P. aeruginosa, highlighting the potential of AKBA as a natural antimicrobial agent for the safety of food products. The results demonstrate the practical application of PE and SA active films loaded with AKBA, particularly within the food packaging industry.

Novel applications of black pepper essential oil as an antioxidant agent in sodium caseinate and chitosan based active edible films.

In the current study, sodium caseinate and chitosan-based composite edible films were developed with the incorporation of black pepper (Piper nigrum) essential oil (BPO) in various concentrations (0.05, 0.1 and 0.15 %) for potential food packaging applications. The chemical composition of BPO was determined using GCMS and the major compound detected were ß-caryophyllene, limonene, ß-phellandren, pinene, copaene and α-humulene. The addition of BPO resulted in an increase in the thickness, EAB, WVP, moisture content and swelling index values of the films; however, the TS and water solubility decreased. The inclusion of BPO led to a substantial enhancement in the DPPH and ABTS radical scavenging capabilities of the edible films. SEM micrographs demonstrated intermolecular interaction between BPO, sodium caseinate, and chitosan. FTIR spectra confirmed the interaction of the functional groups of the polymers and BPO. The incorporation of the BPO increased the crystallinity of the films. Moreover, the thermal analysis including TGA, DSC and DTG demonstrated an increase in the thermal stability of the edible films with the addition of the BPO. These findings demonstrated that sodium caseinate and chitosan composite based edible films loaded with BPO can be used as sustainable active food packaging material.

Lignocellulosic ethanol and butanol production by Saccharomyces cerevisiae and Clostridium beijerinckii co-culture using non-detoxified corn stover hydrolysate.

Considering global economic and environmental -benefits, green renewable biofuels such as ethanol and butanol are considered as sustainable alternatives to fossil fuels. Thus, developing a co-culture strategy for ethanol and butanol production by Saccharomyces cerevisiae and Clostridium beijerinckii has emerged as a promising approach for biofuel production from lignocellulosic biomass. This study developed a co-culture of S. cerevisiae and C. beijerinckii for ethanol and butanol production from non-detoxified corn stover hydrolysate. By firstly inoculating 3 % S. cerevisiae and then 7 % C. beijerinckii with 8-10 h time intervals, the optimized co-culture process gave 24.0 g/L ABE (20.8 g/L ethanol and 2.4 g/L butanol), obtaining ABE yield and productivity of 0.421 g/g and 0.55 g/L/h. The demonstrated co-culture strategy made full use of hexose and pentose in hydrolysate and contributed to total yield and efficiency compared to conventional ethanol or ABE fermentation, indicating its great potential for developing economically feasible and sustainable bioalcohols production.

Proximal radiolucent lines around fully hydroxyapatite-coated tapered femoral stems: should we be concerned?

INTRODUCTION: Radiolucent lines occasionally develop around the proximal aspect of fully hydroxyapatite (HA)-coated tapered femoral stems after total hip arthroplasty (THA). It was hypothesised that distal wedging of stems may predispose to proximal radiolucent line formation, which may negatively impact clinical outcome. METHODS: All primary THA performed with a collarless fully HA-coated stem that had a minimum of 1 year of radiographic follow-up were identified in a surgical database (n = 244). Radiographic measures of proximal femoral morphology and femoral canal fill at the middle and distal thirds of the stem were analysed for association with the presence of proximal radiolucent lines. Linear regression was used to explore any association between radiolucent lines and patient reported outcome measures (PROMs), available in 61% of patients. RESULTS: Proximal radiolucent lines developed in 31 cases (12.7%) at final follow-up. Dorr A femoral morphology and increased canal-fill at the distal ⅓ of the stem correlated with the development of radiolucent lines (p < 0.001). No correlation was observed between pain or PROMs and the presence of proximal radiolucent lines. DISCUSSION: We observed an unexpectedly high incidence of proximal femoral radiolucent lines about collarless fully HA coated stems. Distal-only implant wedging in Dorr A bone may compromise proximal fixation. Although this finding did not correlate with short-term outcomes, the long-term clinical impact requires further study.

UV-spectrophotometric Optimization of Temperature, pH, Concentration and Time for Eucalyptus Globulus Capped Silver Nanoparticles Synthesis, their Characterization and Evaluation of Biological Applications.

Morphology (size, shape) and structural variations (bonding pattern, crystallography, and atomic arrangements) have significant impacts on the efficacy of the metallic nanoparticles. Fabrication of these metal nanoparticles through green synthesis using plant extracts has increased attention due to their low cost, less hazardous byproducts, and multiple applications. In present study, Eucalyptus globulus extract was used to synthesize silver nanoparticles (AgNPs). Change of color from light brown to reddish brown and UV-visible spectral peak at 423 nm confirmed the formation of AgNPs. The shifting of FTIR spectra peaks indicated the potential role of the functional groups in extract as capping agents. The DLS evaluated the average size and stability of the nanoparticles while the surface morphology, size and the elemental composition of the AgNPs was established by the FESEM and EDX analysis. The SEM images revealed spherical nanoparticles of size ranging from 40-60 nm. Biogenic AgNPs showed better DPPH radical scavenging activity with IC50 (13.44 ± 0.3) as compared to leaves extract with IC50 (10.57 ± 0.2). The synthesized AgNPs showed higher zones of inhibition (ZOI) by well diffusion method against Escherichia coli, Staphylococcus aureus and Klebsiella pneumoniae. Results of present study highlights the potential benefits of Eucalyptus globulus leaves extract-based AgNPs for various biomedical uses.

Association of SARS-CoV-2 infection with neurological impairments in pediatric population: A systematic review.

Neurological manifestations have been widely reported in adults with COVID-19, yet the extent of involvement among the pediatric population is currently poorly characterized. The objective of our systematic review is to evaluate the association of SARS-CoV-2 infection with neurological symptoms and neuroimaging manifestations in the pediatric population. A literature search of Cochrane Library; EBSCO CINAHL; Global Index Medicus; OVID AMED, Embase, Medline, PsychINFO; and Scopus was conducted in accordance with the Peer Review of Electronic Search Strategies form (October 1, 2019 to March 15, 2022). Studies were included if they reported (1) COVID-19-associated neurological symptoms and neuroimaging manifestations in individuals aged <18 years with a confirmed, first SARS-CoV-2 infection and were (2) peer-reviewed. Full-text reviews of 222 retrieved articles were performed, along with subsequent reference searches. A total of 843 no-duplicate records were retrieved. Of the 19 identified studies, there were ten retrospective observational studies, seven case series, one case report, and one prospective cohort study. A total of 6985 individuals were included, where 12.8% (n = 892) of hospitalized patients experienced neurocognitive impairments which includes: 1) neurological symptoms (n = 294 of 892, 33.0%), 2) neurological syndromes and neuroimaging abnormalities (n = 223 of 892, 25.0%), and 3) other phenomena (n = 233 of 892, 26.1%). Based on pediatric-specific cohorts, children experienced more drowsiness (7.3% vs. 1.3%) and muscle weakness (7.3% vs. 6.3%) as opposed to adolescents. Agitation or irritability was observed more in children (7.3%) than infants (1.3%). Our findings revealed a high prevalence of immune-mediated patterns of disease among COVID-19 positive pediatric patients with neurocognitive abnormalities.

Safety climate in Pakistani universities' laboratories: an assessment of individual factors.

Objectives. Current research aims to identify factors that affect the occupational safety climate in university laboratories despite their perception as low-risk areas compared to industrial environments. Methods. A safety climate survey was conducted in science laboratories across various engineering universities in Pakistan. The survey questionnaire was administered to 406 personnel, and a quantitative method for analysis was selected to examine the socio-demographic variables. A 5-point Likert scale (1 = strongly disagree to 5 = strongly agree) was used to perceive responses from participants. Additionally, a scale reliability test was conducted, and multivariate analysis of variance was performed to determine the relationship between selected dependent and independent variables. Results. The study found an overall safety climate score of 3.16 ± 0.55, indicating a moderate to high perception of safety on a scale of 1-5. Parameters such as role in the laboratory, departments/disciplines, accident experience and safety training significantly affected the safety climate score, while gender, age group, duration in university and accident witnessing did not. Conclusion. Upper management involvement, safety communication and direct supervision are crucial for improving the safety climate of university laboratories. The study recommends the consideration of the identified significant safety climate dimensions in laboratory safety policy-making at academic institutes.

Comparative multicenter analysis of sleeve gastrectomy, gastric bypass, and duodenal switch in patients with BMI ≥70kg/m2: a 2-year follow-up.

Patients undergoing metabolic and bariatric surgery (MBS) with body mass index (BMI) ≥ 70 kg/m2 are considered a high-risk group. There is limited literature to guide surgeons on the perioperative safety as well as the different procedural outcomes of MBS in this cohort. Our aim is to compare the safety profiles, early- and medium-term outcomes of sleeve gastrectomy (SG), Roux-en-Y gastric bypass (RYGB), and duodenal switch (DS) in patients with BMI ≥ 70 kg/m2. A total of 156 patients with BMI ≥ 70kg/m2 underwent MBS (SG = 40, RYGB = 40, and DS = 76). Mean baseline BMI was 75.5 kg/m2. Total weight loss (%TWL) at 24 months was highest in the DS group compared to RYGB (40.6% versus 33.8%, P value = .03) and SG (40.6% versus 28.5%, P value = .006). There was no significant difference in %TWL between RYGB and SG (33.8% versus 28.5%, P value = .20). The 30-day complication rates were similar [SG (7.5%), RYGB (10%), and DS (9.2%) (P value = 1.0)]. There was one reported leak (DS). The 30-day mortality was zero. MBS is safe and effective in patients with BMI ≥ 70 kg/m2. All procedures had comparable safety profiles and complication rates. While DS achieved the highest %TWL at 24 months, similar comorbidity resolution rates among the procedures attenuate its clinical significance.

Marginal Ulcer and Dumping Syndrome in Patients after Duodenal Switch: A Multi-Centered Study.

BACKGROUND: The current design of biliopancreatic diversion with duodenal switch (BPD/DS) and single anastomosis duodenal-ileal bypass with sleeve (SADI-S) emphasizes the importance of the pylorus' preservation to reduce the incidence of marginal ulcer (MU) and dumping. However, no institutional studies have yet reported data on their prevalence. We aimed to assess the incidence of MU and dumping after duodenal switch (DS) and identify the associative factors. METHODS: A multi-center review of patients who underwent BPD/DS or SADI-S between 2008 and 2022. Baseline demographics, symptoms, and management of both complications were collected. Fisher's exact test was used for categorical variables and the independent t-test for continuous variables. RESULTS: A total of 919 patients were included (74.6% female; age 42.5 years; BMI 54.6 kg/m2) with mean follow-up of 31.5 months. Eight patients (0.9%) developed MU and seven (0.8%) had dumping. Patients who developed MU were more likely to be using non-steroidal anti-inflammatory drugs (NSAID) (p = 0.006) and have a longer operation time (p = 0.047). Primary versus revisional surgery, and BDP/DS versus SADI-S were not associated with MU or dumping. CONCLUSIONS: The incidences of MU and dumping after DS were low. NSAID use and a longer operation time were associated with an increased risk of MU, whereas dumping was attributed to poor dietary habits.