A potential utilization of end-of-life tyres as recycled carbon black in EPDM rubber.

End-of-life (EOL) tyres and their decomposition present severe environmental concern due to their resistance to moisture, oxygen, natural degradation, etc. Pyrolysis is considered to be the most effective and sustainable process for recycling, due to its eco-friendly process. The current work studied the effect of recycled carbon black (rCB), obtained from the pyrolysis of EOL tyres, on the properties of ethylene propylene diene rubber (EPDM). The rCB was characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and chemical methods. rCB was incorporated solely, into a conventional EPDM formulation and also in combination with N550 carbon black. The physico-mechanical properties of the EPDM vulcanizates, before and after aging, were succinctly studied by SEM, TGA, Differential Scanning Calorimetry (DSC), tensile tests and cross-link density. The average particle size of rCB was observed to be 8 µm and the ash content was observed to be higher when compared to the conventional N550 carbon black, which was evident, by the TGA and SEM-EDX analyses. The reinforcing effect and the cross-link density of the rCB-filled vulcanizates were found to be marginally inferior in comparison to the conventional carbon black (N550). The morphology of the tensile- and tear-fractured surfaces were studied by SEM and it was observed that the breaking mechanism follows the rubber chain detachment from the surface mode.

Synthesis, characterization and the release kinetics of antiproliferative agents from polyamidoamine conjugates.

Polyamidoamine conjugates containing curcumin and bisphosphonate were synthesized via a one-pot aqueous phase Michael addition reaction. In the design of the conjugate, bisphosphonate formed an integral part of the polymer carrier backbone. Curcumin was incorporated onto the polyamidoamine backbone via piperazine linker. The conjugates were characterized by Fourier transform spectroscopy, energy-dispersive X-ray analysis, atomic force spectroscopy and nuclear magnetic resonance spectroscopy and it confirmed the successful incorporation of the antiproliferative agents onto the carriers. The weight percentage incorporation of bisphosphonate to the carriers was found to be between 2.56% and 3.34%. The in vitro release studies of curcumin from the polyamidoamine conjugate were performed in dialysis bag at selected pH values. The release of curcumin was significantly slower at pH 7.4 when compared to pH 5.8. The release profiles indicate that the conjugates are more stable at pH 7.4 and are potential sustained drug-delivery systems for combination therapy.

Influence of alkali metal cations on the thermal, mechanical and morphological properties of rectorite/chitosan bio-nanocomposite films.

The main theme of this work is to study the influence of ion-exchangeable alkali metal cations, such as: Li(+), Na(+), K(+), and Cs(+) on the thermal, mechanical and morphological properties. In this regard, a set of rectorite/chitosan (REC-CS) bio-nanocomposite films (BNCFs) was prepared by facile reaction of chitosan with ion-exchanged REC clay. The microstructure and morphology of BNCFs were investigated with XRD, TEM, SEM and AFM. Thermal and tensile properties of BNCFs were also investigated. As revealed from TEM and XRD results, the BNCFs featured a mixed morphology. Some intercalated clay sheets, together with nano-sized clay tactoids were obtained in LiREC/CS, NaREC/CS and KREC/CS of the BNCFs. From fractured surface study, via SEM, it was observed that the dispersion of chitosan polymer attaches to (and covers) the clay platelets. FTIR confirmed strong hydrogen bonds between clay and chitosan polymer. In addition, the thermal stabilities significantly varied when alkali metal cations varied from Li(+) to Cs(+). The BNCFs featured high tensile strengths (up to 84 MPa) and tensile moduli (up to 45 GPa). After evaluating these properties of BNCFs, we came to conclusion that these bio-nano composites can be used for packaging applications.

Structure and properties of highly toughened biodegradable polylactide/ZnO biocomposite films.

Zinc oxide (ZnO) powder was investigated in terms of its use as filler in order to improve the inherent properties of PLA. Biocomposite films of PLA with different loadings of ZnO were prepared by solution casting method. Morphological analyses using SEM and POM showed that the ZnO particles were well dispersed at low ZnO loading, with starfish-like morphology. However, ZnO agglomeration was found at higher ZnO loadings. Tensile testing showed improvements in strength and a moderate improvement in toughness at 2 wt% ZnO loading. This is consistent with the homogeneous dispersion of ZnO particles in the PLA matrix. ZnO particles incorporation improved the thermal stability of PLA. In summary, ZnO particles were shown to have the potential as a toughener in the preparation of biocomposites with better integrity, although other approaches, such as the use of compatibilizer in the surface modification of ZnO will be needed for the concurrent improvement of PLA properties.

Development of microbial resistant Carbopol nanocomposite hydrogels via a green process.

The present scientific research resulted in the development of novel microbial resistant inorganic nanocomposite hydrogels, which can be used as antibacterial agents. They are promising candidates for advanced antimicrobial applications in the field of biomedical science. Novel inorganic nanocomposite hydrogels were developed from Carbopol® 980 NF and acrylamide. Dual-metallic (Ag0-Au0) nanoparticles were prepared (via a green process) by the nucleation of silver and gold salts with mint leaf extract to form a hydrogel network. The Carbopol nanocomposite hydrogels contain (Ag0-Au0) nanoparticles ∼5 ± 3 nm in size, which was confirmed by transmission electron microscopy. The developed hydrogels were characterized using Fourier transform infrared (FTIR) spectroscopy, thermo-gravimetric analysis (TGA), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). The pure and inorganic nanocomposite hydrogels developed were tested against Bacillus and E. coli, for their antibacterial properties. The results indicate that the inorganic nanocomposites show significantly greater antimicrobial activity than the pure hydrogels. Therefore, novel microbial resistant Carbopol nanocomposite hydrogels can be used as potential candidates for antibacterial applications.

Preparation and characterization of nano-cellulose with new shape from different precursor.

Three different precursor materials - 1. China cotton, 2. South African cotton, 3. Waste tissue papers were used to produce nano-cellulose by acid hydrolysis route. No chemical pretreatment has been done for the production of nano-cellulose from these precursors. Prepared nano-cellulose and their corresponding precursor materials were characterized by transmission electron microscopy (TEM), particle size analysis, X-ray diffraction (XRD) study, thermo gravimetric analysis (TGA), differential scanning calorimetric (DSC) analysis and Fourier transformed infra red (FTIR) spectroscopy. A comparative study of the characteristics was done with the properties of raw materials and with that of nano-cellulose. Shape and size of the nano cellulose generally depends on nature of the precursor and hydrolysis condition. Morphology study of nano-cellulose from different sources revealed range of length from 50 to 200 nm and diameter from 10 to 90 nm. Higher thermal stability and crystallinity of nano-cellulose were observed compared to that of precursor from TGA/DSC study.

Structure and properties of poly (lactic acid)/Sterculia urens uniaxial fabric biocomposites.

Uniaxial cellulose fabric Sterculia urens reinforced poly (lactic acid) (PLA) matrix biocomposites were prepared by a two-roll mill. In order to assess the suitability of Sterculia fabric as reinforcement for PLA matrix, the PLA/Sterculia fabric biocomposites were prepared. Tensile parameters, such as maximum stress, Young's modulus and elongation-at-break, were determined using the Universal Testing Machine. The effect of alkali treatment and silane-coupling agent on the tensile properties of PLA-based biocomposites was studied. The results of thermogravimetric analysis show that uniaxial treatment of the fabric can improve the degradation temperature of the biocomposites. Moreover, morphological studies by scanning electron microscopy confirmed that better adhesion between the uniaxial fabric and the matrix was achieved. It was established that standard PLA resins are suitable for the manufacture of S. urens uniaxial fabric reinforced biocomposites with excellent engineering properties, useful for food packaging.

Preparation and properties of biodegradable films from Sterculia urens short fiber/cellulose green composites.

The development of commercially viable "green products", based on natural resources for the matrices and reinforcements, in a wide range of applications, is on the rise. The present paper focuses on Sterculia urens short fiber reinforced pure cellulose matrix composite films. The morphologies of the untreated and 5% NaOH (alkali) treated S. urens fibers were observed by SEM. The effect of 5% NaOH treated S. urens fiber (5, 10, 15 and 20% loading) on the mechanical properties and thermal stability of the composites films is discussed. This paper presents the developments made in the area of biodegradable S. urens short fiber/cellulose (SUSF/cellulose) composite films, buried in the soil and later investigated by the (POM), before and after biodegradation has taken place. SUSF/cellulose composite films have great potential in food packaging and for medical applications.