Three-Dimensional Topographic Surface Changes in Response to Volumization of the Lateral Suborbicularis Oculi Fat Compartment.

BACKGROUND: Autologous fat grafting is an increasingly preferred method for aesthetic facial rejuvenation. The authors' group previously described the concept of "lipotopography" as topographic surface changes that occur with fat grafting to discrete facial fat compartments. The purpose of this study was to define the "augmentation zone" of the lateral suborbicularis oculi fat compartment to understand the topographical surface changes following augmentation. METHODS: Nine cadaver hemifaces were injected with fat analogue at intervals from 1 to 4 cc. Three-dimensional photographs were taken at baseline and following each 1-cc incremental injection. The interval surface changes were calculated using three-dimensional software including perimeter, diameter, and projection. RESULTS: The augmentation zone of the lateral suborbicularis oculi fat compartment was characterized by a consistent shape and boundary. The shape was an elongated oval bound superiorly by the lid-cheek junction and inferiorly at the level of the zygomaticocutaneous ligament. Vertical and horizontal diameter and perimeter showed initial increases between 1 and 2 cc and then a plateau between 2 and 3 cc. Projection changes demonstrated an initial slow increase from 1 to 2 cc injection followed by nearly linear growth from 2 to 4 cc. CONCLUSIONS: Three-dimensional photography and computer analysis provide tools to understand the surface anatomy change in response to fat grafting specific facial fat compartments. Targeted volumization of the lateral suborbicularis oculi fat compartment also results in a unique surface change with consistent shape and anatomical boundaries. The lid-cheek junction and zygomaticocutaneous ligament were observed to restrict the expansion of fat analogue for all injection volumes. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

The Boomerang Lift: A Three-Step Compartment-Based Approach to the Youthful Cheek.

Autologous fat grafting is an important tool for plastic surgeons treating the aging face. Malar augmentation with fat is often targeted to restore the youthful facial contour and provides support to the lower eyelid. The existence of distinct facial fat compartments suggests that a stepwise approach may be appropriate in this regard. The authors describe a three-step approach to malar augmentation using targeted deep malar fat compartmental augmentation, termed the "boomerang lift." Clinical patients undergoing autologous fat grafting for malar augmentation were injected in three distinct deep malar fat compartments: the lateral sub-orbicularis oculi fat, the medial sub-orbicularis oculi fat, and the deep medial cheek (n = 9). Intraoperative three-dimensional images were taken at baseline and following compartmental injections (Canfield VECTRA H1). Images were overlaid between the augmented and baseline captures, and the three-dimensional surface changes were analyzed, which represented the resulting "augmentation zone." Three-dimensional analysis demonstrated a unique pattern for the augmentation zone consistent across patients. The augmentation zone resembled a boomerang, with the short tail supporting the medial lower lid and the long tail extending laterally along the zygomatic arch. The upper border was restricted by the level of the nasojugal interface, and the lower border was defined medially by the nasolabial fold and laterally by the level of the zygomaticocutaneous ligament. Lateral and medial sub-orbicularis oculi fat injections defined the boundaries of the boomerang shape, and injection to the deep medial cheek provided maximum projection. This is the first description of deep malar augmentation zones in clinical patients. Three-dimensional surface imaging was ideal for analyzing the surface change in response to targeted facial fat grafting. The authors' technique resulted in a reproducible surface shape, which they term the boomerang lift.

How Well Do They Convert? Trending ASAPS Presentations to Publication From 1995-2010.

BACKGROUND: The American Society for Aesthetic Plastic Surgery (ASAPS) sponsors an annual conference that promotes education, advocacy, and care. There, researchers deliver abstracts as podium and poster presentations. Subsequently, ASAPS encourages submitting these research findings for publication. Yet, many never become published manuscripts. OBJECTIVES: To quantify the conversion rates of oral abstract presentations to publication from 1995 to 2010. Secondary objectives included evaluating trends in presentations, publications, time to publication, and published journal distribution. METHODS: Comprehensive literature search in PubMed cross-referencing oral abstract presentations and determining peer-reviewed publication status. The conversion rate and time to publication was calculated. RESULTS: A total of 569 oral presentations met the inclusion criteria. The mean annual presentations was 35.6. A total of 360 presentations became journal publications. The mean annual publications was 22.5. The mean conversion rate was 63.3% (R2, 0.1271; P-value of .23). The mean time to publication was 19.8 months. Most publications occurred within two years of presentation (87.5%). Publications appeared in Plastic and Reconstructive Surgery (PRS, 48.6%), Aesthetic Surgery Journal (ASJ, 27.8%), Aesthetic Plastic Surgery (APS, 5.6%), Annals of Plastic Surgery (AnnPS, 4.2%), Clinics in Plastic Surgery (CPS, 3.9%), and other journals (10%). Trending ASJ publications vs other journals in five year intervals demonstrated an increase from 18.7% to 58.8%. CONCLUSIONS: While the number of presentations and publications declined, the time to publication, and conversion rate remained largely the same. Despite its short existence, ASJ became the predominant journal publishing ASAPS abstracts by the end of the study period.

"No-Touch" Technique for Lip Enhancement.

BACKGROUND: The purpose of this study was to examine the anatomical principles of lip structure as they relate to individualized lip enhancement procedures and to describe a technique that does not violate lip mucosa during injection. METHODS: A retrospective analysis of patients undergoing lip enhancement procedures between 2001 and 2014 was performed. Preprocedural and postprocedural photographs were analyzed for lip subunit changes. A stepwise treatment algorithm targeting specific anatomical subunits of lip is described. RESULTS: Four hundred ten patients were treated with a "no-touch" technique for lip enhancement. Lip profile is determined by the position of the white roll. The white roll is accessed by a 30-gauge needle at a point 5 mm lateral to the oral commissure and at the base of the philtral columns. Lip projection is established by vermilion formation contributing to the arc of the Cupid's bow. To improve projection, the labial commissure is entered with a 25-gauge cannula and tunneled into the submucosal space between the white and red rolls. Lip augmentation is a direct reflection of the prominence of the red line and can be approached in a perpendicular fashion with a needle or cannula descending to the level of the wet-dry junction. CONCLUSIONS: Accurate assessment of the white and red rolls, arc of Cupid's bow, philtrum, and gingival show can guide the injector on the proper enhancement that individual patients require. The no-touch technique minimizes mucosal trauma. Tailoring treatment toward lip profile, projection, and/or augmentation can yield predictable and reproducible outcomes in this commonly performed cosmetic procedure.

Three-Dimensional Topographic Surface Changes in Response to Compartmental Volumization of the Medial Cheek: Defining a Malar Augmentation Zone.

BACKGROUND: Given the widespread use of facial fillers and recent identification of distinct facial fat compartments, a better understanding of three-dimensional surface changes in response to volume augmentation is needed. Advances in three-dimensional imaging technology now afford an opportunity to elucidate these morphologic changes for the first time. METHODS: A cadaver study was undertaken in which volumization of the deep medial cheek compartment was performed at intervals up to 4 cc (n = 4). Three-dimensional photographs were taken after each injection to analyze the topographic surface changes, which the authors define as the "augmentation zone." Perimeter, diameter, and projection were studied. The arcus marginalis of the inferior orbit consistently represented a fixed boundary of the augmentation zone, and additional cadavers underwent similar volumization following surgical release of this portion of the arcus marginalis (n = 4). Repeated three-dimensional computer analysis was performed comparing the augmentation zone with and without arcus marginalis release. RESULTS: Volumization of the deep medial cheek led to unique topographic changes of the malar region defined by distinct boundaries. Interestingly, the cephalic border of the augmentation zone was consistently noted to be at the level of the arcus marginalis in all specimens. When surgical release of the arcus marginalis was performed, the cephalic border of the augmentation zone was no longer restricted. CONCLUSIONS: Using advances in three-dimensional photography and computer analysis, the authors demonstrate characteristic surface anatomy changes in response to volume augmentation of facial compartments. This novel concept of the augmentation zone can be applied to volumization of other distinct facial regions. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

A Retrospective Review of Patients Undergoing Lateral Canthoplasty Techniques to Manage Existing or Potential Lower Eyelid Malposition: Identification of Seven Key Preoperative Findings.

BACKGROUND: Lateral canthal procedures are often indicated to correct or prevent lower eyelid malposition. When determining an appropriate lateral canthal procedure, planning is essential and includes proper analysis and identification of any contributory anatomical factors. METHODS: A 12-month retrospective review was performed on patients undergoing lateral canthal procedures. Important components of the preoperative examination were studied to relate patient anatomy and results. Outcomes were followed for a minimum of 5 years. RESULTS: Of 288 consecutive lower eyelid canthal procedures, a total of 146 met the inclusion criteria. Common designated abnormal preoperative findings included a negative vector (62 percent), lid margin eversion (12 percent), scleral show (21 percent), neutral or negative canthal tilt (49 percent and 18 percent, respectively), and lateral canthus -to -orbital rim distance of more than 1 cm (11 percent). The distribution of lateral canthal procedures performed in our study population included inferior retinacular lateral canthopexy (n = 36), inferior retinacular lateral canthoplasty (n = 88), tarsal strip lateral canthoplasty (n = 15), and dermal-orbicular pennant lateral canthoplasty (n = 7). Successful outcomes were noted to be 86 percent and 91 percent according to surgeons and patients, respectively. CONCLUSIONS: Specific findings on the preoperative physical examination identify when simple or more complex lateral canthal procedures should be performed. The authors report seven key physical findings that should be documented to effectively determine a lateral canthal procedure that is appropriate for prevention and management of lower eyelid malposition. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Pertinent anatomy and analysis for midface volumizing procedures.

BACKGROUND: The study was conducted to construct an anatomically inspired midfacial analysis facilitating safe, accurate, and dynamic nonsurgical rejuvenation. Emphasis is placed on determining injection target areas and adverse event zones. METHODS: Twelve hemifacial fresh cadavers were dissected in a layered fashion. Dimensional measurements between the midfacial fat compartments, prezygomatic space, mimetic muscles, and neurovascular bundles were used to develop a topographic analysis for clinical injections. RESULTS: A longitudinal line from the base of the alar crease to the medial edge of the levator anguli oris muscle (1.9 cm), lateral edge of the levator anguli oris muscle (2.6 cm), and zygomaticus major muscle (4.6 cm) partitions the cheek into two aesthetic regions. A six-step facial analysis outlines three target zones and two adverse event zones and triangulates the point of maximum cheek projection. The lower adverse event zone yields an anatomical explanation to inadvertent jowling during anterior cheek injection. The upper adverse event zone localizes the palpebral branch of the infraorbital artery. The medial malar target area isolates quadrants for anterior cheek projection and tear trough effacement. The middle malar target area addresses lid-cheek blending and superficial compartment turgor. The lateral malar target area highlights lateral cheek projection and locates the prezygomatic space. CONCLUSIONS: This stepwise analysis illustrates target areas and adverse event zones to achieve midfacial support, contour, and profile in the repose position and simultaneous molding of a natural shape during animation. This reproducible method can be used both procedurally and in record-keeping for midface volumizing procedures.

Volumizing viaducts of the midface: defining the Beut techniques.

BACKGROUND: In nonsurgical facial rejuvenation, autologous fat and dermal fillers have become an effective method to achieve symmetry and balance of the midface. Nonsurgical techniques that target the dynamic anatomical relationships existing in the midface can improve rejuvenation outcomes in this commonly augmented region. OBJECTIVES: The authors described techniques for fat compartment and potential space volumization of the midface via a standardized and reproducible technique. They placed emphasis on access to anatomical spaces and compartments within the midface. METHODS: In 11 hemifacial cadavers, hyaluronic acid filler homogenized with red dye was injected via 3 midfacial ports that were anatomically designed to access the superficial fat compartments, deep fat compartments, or traverse the prezygomatic space. Specimens were dissected in a layered fashion to analyze relationships between the injected filler and midfacial anatomy. We have described 4 site-specific procedural techniques and created a video containing anatomical renderings of each targeted viaduct accompanied by technique demonstrations. RESULTS: We found that Beut techniques 1 through 4 can be performed through 3 midfacial viaducts. Port placement 1.5 cm inferolateral to the alar base in the nasolabial crease created a medial midface viaduct, suitable for access to the deep medial cheek fat, medial superficial fat compartment, premaxillary space, and adjacent superior nasolabial cheek compartment. Port placement within the nasojugal groove provided a middle midface viaduct to access the middle superficial fat compartment and medial suborbicularis oculi fat (SOOF). Port placement 1.5 cm inferolateral to the lateral canthus created a lateral midface viaduct to approach the pre-periosteal fat, prezygomatic space, lateral SOOF, and infraorbital fat compartment. CONCLUSIONS: Our findings indicate that anterior and lateral cheek projection, V-deformity correction, rhytid softening, and tear trough effacement can be achieved through the midfacial viaducts. Systematic assessment and site-specific nonsurgical rejuvenation of the midface may lead to increased safety, accuracy, and technique reproducibility in this commonly injected region.

Medial canthal reconstruction using a medially based upper eyelid myocutaneous flap.

Periorbital reconstruction following skin cancer ablation represents a challenging problem. A thorough understanding of the complex periorbital anatomy is necessary to preserve lid function and protect the ocular surface. The medial canthal region represents the most difficult periorbital zone to reconstruct. This area has a complex anatomy involving both the medial canthus itself and the lacrimal apparatus. The authors present their experience with a versatile technique for reconstruction of the medial canthal periorbital region, namely, a medially based upper eyelid myocutaneous flap. In the 10 patients in whom this procedure was used, there was one partial and no complete flap losses. The authors believe that the medially based upper lid myocutaneous flap offers an excellent solution to the difficult problem of medial canthal periorbital reconstruction.