Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 9 de 9
Filter
Add more filters










Database
Language
Publication year range
1.
Sci Rep ; 9(1): 16109, 2019 11 06.
Article in English | MEDLINE | ID: mdl-31695087

ABSTRACT

The fluctuation of domestic wastewater characteristic inhibits the current conventional microbial-based treatment. The bioremediation fungi has received attention and reported to be an effective alternative to treat industrial wastewater. Similar efficient performance is envisaged for domestic wastewater whereby assessed performance of fungi for varying carbon-to-nitrogen ratios in domestic wastewater is crucial. Thus, the performance of pre-grown wild-Serbian Ganoderma lucidum mycelial pellets (GLMPs) was evaluated on four different synthetic domestic wastewaters under different conditions of initial pH (pH 4, 5, and 7) and chemical oxygen demand (COD) to nitrogen (COD/N) ratio of 3.6:1, 7.1:1, 14.2:1, and 17.8:1 (C3.6N1, C7.1N1, C14.2N1, and C17.8N1). The COD/N ratios with a constant concentration of ammonia-nitrogen (NH3-N) were chosen on the basis of the urban domestic wastewater characteristics sampled at the inlet basin of a sewage treatment plant (STP). The parameters of pH, COD, and NH3-N were measured periodically during the experiment. The wild-Serbian GLMPs efficiently removed the pollutants from the synthetic sewage. The COD/N ratio of C17.8N1 wastewater had the best COD and NH3-N removal, as compared to the lower COD/N ratio, and the shortest treatment time was obtained in an acidic environment at pH 4. The highest percentage for COD and NH3-N removal achieved was 96.0% and 93.2%, respectively. The results proved that the mycelium of GLMP has high potential in treating domestic wastewater, particularly at high organic content as a naturally sustainable bioremediation system.


Subject(s)
Mycelium/metabolism , Reishi/growth & development , Sewage/microbiology , Water Purification/methods , Ammonia/analysis , Ammonia/metabolism , Biodegradation, Environmental , Bioreactors/microbiology , Mycelium/growth & development , Nitrogen/analysis , Nitrogen/metabolism , Oxygen/analysis , Oxygen/metabolism , Reishi/metabolism , Sewage/chemistry , Water Purification/instrumentation
2.
Water Environ Res ; 88(8): 747-55, 2016 Aug.
Article in English | MEDLINE | ID: mdl-27456145

ABSTRACT

The present study focuses on anaerobic organic matter transformation processes in force mains for the purpose of improving existing sewer process models. Wastewater samples were obtained at 100 m intervals from a 1 km long pilot scale force main and measured for several wastewater parameters. Transformation rates for selected parameters were calculated and their spatial variability analyzed. In terms of electron transfer, fermentation was the most significant process, resulting in a net volatile fatty acid formation of 0.83 mmol/L. Sulfate reduction resulted in a production of 0.73 mmol/L of inorganic sulfide. Methanogenesis was negligable in all experiments despite an anaerobic residence time of more than 30 hours. As a result of the anaerobic processes, the wastewater pH decreased by approximately one pH unit, resulting in a corresponding increase in the fraction of molecular hydrogen sulfide. A significant spatial variablilty was observed for the average transformation rates of all parameters.


Subject(s)
Bacteria, Anaerobic/metabolism , Fermentation , Wastewater/microbiology , Biotransformation , Carbon/metabolism , Hydrogen-Ion Concentration , Methane/metabolism , Organic Chemicals/metabolism , Sewage , Sulfates/metabolism , Wastewater/analysis
3.
Microbiologyopen ; 5(4): 616-25, 2016 08.
Article in English | MEDLINE | ID: mdl-27063341

ABSTRACT

This study describes the temporal and spatial variability of bacterial communities within a combined sewer system in England. Sampling was conducted over 9 months in a sewer system with intensive monitoring of hydraulic conditions. The bacterial communities were characterized by 16S rRNA gene-targeted terminal restriction fragment length polymorphism analysis. These data were related to the hydraulic data as well as the sample type, location, and time. Temporal and spatial variation was observed between and within wastewater communities and biofilm communities. The bacterial communities in biofilm were distinctly different from the communities in wastewater and exhibited greater spatial variation, while the wastewater communities exhibited variability between different months of sampling. This study highlights the variation of bacterial communities between biofilm and wastewater, and has shown both spatial and temporal variations in bacterial communities in combined sewers. The temporal variation is of interest for in-sewer processes, for example, sewer odor generation, as field measurements for these processes are often carried out over short durations and may therefore not capture the influence of this temporal variation of the bacterial communities.


Subject(s)
Bacteria/classification , Bacteria/genetics , Microbiota/genetics , Sewage/microbiology , Biofilms , England , Polymorphism, Restriction Fragment Length , RNA, Ribosomal, 16S/genetics , Water Microbiology
4.
J Hazard Mater ; 189(3): 685-91, 2011 May 30.
Article in English | MEDLINE | ID: mdl-21440988

ABSTRACT

Hydrogen sulfide oxidation by microbes present on concrete surfaces of sewer pipes is a key process in sewer corrosion. The growth of aerobic sulfur oxidizing bacteria from corroded concrete surfaces was studied in a batch reactor. Samples of corrosion products, containing sulfur oxidizing bacteria, were suspended in aqueous solution at pH similar to that of corroded concrete. Hydrogen sulfide was supplied to the reactor to provide the source of reduced sulfur. The removal of hydrogen sulfide and oxygen was monitored. The utilization rates of both hydrogen sulfide and oxygen suggested exponential bacterial growth with median growth rates of 1.25 d(-1) and 1.33 d(-1) as determined from the utilization rates of hydrogen sulfide and oxygen, respectively. Elemental sulfur was found to be the immediate product of the hydrogen sulfide oxidation. When exponential growth had been achieved, the addition of hydrogen sulfide was terminated leading to elemental sulfur oxidation. The ratio of consumed sulfur to consumed oxygen suggested that sulfuric acid was the ultimate oxidation product. To the knowledge of the authors, this is the first study to determine the growth rate of bacteria involved in concrete corrosion with hydrogen sulfide as source of reduced sulfur.


Subject(s)
Bacteria/metabolism , Construction Materials , Hydrogen Sulfide/chemistry , Oxygen/chemistry , Sewage/microbiology , Acidithiobacillus , Corrosion , Hydrogen-Ion Concentration , Kinetics , Models, Chemical , Sulfur/chemistry , Sulfuric Acids/chemistry , Time Factors , Waste Disposal, Fluid
5.
Water Environ Res ; 81(4): 365-73, 2009 Apr.
Article in English | MEDLINE | ID: mdl-19445325

ABSTRACT

Abiotic and biotic oxidation of hydrogen sulfide related to concrete corrosion was studied in corrosion products originating from a sewer manhole. The concrete corrosion products were suspended in an acidic solution, mimicking the conditions in the pore water of corroded concrete. The removal of hydrogen sulfide and dissolved oxygen was measured in parallel in the suspension, upon which the suspension was sterilized and the measurement repeated. The results revealed the biotic oxidation to be fast compared with the abiotic oxidation. The stoichiometry of the hydrogen sulfide oxidation was evaluated using the ratio between oxygen and hydrogen sulfide uptake. The ratio for the biotic oxidation pointed in the direction of elemental sulfur being formed as an intermediate in the oxidation of hydrogen sulfide to sulfuric acid. The experimental results were applied to suggest a hypothesis and a mathematical model describing the hydrogen sulfide oxidation pathway in a matrix of corroded concrete.


Subject(s)
Construction Materials , Corrosion , Hydrogen Sulfide/chemistry , Models, Theoretical , Oxidation-Reduction
6.
Water Res ; 42(15): 4206-14, 2008 Sep.
Article in English | MEDLINE | ID: mdl-18723203

ABSTRACT

Hydrogen sulfide oxidation on sewer pipe surfaces was investigated in a pilot scale experimental setup. The experiments were aimed at replicating conditions in a gravity sewer located immediately downstream of a force main where sulfide related concrete corrosion and odor is often observed. During the experiments, hydrogen sulfide gas was injected intermittently into the headspace of partially filled concrete and plastic (PVC and HDPE) sewer pipes in concentrations of approximately 1,000 ppm(v). Between each injection, the hydrogen sulfide concentration was monitored while it decreased because of adsorption and subsequent oxidation on the pipe surfaces. The experiments showed that the rate of hydrogen sulfide oxidation was approximately two orders of magnitude faster on the concrete pipe surfaces than on the plastic pipe surfaces. Removal of the layer of reaction (corrosion) products from the concrete pipes was found to reduce the rate of hydrogen sulfide oxidation significantly. However, the rate of sulfide oxidation was restored to its background level within 10-20 days. A similar treatment had no observable effect on hydrogen sulfide removal in the plastic pipe reactors. The experimental results were used to model hydrogen sulfide oxidation under field conditions. This showed that the gas-phase hydrogen sulfide concentration in concrete sewers would typically amount to a few percent of the equilibrium concentration calculated from Henry's law. In the plastic pipe sewers, significantly higher concentrations were predicted because of the slower adsorption and oxidation kinetics on such surfaces.


Subject(s)
Hydrogen Sulfide/chemistry , Odorants , Sewage/chemistry , Construction Materials , Corrosion , Oxidation-Reduction , Pilot Projects , Plastics/chemistry , Waste Disposal, Fluid/instrumentation
7.
Water Environ Res ; 80(2): 118-26, 2008 Feb.
Article in English | MEDLINE | ID: mdl-18330221

ABSTRACT

A conceptual model that simulates the formation and fate of odorous substances in branched collection systems is presented. The model predicts the activity of the relevant biomass phenotypes under aerobic, anoxic, and anaerobic conditions in force mains and gravity sewers. The formation and fate of individual, malodorous substances in the bulk water, biofilms, and sediments are modeled. The release of odorous compounds from the bulk water to the sewer gas phase, their fate in the gas phase, and their subsequent release into the urban atmosphere is simulated. Examples of model application include the prediction of hydrogen sulfide and malodorous fermentation products from force mains and gravity sewers.


Subject(s)
Hydrogen Sulfide/analysis , Models, Biological , Odorants/analysis , Sewage/chemistry , Waste Disposal, Fluid/methods , Aerobiosis , Anaerobiosis , Biofilms , Biomass , Computer Simulation , Geologic Sediments/analysis , Hydrogen Sulfide/metabolism , Mathematics , Oxidation-Reduction , Oxygen/metabolism , Water/analysis
8.
Water Environ Res ; 80(1): 16-25, 2008 Jan.
Article in English | MEDLINE | ID: mdl-18254394

ABSTRACT

The formation and fate of sulfide in a force main and a downstream-located gravity sewer were investigated in an extensive field study. Sulfide formation in the force main was significant. However, during 14 minutes of transport in the gravity sewer, the sulfide concentration decreased 30%, on average. An application of a conceptual sewer process model for simulating the formation and fate of sulfide was demonstrated. Overall, the model predicted that approximately 90% of the decrease of the sulfide concentration in the gravity sewer was the result of sulfide oxidation and that only a small fraction entered the sewer atmosphere, causing odor and corrosion. Even so, the model predicted concrete corrosion rates of up to 1.2 mm/y in the gravity sewer section.


Subject(s)
Aerobiosis , Anaerobiosis , Sulfides/metabolism , Waste Disposal, Fluid , Computer Simulation , Corrosion , Denmark , Models, Biological , Oxygen/analysis , Water Movements
9.
Sci Total Environ ; 394(1): 162-70, 2008 May 01.
Article in English | MEDLINE | ID: mdl-18281080

ABSTRACT

Hydrogen sulfide absorption and oxidation by corroding concrete surfaces was quantified in a test rig consisting of 6 concrete pipes operated under sewer conditions. The test rig was placed in an underground sewer monitoring station with access to fresh wastewater. Hydrogen sulfide gas was injected into the pipe every 2nd hour to peak concentrations around 1000 ppm. After some months of operation, the hydrogen sulfide became rapidly oxidized by the corroding concrete surfaces. At hydrogen sulfide concentrations of 1000 ppm, oxidation rates as high as 1 mg S m(-2) s(-1) were observed. The oxidation process followed simple nth order kinetics with a process order of 0.45-0.75. Extrapolating the results to gravity sewer systems showed that hydrogen sulfide oxidation by corroding concrete is a fast process compared to the release of hydrogen sulfide from the bulk water, resulting in low gas concentrations compared with equilibrium. Balancing hydrogen sulfide release with hydrogen sulfide oxidation at steady state conditions demonstrated that significant corrosion rates--several millimeters of concrete per year--can potentially occur at hydrogen sulfide gas phase concentrations well below 5-10 ppm. The results obtained in the study advances the knowledge on prediction of sewer concrete corrosion and the extent of odor problems.

SELECTION OF CITATIONS
SEARCH DETAIL
...