Distributed representations of prediction error signals across the cortical hierarchy are synergistic.

A relevant question concerning inter-areal communication in the cortex is whether these interactions are synergistic. Synergy refers to the complementary effect of multiple brain signals conveying more information than the sum of each isolated signal. Redundancy, on the other hand, refers to the common information shared between brain signals. Here, we dissociated cortical interactions encoding complementary information (synergy) from those sharing common information (redundancy) during prediction error (PE) processing. We analyzed auditory and frontal electrocorticography (ECoG) signals in five common awake marmosets performing two distinct auditory oddball tasks and investigated to what extent event-related potentials (ERP) and broadband (BB) dynamics encoded synergistic and redundant information about PE processing. The information conveyed by ERPs and BB signals was synergistic even at lower stages of the hierarchy in the auditory cortex and between auditory and frontal regions. Using a brain-constrained neural network, we simulated the synergy and redundancy observed in the experimental results and demonstrated that the emergence of synergy between auditory and frontal regions requires the presence of strong, long-distance, feedback, and feedforward connections. These results indicate that distributed representations of PE signals across the cortical hierarchy can be highly synergistic.

Functional Mapping of Movement and Speech Using Task-Based Electrophysiological Changes in Stereoelectroencephalography.

Introduction: Stereoelectroencephalography (sEEG) has become the predominant method for intracranial seizure localization. When imaging, semiology, and scalp EEG are not in full agreement or definitively localizing, implanted sEEG recordings are used to test candidate seizure onset zones (SOZs). Discovered SOZs may then be targeted for resection, laser ablation, or neurostimulation. If a SOZ is eloquent, resection and ablation are both contraindicated, so identifying functional representation is crucial for therapeutic decision making. Objective: We present a novel functional brain mapping technique that utilizes task-based electrophysiological changes in sEEG during behavioral tasks and test this in pediatric and adult patients. Methods: sEEG was recorded in twenty patients with epilepsy, aged 6-39 (12 female, 18 of 20 patients < 21 years old), who underwent implanted monitoring to identify seizure onset. Each performed 1) visually cued simple repetitive movements of the hand, foot, or tongue while electromyography was recorded, and 2) simple picture naming or verb generation speech tasks while audio was recorded. Broadband changes in the power spectrum of the sEEG were compared between behavior and rest. Results: Electrophysiological functional mapping of movement and/or speech areas was completed in all 20 patients. Eloquent representation was identified in both cortex and white matter, and generally corresponded to classically described functional anatomic organization as well as other clinical mapping results. Robust maps of brain activity were identified in healthy brain, regions of developmental or acquired structural abnormality, and SOZs. Conclusion: Task based electrophysiological mapping using broadband changes in the sEEG signal reliably identifies movement and speech representation in pediatric and adult epilepsy patients.

Spectral tweezers: Single sample spectroscopy using optoelectronic tweezers.

A scheme that combines optoelectronic tweezers (OET) with spectroscopic analysis is presented. Referred to as spectral tweezers, the approach uses a single focused light beam that acts both as the trapping beam for OET and the probe beam for spectroscopy. Having simultaneous manipulation and spectral characterization ability, the method is used to isolate single micro-samples from clusters and perform spectral measurements. Experimental results show that a characteristic spectral signature can be obtained for a given sample. The proposed approach can be easily integrated into the optical setups used for conventional OETs with only a few additional optical components, making it a convenient tool for bio-analytical applications.

Resolution improvement of optoelectronic tweezers using patterned electrodes.

An optoelectronic tweezer (OET) device is presented that exhibits improved trapping resolution for a given optical spot size. The scheme utilizes a pair of patterned physical electrodes to produce an asymmetric electric field gradient. This, in turn, generates an azimuthal force component in addition to the conventional radial gradient force. Stable force equilibrium is achieved along a pair of antipodal points around the optical beam. Unlike conventional OETs where trapping can occur at any point around the beam perimeter, the proposed scheme improves the resolution by limiting trapping to two points. The working principle is analyzed by performing numerical analysis of the electromagnetic fields and corresponding forces. Experimental results are presented that show the trapping and manipulation of micro-particles using the proposed device.

Preliminary Experience with a Four-Lead Implantable Pulse Generator for Deep Brain Stimulation.

BACKGROUND: Implantable pulse generators (IPGs) store energy and deliver electrical impulses for deep brain stimulation (DBS) to treat neurological and psychiatric disorders. IPGs have evolved over time to meet the demands of expanding clinical indications and more nuanced therapeutic approaches. OBJECTIVES: The aim of this study was to examine the workflow of the first 4-lead IPG for DBS in patients with complex disease. METHOD: The engineering capabilities, clinical use cases, and surgical technique are described in a cohort of 12 patients with epilepsy, essential tremor, Parkinson's disease, mixed tremor, and Tourette's syndrome with comorbid obsessive-compulsive disorder between July 2021 and July 2022. RESULTS: This system is a rechargeable 32-channel, 4-port system with independent current control that can be connected to 8 contact linear or directionally segmented leads. The system is ideal for patients with mixed disease or those with multiple severe symptoms amenable to >2 lead implantations. A multidisciplinary team including neurologists, radiologists, and neurosurgeons is necessary to safely plan the procedure. There were no serious intraoperative or postoperative adverse events. One patient required revision surgery for bowstringing. CONCLUSIONS: This new 4-lead IPG represents an important new tool for DBS surgery with the ability to expand lead implantation paradigms for patients with complex disease.

A motor association area in the depths of the central sulcus.

Cells in the precentral gyrus directly send signals to the periphery to generate movement and are principally organized as a topological map of the body. We find that movement-induced electrophysiological responses from depth electrodes extend this map three-dimensionally throughout the gyrus. Unexpectedly, this organization is interrupted by a previously undescribed motor association area in the depths of the midlateral aspect of the central sulcus. This 'Rolandic motor association' (RMA) area is active during movements of different body parts from both sides of the body and may be important for coordinating complex behaviors.

The LazyBox Educational Intervention Trial: Can Longitudinal Practice on a Low-Fidelity Microsurgery Simulator Improve Microsurgical Skills?

Introduction Every surgical trainee must acquire microsurgical skills within a limited timeframe. Therefore, identifying effective educational strategies to help learners attain these skills is crucial. Objective Establish the effectiveness of a low-fidelity microsurgery simulator to improve the execution and one's perception of the difficulty of basic surgical techniques. Methods From 2021 to 2022, 24 medical students were randomized to either (1) a treatment group (n=12) that engaged in longitudinal practice on a low-fidelity microsurgery simulator (the LazyBox) or (2) a control group (n=12) that did not practice. Students performed vessel loop ligation, catheter macroanastomosis, and synthetic vessel microanastomosis prior to and six weeks after intervention. Both objective metrics and subjective metrics (Swedish Occupational Fatigue Inventory (SOFI) and Surgery Task Load Index (SURG-TLX)) were obtained. Results The treatment and control arms had 1.2 (SD = 2.6) and 2.1 (SD = 2.4) points increase in the vessel loop ligation, respectively (p = 0.39). The treatment and control arms had a 3.4 (SD = 4.1) and 2.9 (SD = 3.6) points increase in the macroanastomosis task, respectively (p = 0.74). In the synthetic vessel microanastomosis task training, the experimental and control arms showed a 5.4 (SD = 8.3) and a 2.9 (SD = 5.6) points increase, respectively (p = 0.30). No differences were found between the groups regarding survey metrics of mental (p = 0.82), temporal (p = 0.23), and physical demands (p = 0.48). Conclusion In our randomized educational intervention, we found no significant difference in objective and subjective metrics of microsurgical task performance between learners who did and did not use the LazyBox simulator.

The Early Bird Gets the Worm: Introducing Medical Students to Microsurgical Technique via a Low-Cost, User-Friendly, Reusable Simulation System.

BACKGROUND: Mastery of microsurgical technique requires thousands of hours of deliberate practice, often with equipment that is not accessible to medical students. This study aimed to develop, test, and report a novel simulation system for providing medical students with early access to microsurgical technique. METHODS: Low-cost, user-friendly, reusable microsurgery kits were iteratively developed using excess surgical supplies, such as catheter tubing and vessel loops. Students were tested on 2 separate tasks, with grading via a standardized performance scale incorporating aspects of alignment, leak, and anastomotic patency. RESULTS: Twelve medical students were tested on standardized microsurgery kits at 2 different time points 6 weeks apart with no additional training received in between. Median change in total score on the vessel loop suturing task after 6 weeks was +2.6 points (range, -1.7 to +5 points); median change in completion time was -1.9 minutes (range, -3.5 to +2.7 minutes). Median change in total score on the red rubber anastomosis task was +5.8 points (range, -2.6 to +9.6 points) with a median improvement of -4.3 minutes (range, -9.6 to +2.6 minutes). CONCLUSIONS: Reusable microsurgery kits designed with excess surgical supplies are educationally impactful tools that introduce medical students to microsurgical techniques early in their training, while also providing objective measures for skills acquisition over time.

Age-dependent cognitive impairment, hydrocephalus and leukocyte infiltration in transgenic mice with endothelial expression of human EPHX2.

Soluble epoxide hydrolase (sEH) is upregulated in microvascular endothelium of human brain with vascular cognitive impairment (VCI). Transgenic endothelial expression of human sEH in mice (Tie2hsEH) induces endothelial dysfunction (ED), a pathogenetic mechanism of VCI. We sought to determine if endothelial upregulation of sEH is sufficient to cause cognitive impairment, and if cognitive impairment due to chronic hypoperfusion induced by unilateral common carotid artery occlusion (CCAO) is exacerbated in Tie2hsEH mice. Behavioral performance was assessed by the open field, rotarod, novel object, Morris water maze and fear conditioning tests. Cerebral blood flow and brain morphology were evaluated by MRI, and inflammatory changes investigated using immunohistochemistry and flow cytometry. We demonstrate that transgenic endothelial expression of sEH is sufficient to induce cognitive impairment, associated with leukocyte infiltration, brain atrophy and accelerated, age-dependent ventriculomegaly, identifying ED and sEH upregulation as potential underlying mechanisms and therapeutic targets for VCI.

Modeling Brownian Microparticle Trajectories in Lab-on-a-Chip Devices with Time Varying Dielectrophoretic or Optical Forces.

Lab-on-a-chip (LOC) devices capable of manipulating micro/nano-sized samples have spurred advances in biotechnology and chemistry. Designing and analyzing new and more advanced LOCs require accurate modeling and simulation of sample/particle dynamics inside such devices. In this work, we present a generalized computational physics model to simulate particle/sample trajectories under the influence of dielectrophoretic or optical forces inside LOC devices. The model takes into account time varying applied forces, Brownian motion, fluid flow, collision mechanics, and hindered diffusion caused by hydrodynamic interactions. We develop a numerical solver incorporating the aforementioned physics and use it to simulate two example cases: first, an optical trapping experiment, and second, a dielectrophoretic cell sorter device. In both cases, the numerical results are found to be consistent with experimental observations, thus proving the generality of the model. The numerical solver can simulate time evolution of the positions and velocities of an arbitrarily large number of particles simultaneously. This allows us to characterize and optimize a wide range of LOCs. The developed numerical solver is made freely available through a GitHub repository so that researchers can use it to develop and simulate new designs.

Hammock Mitral Valve Repair in Infancy: Operative Steps Toward a Customized Reconstruction After Preoperative Planning.

Hammock mitral valve (MV) repair is historically technically difficult with a guarded prognosis. Surgical experience is extremely limited and variable outcomes are reported. The perioperative strategy and technical details of hammock MV repair in an infant who presented with severe mitral stenosis are described and review of the existing literature was undertaken.

Community members in activated sludge as determined by molecular probe technology.

The use of molecular probe technology is demonstrated for routine identification and tracking of cultured and uncultured microorganisms in an activated sludge bioreactor treating domestic wastewater. A key advantage of molecular probe technology is that it can interrogate hundreds of microbial species of interest in a single measurement. In environmental niches where a single genus (such as Competibacteraceae) dominates, it can be difficult and expensive to identify microorganisms that are present at low relative abundance. With molecular probe technology, it is straightforward. Members of the Competibacteraceae family, none of which have been grown in pure culture, are abundant in an activated sludge system in the San Francisco Bay Area, California, USA. Molecular probe ensembles with and without Competibacteraceae probes were constructed. Whereas the probe ensemble with Competibacteraceae probes identified a total of ten bacteria, the molecular probe ensemble without Competibacteraceae probes identified 29 bacteria, including many at low relative abundance and including some species of public health significance.

Template-Independent Enzymatic Oligonucleotide Synthesis (TiEOS): Its History, Prospects, and Challenges.

There is a growing demand for sustainable methods in research and development, where instead of hazardous chemicals, an aqueous medium is chosen to perform biological reactions. In this Perspective, we examine the history and current methodology of using enzymes to generate artificial single-stranded DNA. By using traditional solid-phase phosphoramidite chemistry as a metric, we also explore criteria for the method of template-independent enzymatic oligonucleotide synthesis (TiEOS). As its key component, we delve into the biology of one of the most enigmatic enzymes, terminal deoxynucleotidyl transferase (TdT). As TdT is found to exponentially increase antigen receptor diversity in the vertebrate immune system by adding nucleotides in a template-free manner, researchers have exploited this function as an alternative to the phosphoramidite synthesis method. Though TdT is currently the preferred enzyme for TiEOS, its random nucleotide incorporation presents a barrier in synthesis automation. Taking a closer look at the TiEOS cycle, particularly the coupling step, we find it is comprised of additions > n+1 and deletions. By tapping into the physical and biochemical properties of TdT, we strive to further elucidate its mercurial behavior and offer ways to better optimize TiEOS for production-grade oligonucleotide synthesis.

Discovery of genes involved in mitosis, cell division, cell wall integrity and chromosome segregation through construction of Schizosaccharomyces pombe deletion strains.

The fission yeast model system Schizosaccharomyces pombe is used to study fundamental biological processes. To continue to fill gaps in the Sz. pombe gene deletion collection, we constructed a set of 90 haploid gene deletion strains covering many previously uncharacterized genes. To begin to understand the function of these genes, we exposed this collection of strains to a battery of stress conditions. Using this information in combination with microscopy, proteomics and mini-chromosome loss assays, we identified genes involved in cell wall integrity, cytokinesis, chromosome segregation and DNA metabolism. This subset of non-essential gene deletions will add to the toolkits available for the study of biological processes in Sz. pombe. Copyright © 2016 John Wiley & Sons, Ltd.

Targeted and highly multiplexed detection of microorganisms by employing an ensemble of molecular probes.

The vast majority of microscopic life on earth consists of microbes that do not grow in laboratory culture. To profile the microbial diversity in environmental and clinical samples, we have devised and employed molecular probe technology, which detects and identifies bacteria that do and do not grow in culture. The only requirement is a short sequence of contiguous bases (currently 60 bases) unique to the genome of the organism of interest. The procedure is relatively fast, inexpensive, customizable, robust, and culture independent and uses commercially available reagents and instruments. In this communication, we report improving the specificity of the molecular probes substantially and increasing the complexity of the molecular probe set by over an order of magnitude (>1,200 probes) and introduce a new final readout method based upon Illumina sequencing. In addition, we employed molecular probes to identify the bacteria from vaginal swabs and demonstrate how a deliberate selection of molecular probes can identify less abundant bacteria even in the presence of much more abundant species.

Identification of new players in cell division, DNA damage response, and morphogenesis through construction of Schizosaccharomyces pombe deletion strains.

Many fundamental biological processes are studied using the fission yeast, Schizosaccharomyces pombe. Here we report the construction of a set of 281 haploid gene deletion strains covering many previously uncharacterized genes. This collection of strains was tested for growth under a variety of different stress conditions. We identified new genes involved in DNA metabolism, completion of the cell cycle, and morphogenesis. This subset of nonessential gene deletions will add to the toolkits available for the study of biological processes in S. pombe.

Direct oligonucleotide synthesis onto super-paramagnetic beads.

Super-paramagnetic beads (SPMB)s used for a variety of molecular diagnostic assays are prepared by attaching pre-synthesized oligonucleotides to the surface via a cumbersome and low efficient method of carbodiimide-mediated amide bond formation. To mainstream the process, we describe a novel procedure of direct oligonucleotide synthesis onto the surface of SPMBs (e.g. MyOne Dynabeads). With the many challenges surrounding containment of paramagnetic beads (≤1 µm) during automated oligonucleotide synthesis, we show that by applying a magnetic force directly to the SPMBs we prevent their loss caused by high-pressure drain steps during synthesis. To date we have synthesized 40 mers using a Spacer 9 phosphoramidite (triethylene glycol) coupled to the surface of hydroxylated SPMBs. HPLC analysis shows successful product generation with an average yield of 200 pmol per sample. Furthermore, because of the versatility of this powerful research tool, we envision its use in any laboratory working with conventional synthesis automation, as employed for single columns and for multi-well titer plates. In addition to direct synthesis of oligodeoxynucleotides (DNA) onto SPMBs, this platform also has the potential for RNA and peptide nucleic acid synthesis.

A rapid, cost-effective method of assembly and purification of synthetic DNA probes >100 bp.

Here we introduce a rapid, cost-effective method of generating molecular DNA probes in just under 15 minutes without the need for expensive, time-consuming gel-extraction steps. As an example, we enzymatically concatenated six variable strands (50 bp) with a common strand sequence (51 bp) in a single pool using Fast-Link DNA ligase to produce 101 bp targets (10 min). Unincorporated species were then filtered out by passing the crude reaction through a size-exclusion column (<5 min). We then compared full-length product yield of crude and purified samples using HPLC analysis; the results of which clearly show our method yields three-quarters that of the crude sample (50% higher than by gel-extraction). And while we substantially reduced the amount of unligated product with our filtration process, higher purity and yield, with an increase in number of stands per reaction (>12) could be achieved with further optimization. Moreover, for large-scale assays, we envision this method to be fully automated with the use of robotics such as the Biomek FX; here, potentially thousands of samples could be pooled, ligated and purified in either a 96, 384 or 1536-well platform in just minutes.