ABSTRACT
The bright, saturated iridescent colours of feathers are commonly produced by single and multi-layers of nanostructured melanin granules (melanosomes), air and keratin matrices, surrounded by an outer keratin cortex of varying thicknesses. The role of the keratin cortex in colour production remains unclear, despite its potential to act as a thin film or absorbing layer. We use electron microscopy, optical simulations and oxygen plasma-mediated experimental cortex removal to show that differences in keratin cortex thickness play a significant role in producing colours. The results indicate that keratin cortex thickness determines the position of the major reflectance peak (hue) from nanostructured melanosomes of common pheasant (Phasianus colchicus) feathers. Specifically, the common pheasant has appropriate keratin cortex thickness to produce blue and green structural colours. This finding identifies a general principle of structural colour production and sheds light on the processes that shaped the evolution of brilliant iridescent colours in the common pheasant.
ABSTRACT
The broadband antireflective (AR) effect for wide incident angles has a significant effect on the photoconversion efficiency of photovoltaics and visibility of large-format display panels. The fabrication of surface nanostructures has continued to attract research interest as an effective way to provide such optical performance. However, the effects of different nanostructure geometries are not fully understood, especially for wide-angle AR effects. In this work, we conduct a systematic analysis of the effect of periodic nanostructures such as nanocones (NCs) and inverted nanocones (INCs) on anti-reflectivity at high angles of incidence (AOIs) in terms of light scattering, guided-mode resonance (GMR), and internal reflections. NCs provide good coupling of light scattering and GMR because of their protruding geometry; hence, reduced reflectance can be obtained in the short wavelength region. Further, NCs exhibit relatively weaker GMR intensities and internal reflections, resulting in low reflectance in the long wavelength region. Therefore, NCs offer a superior broadband AR effect for high AOIs compared with INCs. Based on this analysis, we demonstrate an extremely low average reflectance (5.4%) compared to that of the bare substrate (34.7%) for the entire visible range at an AOI of 75° by fabricating NCs on both sides of the substrate.
ABSTRACT
Melanin has been a widely researched pigment by scientists for decades as it is undoubtedly the most ubiquitous and ancient pigment found in nature. Melanin plays very significant roles in structural plumage colors in birds: it has visible light-absorbing capabilities, and nanoscale structures can be formed by self-assembling melanin granules. Herein, we review recent progress on melanin-based structural coloration research. We hope that this review will provide current understanding of melanin's structural and optical properties, natural coloration mechanisms, and biomimetic methods to implement artificial melanin-based structural colors.
ABSTRACT
Neuromorphic systems require integrated structures with high-density memory and selector devices to avoid interference and recognition errors between neighboring memory cells. To improve the performance of a selector device, it is important to understand the characteristics of the switching process. As changes by switching cycle occur at local nanoscale areas, a high-resolution analysis method is needed to investigate this phenomenon. Atomic force microscopy (AFM) is used to analyze the local changes because it offers nanoscale detection with high-resolution capabilities. This review introduces various types of AFM such as conductive AFM (C-AFM), electrostatic force microscopy (EFM), and Kelvin probe force microscopy (KPFM) to study switching behaviors.
ABSTRACT
At the interfaces of metal and dielectric materials, strong light-matter interactions excite surface plasmons; this allows electromagnetic field confinement and enhancement on the sub-wavelength scale. Such phenomena have attracted considerable interest in the field of exotic material-based nanophotonic research, with potential applications including nonlinear spectroscopies, information processing, single-molecule sensing, organic-molecule devices, and plasmon chemistry. These innovative plasmonics-based technologies can meet the ever-increasing demands for speed and capacity in nanoscale devices, offering ultrasensitive detection capabilities and low-power operations. Size scaling from the nanometer to sub-nanometer ranges is consistently researched; as a result, the quantum behavior of localized surface plasmons, as well as those of matter, nonlocality, and quantum electron tunneling is investigated using an innovative nanofabrication and chemical functionalization approach, thereby opening a new era of quantum plasmonics. This new field enables the ultimate miniaturization of photonic components and provides extreme limits on light-matter interactions, permitting energy transport across the extremely small plasmonic gap. In this review, a comprehensive overview of the recent developments of quantum plasmonic resonators with particular focus on novel materials is presented. By exploring the novel gap materials in quantum regime, the potential quantum technology applications are also searched for and mapped out.
ABSTRACT
A phase change nanowire holds a promise for nonvolatile memory applications, but its transition mechanism has remained unclear due to the analytical difficulties at atomic resolution. Here we obtain a deeper understanding on the phase transition of a single crystalline Ge2Sb2Te5 nanowire (GST NW) using atomic scale imaging, diffraction, and chemical analysis. Our cross-sectional analysis has shown that the as-grown hexagonal close-packed structure of the single crystal GST NW transforms to a metastable face-centered cubic structure due to the atomic migration to the pre-existing vacancy layers in the hcp structure going through iterative electrical switching. We call this crystal structure transformation "metastabilization", which is also confirmed by the increase of set-resistance during the switching operation. For the set to reset transition between crystalline and amorphous phases, high-resolution imaging indicates that the longitudinal center of the nanowire mainly undergoes phase transition. According to the atomic scale analysis of the GST NW after repeated electrical switching, partial crystallites are distributed around the core-centered amorphous region of the nanowire where atomic migration is mainly induced, thus potentially leading to low power electrical switching. These results provide a novel understanding of phase change nanowires, and can be applied to enhance the design of nanowire phase change memory devices for improved electrical performance.
ABSTRACT
Novel hierarchical surfaces combining paraffin wax crystals and CuO nanowires are presented. We demonstrate a bioinspired hierarchical wax on nanowire (NW) structures having high water and ethylene glycol repellence. In general, vertically grown nanowire arrays can provide a superhydrophobic surface (SHS) due to extremely high surface roughness but cannot repel ethylene glycol. In this paper, C36H74 and C50H102 waxes are thermally evaporated on the surface of CuO NWs, forming highly ordered, three-dimensional (3D) hierarchical structures via self-assembly of wax crystals. These two and three level hierarchical structures provide perfect self-cleaning characteristics, with water contact angles (CAs) exceeding 170°. Furthermore, C36H74 and C50H102 wax crystals assembled perpendicularly to the longitudinal NW axis form a re-entrant (that is, a multivalued surface topography) curvature enabling high repellence to ethylene glycol (EG) with CAs exceeding 160°. We analyze the wettability dependence on wax crystal size and structure for the optimization of nonwettable hierarchical structured surfaces.
