Tailoring Contacts for High-Performance 1D Ta2Pt3S8 Field-Effect Transistors.

Materials with van der Waals (vdW) unit structures rely on weak interunit vdW forces, facilitating physical separation and advancing nanomaterial research with remarkable electrical properties. Recently, there has been growing interest in one-dimensional (1D) vdW materials, celebrated for their advantageous properties, characterized by reduced dimensionality and the absence of dangling bonds. In this context, we synthesize Ta2Pt3S8, a 1D vdW material, and assess its suitability for field-effect transistor (FET) applications. Spectroscopic analysis and electrical characterization confirmed that the band gap and work function of Ta2Pt3S8 are 1.18 and 4.77 eV, respectively. Leveraging various electrode materials, we fabricated n-type FETs based on Ta2Pt3S8 and identified Cr as the optimal electrode, exhibiting a high mobility of 57 cm2 V-1 s-1. In addition, we analyzed the electron transport mechanism in n-type FETs by investigating Schottky barrier height, Schottky barrier tunneling width, and contact resistance. Furthermore, we successfully fabricated p-type operating Ta2Pt3S8 FETs using a molybdenum trioxide (MoO3) layer as a high work function contact electrode. Finally, we achieved Ta2Pt3S8 nanowire rectifying diodes by creating a p-n junction with asymmetric contact electrodes of Cr and MoO3, demonstrating an ideality factor of 1.06. These findings highlight the electronic properties of Ta2Pt3S8, positioning it as a promising 1D vdW material for future nanoelectronics and functional vdW-based device applications.

Colloidal Synthesis of Ultrathin and Se-Rich V2Se9 Nanobelts as High-Performance Anode Materials for Li-Ion Batteries.

In this study, the one-dimensional (1D) material V2Se9 was successfully synthesized using a colloidal method with VO(acac)2 and Se powder as precursors in a 1-octadecene solvent. The obtained colloidally synthesized V2Se9 (C-V2Se9) has an ultrathin nanobelt shape and a 4.5 times higher surface area compared with the bulk V2Se9, which is synthesized in a solid-state reaction as previously reported. In addition, all surfaces of C-V2Se9 are exposed to Se atoms, which is advantageous for storing Li through the conversion reaction into the Li2Se phase. Herein, the electrochemical performance of the C-V2Se9 anode material is evaluated; thus, the novelty of C-V2Se9 as a Se-rich 1D anode material is verified. The C-V2Se9 electrode exhibits a reversible capacity of 893.21 mA h g-1 and a Coulombic efficiency of 97.82% at the 100th cycle and excellent structural stability. Compared with the bulk V2Se9 electrode, the outstanding electrochemical performance of C-V2Se9 is attributed to its ultrathin nanobelt shape, high surface area, shorter Li diffusion length, and more electrochemically active sites. This work indicates the great potential of the Se-rich 1D material, C-V2Se9, as a post-transition metal dichalcogenide material for high-performance LIBs.

Fabrication of a Field-Effect Transistor Based on 2D Novel Ternary Chalcogenide PdPS.

Two-dimensional (2D) palladium phosphide sulfide (PdPS) has garnered significant attention, owing to its exotic physical properties originating from the distinct Cairo pentagonal tiling topology. Nevertheless, the properties of PdPS remain unexplored, especially for electronic devices. In this study, we introduce the thickness-dependent electrical characteristics of PdPS flakes into fabricated field-effect transistors (FETs). The broad thickness variation of the PdPS flakes, ranging from 0.7-306 nm, is prepared by mechanical exfoliation, utilizing large bulk crystals synthesized via chemical vapor transport. We evaluate this variation and confirm a high electron mobility of 14.4 cm2 V-1 s-1 and Ion/Ioff > 107. Furthermore, the 6.8 nm-thick PdPS FET demonstrates a negligible Schottky barrier height at the gold electrode contact, as evidenced by the measurement of the temperature-dependent transfer characteristics. Consequently, we adjusted the Fowler-Nordheim tunneling mechanism to elucidate the charge-transport mechanism, revealing a modulated mobility variation from 14.4 to 41.2 cm2 V-1 s-1 with an increase in the drain voltage from 1 to 5 V. The present findings can broaden the understanding of the unique properties of PdPS, highlighting its potential as a 2D ternary chalcogenide in future electronic device applications.

Controlled Bipolar Doping of One-Dimensional van der Waals Nb2Pd3Se8.

Tailoring the electrical properties of one-dimensional (1D) van der Waals (vdW) materials is desirable for their applications toward electronic devices by exploiting their unique characteristics. However, 1D vdW materials have not been extensively investigated for modulation of their electrical properties. Here we control doping levels and types of 1D vdW Nb2Pd3Se8 over a wide energy range by immersion in AuCl3 or ß-nicotinamide adenine dinucleotide (NADH) solutions, respectively. Through spectroscopic analyses and electrical characterizations, we confirm that the charges were effectively transferred to Nb2Pd3Se8, and the dopant concentration was adjusted to the immersion time. Furthermore, we make the axial p-n junction of 1D Nb2Pd3Se8 by a selective area p-doping using the AuCl3 solution, which exhibits rectifying behavior with an Iforward/Ireverse of 81 and an ideality factor of 1.2. Our findings could pave the way to more practical and functional electronic devices based on 1D vdW materials.

Novel High Current-Carrying Quasi-1D Material: Nb2 PdS6.

A quasi-one-dimensional van der Waals metallic nanowire Nb2 PdS6 is synthesized, and its electrical characteristics are analyzed. The chemical vapor transport method is applied to produce centimeter-scale Nb2 PdS6 crystals with needle-like structures and X-ray diffraction (XRD) confirms their high crystallinity. Scanning transmission electron microscopy reveals the crystal orientation and atomic arrangement of the specific region with atomic resolution. The electrical properties are examined by delaminating bulk Nb2 PdS6 crystals into a few nanometer-scale wires onto 100 nm-SiO2 /Si substrates using a mechanical exfoliation process. Ohmic behavior is confirmed at the low-field measurements regardless of their thickness variation, and 4.64 nm-thick Nb2 PdS6 shows a breakdown current density (JBD ) of 52 MA cm-2 when the high electrical field is delivered. Moreover, with further exfoliation down to a single atomic chain, the JBD of Nb2 PdS6 is predicted to have a value of 527 MA cm-2 . The breakdown of Nb2 PdS6 proceeds due to the Joule heating mechanism, and the Nb2 PdS6 nanowires are well fitted to the 1D thermal dissipating model.

Colloidal synthesis of 1-D van der Waals material Nb2Se9: study of synergism of coordinating agent in a co-solvent system.

Low-dimensional Nb2Se9 nanocrystals were synthesised through a simple one-pot colloidal synthesis with C18 organic solvents (octadecane, oleylalcohol, octadecanethiol, octadecene (ODE), and oleylamine (OLA)) of varied terminal functional groups. The solvent with high reducing power facilitated the nucleation of the nanoparticle, lowering threshold concentration and broadening the concentration spectrum. As a solvent, reducing agent, and capping agent, ODE functions as a primary factor in the synthesis of high-quality Nb2Se9 nanorods. We further discuss the unique adhesion role of ODE under the co-solvent system and demonstrate morphology control through synergism between ODE and OLA, verified by the electrochemical measurements.

Organic Dispersion of Mo3Se3- Single-Chain Atomic Crystals Using Surface Modification Methods.

In this study, single-chain atomic crystals (SCACs), Mo3Se3-, which can be uniformly dispersed, with an atomically thin diameter of ∼0.6 nm were modified to disperse in an organic solvent. Various surfactants were chosen to provide steric hindrance to aqueous-dispersed Mo3Se3- by modifying the surface of Mo3Se3-. The organic dispersions of surface-modified Mo3Se3- SCACs in nonpolar solvent (toluene, benzene, and chloroform) were stable with a uniform diameter of 2 nm, and they have enhanced stability from oxidation (>10 days). With the surfactants that have a polystyrene tail group (PS-NH2), the surface-modified Mo3Se3- SCAC showed high compatibility with a polystyrene polymer matrix. Using the surface-modified Mo3Se3- SCAC, a homogeneous Mo3Se3-/polystyrene/toluene organogel was prepared. More importantly, the Mo3Se3-/polystyrene organogel exhibits significantly enhanced mechanical properties, with the improvement of 202.27% and 279.52% for tensile strength and elongation, respectively, compared with that of the pure organogel. The surface-modified Mo3Se3- had a similar structure with a polymer matrix, and the properties of the polymer can be improved even with a small addition of Mo3Se3-.

One-dimensional van der Waals stacked p-type crystal Ta2Pt3Se8 for nanoscale electronics.

Recently, ternary transition metal chalcogenides Ta2X3Se8 (X = Pd or Pt) have attracted great interest as a class of emerging one-dimensional (1D) van der Waals (vdW) materials. In particular, Ta2Pd3Se8 has been actively studied owing to its excellent charge transport properties as an n-type semiconductor and ultralong ballistic phonon transport properties. Compared to subsequent studies on the Pd-containing material, Ta2Pt3Se8, another member of this class of materials has been considerably less explored despite its promising electrical properties as a p-type semiconductor. Herein, we demonstrate the electrical properties of Ta2Pt3Se8 as a promising channel material for nanoelectronic applications. High-quality bulk Ta2Pt3Se8 single crystals were successfully synthesized by a one-step vapor transport reaction. Scanning Kelvin probe microscopy measurements were used to investigate the surface potential difference and work function of the Ta2Pt3Se8 nanoribbons of various thicknesses. Field-effect transistors fabricated on exfoliated Ta2Pt3Se8 nanoribbons exhibited moderate p-type transport properties with a maximum hole mobility of 5 cm2 V-1 s-1 and an Ion/Ioff ratio of >104. Furthermore, the charge transport mechanism of Ta2Pt3Se8 was analyzed by temperature-dependent transport measurements in the temperature range from 90 to 320 K. To include Ta2Pt3Se8 in a building block for modern 1D electronics, we demonstrate p-n junction characteristics using the electron beam doping method.

High Breakdown Current Density in Quasi-1D van der Waals Layered Material Ta2NiSe7.

We synthesized ternary composition chalcogenide Ta2NiSe7, a quasi-one-dimensional (Q1D) material with excellent crystallinity. To utilize the excellent electrical conductivity property of Ta2NiSe7, the breakdown current density (JBD) according to thickness change through mechanical exfoliation was measured. It was confirmed that as the thickness decreased, the maximum breakdown voltage (VBD) increased, and at 18 nm thickness, 35 MA cm-2 of JBD was measured, which was 35 times higher than that of copper, which is commonly used as an interconnect material. By optimization of the exfoliation process, it is expected that through a theoretical model fitting, the JBD can be increased to about 356 MA cm-2. It is expected that the low-dimensional materials with ternary compositions proposed through this experiment can be used as candidates for current-carrying materials that are required for the miniaturization of various electronic devices.

Establishment of HLA class I and MICA/B null HEK-293T panel expressing single MICA alleles to detect anti-MICA antibodies.

Pre- and post-transplantation anti-MICA antibody detection development are associated with an increased rejection risk and low graft survival. We previously generated HLA class I null HEK-293T using CRISPR/Cas9, while MICA and MICB genes were removed in this study. A panel of 11 cell lines expressing single MICA alleles was established. Anti-MICA antibody in the sera of kidney transplant patients was determined using flow cytometric method (FCM) and the Luminex method. In the 44 positive sera, the maximum FCM value was 2879 MFI compared to 28,135 MFI of Luminex method. Eleven sera (25%) were determined as positive by FCM and 32 sera (72%) were positive by the Luminex method. The sum of total MICA antigens, MICA*002, *004, *009, *019, and *027 correlation showed a statistically significant between the two methods (P = 0.0412, P = 0.0476, P = 0.0019, P = 0.0098, P = 0.0467, and P = 0.0049). These results demonstrated that HEK-293T-based engineered cell lines expressing single MICA alleles were suitable for measuring specific antibodies against MICA antigens in the sera of transplant patients. Studies of antibodies to MICA antigens may help to understand responses in vivo and increase clinical relevance at the cellular level such as complement-dependent cytotoxicity.

Ta2 Ni3 Se8 : 1D van der Waals Material with Ambipolar Behavior.

In this study, high-purity and centimeter-scale bulk Ta2 Ni3 Se8 crystals are obtained by controlling the growth temperature and stoichiometric ratio between tantalum, nickel, and selenium. It is demonstrated that the bulk Ta2 Ni3 Se8 crystals could be effectively exfoliated into a few chain-scale nanowires through simple mechanical exfoliation and liquid-phase exfoliation. Also, the calculation of electronic band structures confirms that Ta2 Ni3 Se8 is a semiconducting material with a small bandgap. A field-effect transistor is successfully fabricated on the mechanically exfoliated Ta2 Ni3 Se8 nanowires. Transport measurements at room temperature reveal that Ta2 Ni3 Se8 nanowires exhibit ambipolar semiconducting behavior with maximum mobilities of 20.3 and 3.52 cm2 V-1 s-1 for electrons and holes, respectively. The temperature-dependent transport measurement (from 90 to 295 K) confirms the carrier transport mechanism of Ta2 Ni3 Se8 nanowires. Based on these characteristics, the obtained 1D vdW material is expected to be a potential candidate for additional 1D materials as channel materials.

Bio-essential Inorganic Molecular Nanowires as a Bioactive Muscle Extracellular-Matrix-Mimicking Material.

Many physiochemical properties of the extracellular matrix (ECM) of muscle tissues, such as nanometer scale dimension, nanotopography, negative charge, and elasticity, must be carefully reproduced to fabricate scaffold materials mimicking muscle tissues. Hence, we developed a muscle tissue ECM-mimicking scaffold using Mo6S3I6 inorganic molecular wires (IMWs). Composed of bio-essential elements and having a nanofibrous structure with a diameter of ∼1 nm and a negative surface charge with high stability, Mo6S3I6 IMWs are ideal for mimicking natural ECM molecules. Once Mo6S3I6 IMWs were patterned on a polydimethylsiloxane surface with an elasticity of 1877.1 ± 22.2 kPa, that is, comparable to that of muscle tissues, the proliferation and α-tubulin expression of myoblasts enhanced significantly. Additionally, the repetitive one-dimensional patterns of Mo6S3I6 IMWs induced the alignment and stretching of myoblasts with enhanced α-tubulin expression and differentiation into myocytes. This study demonstrates that Mo6S3I6 IMWs are promising for mimicking the ECM of muscle tissues.

A study on the bio-applicability of aqueous-dispersed van der Waals 1-D material Nb2Se9 using poloxamer.

In this research, dispersion of a new type of one-dimensional inorganic material Nb2Se9, composed of van der Waals bonds, in aqueous solution for bio-application study were studied. To disperse Nb2Se9, which exhibits hydrophobic properties in water, experiments were carried out using a block copolymer (poloxamer) as a dispersant. It was confirmed that PPO, the hydrophobic portion of Poloxamer, was adsorbed onto the surface of Nb2Se9, and PEO, the hydrophilic portion, induced steric hinderance to disperse Nb2Se9 to a size of 10 nm or less. To confirm the adaptability of muscle cells C2C12 to the dispersed Nb2Se9 using poloxamer 188 as dispersant, a MTT assay and a live/dead assay were performed, demonstrating improvement in the viability and proliferation of C2C12 cells.

Aqueous Dispersion of One-Dimensional van der Waals Material Mo6S3I6 with the Charge Type of the Hydrophobic Dispersant Tail.

Aqueous dispersion of van der Waals bonded one-dimensional materials Mo6S3I6 with hydrophobic surfaces has been studied. The surface charge of the dispersed Mo6S3I6 is controlled from negative to positive by the charge type of dispersant tail (anionic, SDS and NaDDBS; cationic, CTAB; nonionic, Poloxamer 407), and through this, it is possible to deposit the dispersed Mo6S3I6 in nanosized by electrophoretic deposition at a desired position. When a flexible device was manufactured by transferring Mo6S3I6, it was confirmed that electrical conductivity can be measured in 40% of elongation and more than 1000 times cyclic test.