Enhancement of triboelectricity based on fully organic composite films with a conducting polymer.

Triboelectric nanogenerators (TENGs) based on ferroelectric organic materials have advantages of high flexibility, biocompatibility, controllable ferroelectric properties, etc. However, this has limited the electrical output performance due to their lower ferroelectric characteristics than those of inorganic ferroelectric materials. A lot of effort has been made to improve the organic ferroelectric characteristics through composites, surface modifications, structures, etc. Herein, we report TENGs made of ferroelectric composite materials consisting of poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The composite was prepared by simply blending PVDF-TrFE and PEDOT:PSS with a weight ratio from 0% to 60%. When the ratio was 20%, the ferroelectric-crystalline phase was enhanced and the highest dielectric constant was observed. Accordingly, the TENGs consisting of 20% composite film and polyimide exhibited the best output performance: the maximum open circuit voltage and short circuit current were ∼15 V and ∼2.3 µA at 1 Hz oscillation, respectively. These results indicate that the ferroelectric characteristics of PVDF-TrFE can be enhanced by adding PEDOT:PSS as a nanofiller.

Enhanced output performance on LbL multilayer PVDF-TrFE piezoelectric films for charging supercapacitor.

The piezoelectric nanogenerator (PENG) has the potential to become a promising power supply for monitoring and sensors in Internet of Things (IoT) systems through wireless networks. In order to further increase the utilization of energy harvesters in an IoT system, we introduce a novel approach that greatly enhances the piezoelectric output performances by employing the layer-by-layer (LbL) method. Poly(vinylidenefluoride-co-trifluoroethylene) (PVDF-TrFE) polymer film, which has piezoelectric properties and mechanical flexibility, was used for the active layer in PENG. The maximum open-circuit voltage and closed-circuit current of the LbL multilayer PENG reached 34 V and 100 nA, respectively. In particular, the closed-circuit current of the LbL multilayer PENG was dramatically improved to be five times higher than that of the single-layer PENG. Furthermore, a supercapacitor was employed to investigate the energy storage capability of PENGs using different methods. The proposed LbL multilayer PENG is expected to be a candidate for a promising power supply for self-powered systems in the IoT system.

A sensor-less LED dimming system based on daylight harvesting with BIPV systems.

Artificial lighting in office buildings typically requires 30% of the total energy consumption of the building, providing a substantial opportunity for energy savings. To reduce the energy consumed by indoor lighting, we propose a sensor-less light-emitting diode (LED) dimming system using daylight harvesting. In this study, we used light simulation software to quantify and visualize daylight, and analyzed the correlation between photovoltaic (PV) power generation and indoor illumination in an office with an integrated PV system. In addition, we calculated the distribution of daylight illumination into the office and dimming ratios for the individual control of LED lights. Also, we were able directly to use the electric power generated by PV system. As a result, power consumption for electric lighting was reduced by 40 - 70% depending on the season and the weather conditions. Thus, the dimming system proposed in this study can be used to control electric lighting to reduce energy use cost-effectively and simply.

Microscopic and spectroscopic analyses of Pt-decorated carbon nanowires formed on carbon fiber paper.

We report the synthesis of carbon nanowires (CNWs) via chemical vapor deposition using catalytic decomposition of ethanol on nanosized transition metals such as Co, Fe, and Ni. Dip-coating process was used for the formation of catalytic nanoparticles, inducing the growth of CNWs on the surface of the carbon fiber paper (CFP). The liquid ethanol used as carbon source was atomized by an ultrasonic atomizer and subsequently flowed into the reactor that was heated up to a synthesis temperature of 600-700°C. Microscopic images show that CNWs of <50 nm were densely synthesized on the surface of the CFP. Raman spectra reveal that a higher synthesis temperature leads to the growth of higher crystalline CNWs. In addition, we demonstrate the successful decoration of platinum nanoparticles on the surface of the prepared CNWs/CFP using the electrochemical deposition technique.

Cost-effective large-scale fabrication of diffractive optical elements by using conventional semiconducting processes.

In this article, we introduce a simple fabrication method for SiO(2)-based thin diffractive optical elements (DOEs) that uses the conventional processes widely used in the semiconductor industry. Photolithography and an inductively coupled plasma etching technique are easy and cost-effective methods for fabricating subnanometer-scale and thin DOEs with a refractive index of 1.45, based on SiO(2). After fabricating DOEs, we confirmed the shape of the output light emitted from the laser diode light source and applied to a light-emitting diode (LED) module. The results represent a new approach to mass-produce DOEs and realize a high-brightness LED module.