In-situ neutron diffraction study of lattice deformation behaviour of commercially pure titanium at cryogenic temperature.

Titanium has a significant potential for the cryogenic industrial fields such as aerospace and liquefied gas storage and transportation due to its excellent low temperature properties. To develop and advance the technologies in cryogenic industries, it is required to fully understand the underlying deformation mechanisms of Ti under the extreme cryogenic environment. Here, we report a study of the lattice behaviour in grain families of Grade 2 CP-Ti during in-situ neutron diffraction test in tension at temperatures of 15-298 K. Combined with the neutron diffraction intensity analysis, EBSD measurements revealed that the twinning activity was more active at lower temperature, and the behaviour was complicated with decreasing temperature. The deviation of linearity in the lattice strains was caused by the load-redistribution between plastically soft and hard grain families, resulting in the three-stage hardening behaviour. The lattice strain behaviour further deviated from linearity with decreasing temperature, leading to the transition of plastically soft-to-hard or hard-to-soft characteristic of particular grain families at cryogenic temperature. The improvement of ductility can be attributed to the increased twinning activity and a significant change of lattice deformation behaviour at cryogenic temperature.

Forming limit prediction using a self-consistent crystal plasticity framework: a case study for body-centered cubic materials.

A rate-dependent self-consistent crystal plasticity model was incorporated with the Marciniak-Kuczynski model in order to study the effects of anisotropy on the forming limits of BCC materials. The computational speed of the model was improved by a factor of 24 when running the simulations for several strain paths in parallel. This speed-up enabled a comprehensive investigation of the forming limits of various BCC textures, such as γ, σ, α, η and ϵ fibers and a uniform (random) texture. These simulations demonstrate that the crystallographic texture has significant (both positive and negative) effects on the resulting forming limit diagrams. For example, the γ fiber texture, which is often sought through thermo-mechanical processing due to a high r-value, had the highest forming limit in the balanced biaxial strain path but the lowest forming limit under the plane strain path among the textures under consideration. A systematic investigation based on the results produced by the current model, referred to as 'VPSC-FLD', suggests that the r-value does not serve as a good measure of forming limit strain. However, model predictions show a degree of correlation between the r-value and the forming limit stress.