Rape Myth Consistency and Gender Differences in Perceiving Rape Victims: A Meta-Analysis.

An overview discusses feminist analyses of oppression, attitudes toward rape victims, and previously studied predictors of individuals' attitudes toward rape victims. To better understand such attitudes, this meta-analysis examines the moderating influences of various rape victim, perpetrator, and crime characteristics' rape myth consistency on gender differences in individuals' perceptions of rape victims (i.e., victim responsibility and blame attributions and rape minimizing attitudes). Consistent with feminist theoretical predictions, results indicated that, overall, men perceived rape victims more negatively than women did. However, this sex difference was moderated by the rape myth consistency within the rape vignettes. Implications for research are discussed.

Rape Myths, Rape Scripts, and Common Rape Experiences of College Women: Differences in Perceptions of Women Who Have Been Raped.

Rape is prevalent at colleges. Although research suggests commonalities across many college women's rape experiences (e.g., perpetrators using multiple coercive strategies), vignettes used to assess rape perceptions often reflect false beliefs. Two studies varying a perpetrator's coercive tactics examine rape perceptions using vignettes reflecting rape myths, rape scripts, or many college women's common rape experiences. Participants perceive a woman who was raped more positively in vignettes reflecting common rape experiences versus those reflecting rape myths or scripts. Theoretical, educational, and research implications are discussed.

Precursors to rape: pressuring behaviors and rape proclivity.

We developed measures assessing personal and normative attitudes toward two types of behaviors that are symptomatic of rape culture. We conceptualize sexual violence as existing on a continuum and argue that two types of behaviors may be potential antecedents to (and consequences of) sexual violence: attempts to pressure, which mimic the power dynamics of rape in a less aggressive fashion, and benevolent dating behaviors, which are accepted dating scripts in which men initiate action. We examined individuals' acceptance of these behaviors in relation to their attitudes toward rape victims and among men to rape proclivity. This initial work suggests that these constructs and measures may be useful to investigate in future research.

Quantitative phase and refractive index measurements with point-source digital in-line holographic microscopy.

Point-source digital in-line holographic microscopy with numerical reconstruction is ideally suited for quantitative phase measurements to determine optical path lengths and to extract changes in refractive index within accuracy close to 0.001 on the submicrometer length scale. This is demonstrated with simulated holograms and with detailed measurements on a number of different micrometer-sized samples such as suspended drops, optical fibers, as well as organisms of biological interest such as E. coli bacteria, HeLa cells, and fibroblast cells.

Effects of racism on perceptions and punishment of intra- and interracial crimes.

The majority of hate crimes in the United States are driven by racial bias. However, extra-legal factors such as the perpetrators' motivations, the races of the victims and perpetrators, and the presence or absence of hate symbols or slurs often result in ambiguity in the classification of crimes as hate crimes. This uncertainty evokes consideration of how such crimes are characterized and of how violent intra- and interracial crimes are perceived and responded to. The current study used violent crime vignettes to explore the effects of participants' levels of racism, perpetrator and victim race, and assault severity on perceptions of crimes as "hate crimes," victim blame, and sentence recommendations. These results contribute to the understanding of how intra- and interracial crimes are perceived and how individuals' levels of racism affect these perceptions.

Oppression through acceptance?: predicting rape myth acceptance and attitudes toward rape victims.

Feminist theories of rape motivation are based on research suggesting a relationship between dominance and sexual aggression. However, the relationship between dominance and rape myth acceptance (RMA), a predictor of rape proclivity and sexual aggression and a key component in feminist theory, is understudied. The current study tests the hypotheses that individuals' scores on sex-based oppression and intergroup dominance measures will improve the predictive models for RMA and attitudes toward rape and rape victims. The hypotheses are supported. Individuals' general intergroup dominance and sex-based oppression attitudes provide significant unique prediction beyond previously studied predictors of attitudes about rape and rape victims.

The impact of racial slurs and racism on the perceptions and punishment of violent crime.

When a crime is committed by an individual of one race against an individual of another race, there is the possibility that the crime is a hate crime. Legislation often mandates harsher penalties for perpetrators convicted of crimes determined to be hate crimes, yet this determination is difficult to make. This study used vignettes of violent crimes to examine how the races of the perpetrators and victims, the severity of the assault, and the use of racial slurs by the perpetrators would affect perceptions of the crimes as "hate crimes," victim blaming, and sentencing recommendations. Results showed that each of these factors affected participants' perceptions and punishments of violent crime. Participants' levels of racism were an additional factor. These results contribute to the understanding of how crimes in which the perpetrator's and victim's races differ are perceived.

Comment on "Reconstruction algorithm for high-numerical-aperture holograms with diffraction-limited resolution".

We comment on a recent Letter by Zhang et al. [Opt. Lett. 31, 1633 (2006)] in which the authors proposed a reconstruction algorithm for high-numerical-aperture (NA) holograms. Such an algorithm has been available for in-line holography for more than a decade. The authors' "achievement" of high NA for digital in-line holography, NA=0.17, is below what was reported already several years ago (NA=0.30) and is considerably lower than what is routinely achieved now. We present reconstructions of holograms acquired with NAs above 0.4 in which we show maximal achievable resolution.

Immersion digital in-line holographic microscopy.

Digital in-line holographic microscopy is a promising new tool for high resolution imaging. We demonstrate, by using latex beads, that a considerable increase in numerical aperture, and, therefore, resolution can be achieved if the space between a source and a CCD camera chip is filled with a high refractive index medium. The high refractive index medium implies a shorter effective wavelength so that submicrometer resolution can be obtained with laser light in the visible range.

Tracking particles in four dimensions with in-line holographic microscopy.

We describe a simple holographic method that has enabled us to capture as a single data set the trajectories of micrometer-sized objects suspended in water. By subtracting consecutive holograms of a particle suspension and then adding these difference holograms, we constructed a final data set that contains the time evolution of the particle trajectories free from spurious background interference effects. The method is illustrated by a recording of the motion of 5-10-microm diameter algae in water.

Digital in-line holography of microspheres.

We have used digital in-line holography (DIH) with numerical reconstruction to image micrometer-sized latex spheres as well as ferrimagnetic beads suspended in gelatin. We have examined in detail theoretically and experimentally the conditions necessary to achieve submicrometer resolution of holographic reconstructions. We found that both transparent and opaque particles could be imaged with a resolution that was limited only by the wavelength of the light used. Simple inspection of intensity profiles through a particle allowed an estimate to be made of the particle's three position coordinates within an accuracy of a few hundred nanometers. When the derivative of a second-order polynomial fitted to the intensity profiles was taken, the X, Y, Z position coordinates of particles could be determined within +/-50 nm. More-accurate positional resolution should be possible with the help of more-advanced computer averaging techniques. Because a single hologram can give information about a large collection of distributed particles, DIH offers the prospect of a powerful new tool for three-dimensional tracking of particles.

Digital in-line holography for biological applications.

Digital in-line holography with numerical reconstruction has been developed into a new tool, specifically for biological applications, that routinely achieves both lateral and depth resolution, at least at the micron level, in three-dimensional imaging. The experimental and numerical procedures have been incorporated into a program package with a very fast reconstruction algorithm that is now capable of real-time reconstruction. This capability is demonstrated for diverse objects, such as suspension of microspheres and biological samples (diatom, the head of Drosophila melanogaster), and the advantages are discussed by comparing holographic reconstructions with images taken by using conventional compound light microscopy.

On the architecture of the gram-negative bacterial murein sacculus.

The peptidoglycan network of the murein sacculus must be porous so that nutrients, waste products, and secreted proteins can pass through. Using Escherichia coli and Pseudomonas aeruginosa as a baseline for gram-negative sacculi, the hole size distribution in the peptidoglycan network has been modeled by computer simulation to deduce the network's properties. By requiring that the distribution of glycan chain lengths predicted by the model be in accord with the distribution observed, we conclude that the holes are slits running essentially perpendicular to the local axis of the glycan chains (i. e., the slits run along the long axis of the cell). This result is in accord with previous permeability measurements of Beveridge and Jack and Demchik and Koch. We outline possible advantages that might accrue to the bacterium via this architecture and suggest ways in which such defect structures might be detected. Certainly, large molecules do penetrate the peptidoglycan layer of gram-negative bacteria, and the small slits that we suggest might be made larger by the bacterium.

Thickness and elasticity of gram-negative murein sacculi measured by atomic force microscopy.

Atomic force microscopy was used to measure the thickness of air-dried, collapsed murein sacculi from Escherichia coli K-12 and Pseudomonas aeruginosa PAO1. Air-dried sacculi from E. coli had a thickness of 3.0 nm, whereas those from P. aeruginosa were 1.5 nm thick. When rehydrated, the sacculi of both bacteria swelled to double their anhydrous thickness. Computer simulation of a section of a model single-layer peptidoglycan network in an aqueous solution with a Debye shielding length of 0.3 nm gave a mass distribution full width at half height of 2.4 nm, in essential agreement with these results. When E. coli sacculi were suspended over a narrow groove that had been etched into a silicon surface and the tip of the atomic force microscope used to depress and stretch the peptidoglycan, an elastic modulus of 2.5 x 10(7) N/m(2) was determined for hydrated sacculi; they were perfectly elastic, springing back to their original position when the tip was removed. Dried sacculi were more rigid with a modulus of 3 x 10(8) to 4 x 10(8) N/m(2) and at times could be broken by the atomic force microscope tip. Sacculi aligned over the groove with their long axis at right angles to the channel axis were more deformable than those with their long axis parallel to the groove axis, as would be expected if the peptidoglycan strands in the sacculus were oriented at right angles to the long cell axis of this gram-negative rod. Polar caps were not found to be more rigid structures but collapsed to the same thickness as the cylindrical portions of the sacculi. The elasticity of intact E. coli sacculi is such that, if the peptidoglycan strands are aligned in unison, the interstrand spacing should increase by 12% with every 1 atm increase in (turgor) pressure. Assuming an unstressed hydrated interstrand spacing of 1.3 nm (R. E. Burge, A. G. Fowler, and D. A. Reaveley, J. Mol. Biol. 117:927-953, 1977) and an internal turgor pressure of 3 to 5 atm (or 304 to 507 kPa) (A. L. Koch, Adv. Microbial Physiol. 24:301-366, 1983), the natural interstrand spacing in cells would be 1.6 to 2.0 nm. Clearly, if large macromolecules of a diameter greater than these spacings are secreted through this layer, the local ordering of the peptidoglycan must somehow be disrupted.

Atomic force microscope measurements of long-range forces near lipid-coated surfaces in electrolytes.

The interaction of DMPC (L-alpha-dimyristoyl-1,2-diterradecanoyl-sn-glycero-3-phosphoch oli ne, C36H72NO8P) lipid-coated Si3N4 surfaces immersed in an electrolyte was investigated with an atomic force microscope. A long-range interaction was observed, even when the Si3N4 surfaces were covered with nominally neutral lipid layers. The interaction was attributed to Coulomb interactions of charges located at the lipid surface. The experimental force curves were compared with solutions for the linearized as well as with exact solutions of the Poisson-Boltzmann equation. The comparison suggested that in 0.5 mM KCl electrolyte the DMPC lipids carried about one unit of charge per 100 lipid molecules. The presence of this surface charge made it impossible to observe an effective charge density recently predicted for dipole layers near a dielectric when immersed in an electrolyte. A discrepancy between the theoretical results and the data at short separations was interpreted in terms of a decrease in the surface charge with separation distance.

An optimized model for rat liver perfusion studies.

Conditions which influence the viability, integrity, and extraction efficiency of the isolated perfused rat liver were examined to establish optimal conditions for subsequent work in reperfusion injury studies including the choice of buffer, use of oncotic agents, hematocrit, perfusion flow rate, and pressure. Rat livers were perfused with MOPS-buffered Ringer solution with or without erythrocytes. Perfusates were collected and analyzed for blood gases, electrolytes, enzymes, radioactivity in MID studies, and lignocaine in extraction studies. Liver tissue was sampled for histological examinations, and wet:dry weight of the liver was also determined. MOPS-buffered Ringer solution was found to be superior to Krebs bicarbonate buffer, in terms of pH control and buffering capacity, especially during any prolonged period of liver perfusion. A pH of 7. 2 is chosen for perfusion since this is the physiological pH of the portal blood. The presence of albumin was important as an oncotic agent, particularly when erythrocytes were used in the perfusate. Perfusion pressure, resistance, and vascular volume are flow-dependent and the inclusion of erythrocytes in the perfusate substantially altered the flow characteristics for perfusion pressure and resistance but not vascular volume. Lignocaine extraction was relatively flow-independent. Perfusion injury as defined by enzyme release and tissue fine structure was closely related to the supply of O2. The optimal conditions for liver perfusion depend upon an adequate supply of oxygen. This can be achieved by using either erythrocyte-free perfusate at a flow rate greater than 6 ml/min/g liver or a 20% erythrocyte-containing perfusate at 2 ml/min/g.

Modeling and measuring the elastic properties of an archaeal surface, the sheath of Methanospirillum hungatei, and the implication of methane production.

We describe a technique for probing the elastic properties of biological membranes by using an atomic force microscope (AFM) tip to press the biological material into a groove in a solid surface. A simple model is developed to relate the applied force and observed depression distance to the elastic modulus of the material. A measurement on the proteinaceous sheath of the archaebacterium Methanospirillum hungatei GP1 gave a Young's modulus of 2 x 10(10) to 4 x 10(10) N/m2. The measurements suggested that the maximum sustainable tension in the sheath was 3.5 to 5 N/m. This finding implied a maximum possible internal pressure for the bacterium of between 300 and 400 atm. Since the cell membrane and S-layer (wall) which surround each cell should be freely permeable to methane and since we demonstrate that the sheath undergoes creep (expansion) with pressure increase, it is possible that the sheath acts as a pressure regulator by stretching, allowing the gas to escape only after a certain pressure is reached. This creep would increase the permeability of the sheath to diffusible substances.

Theory of electrostatic effects in soft biological interfaces using atomic force microscopy.

We calculated the electrostatic force between a planar interface, such as a planar-supported lipid bilayer membrane, and the tip of a stylus on which another lipid bilayer or some other biomacromolecular system might be deposited. We considered styli with rounded tips as well as conical tips. To take into account the effect of dynamical hydrogen-bonded structures in the aqueous phase, we used a theory of nonlocal electrostatics. We used the Derjaguin approximation and identified the systems for which its use is valid. We pointed out where our approach differs from previous calculations and to what extent the latter are inadequate. We found that 1) the nonlocal interactions have significant effects over distances of 10-15 A from the polar zone and that, at the surface of this zone, the effect on the calculated force can be some orders of magnitude; 2) the lipid dipoles and charges are located a distance L from the hydrophobic layer in the aqueous medium and this can have consequences that may not be appreciated if it is ignored; 3) dipoles, located in the aqueous region, can give rise to forces even though the polar layer is unchanged, and if this is ignored the interpretation of force data can be erroneous if an attempt is made to rationalize an observed force with a knowledge of an uncharged surface; 4) the shape of the stylus tip can be very important, and a failure to take this into account can result in incorrect conclusions, a point made by other workers; and 5) when L is nonzero, the presence of charges and dipoles can yield a force that can be nonmonotonic as a function of ionic concentration.

Transmission electron microscopy, scanning tunneling microscopy, and atomic force microscopy of the cell envelope layers of the archaeobacterium Methanospirillum hungatei GP1.

Methanospirillum hungatei GP1 possesses paracrystalline cell envelope components including end plugs and a sheath formed from stacked hoops. Both negative-stain transmission electron microscopy (TEM) and scanning tunneling microscopy (STM) distinguished the 2.8-nm repeat on the outer surface of the sheath, while negative-stain TEM alone demonstrated this repeat around the outer circumference of individual hoops. Thin sections revealed a wave-like outer sheath surface, while STM showed the presence of deep grooves that precisely defined the hoop-to-hoop boundaries at the waveform nodes. Atomic force microscopy of sheath tubes containing entrapped end plugs emphasized the end plug structure, suggesting that the sheath was malleable enough to collapse over the end plugs and deform to mimic the shape of the underlying structure. High-resolution atomic force microscopy has revised the former idea of end plug structure so that we believe each plug consists of at least four discs, each of which is approximately 3.5 nm thick. PT shadow TEM and STM both demonstrated the 14-nm hexagonal, particulate surface of an end plug, and STM showed the constituent particles to be lobed structures with numerous smaller projections, presumably corresponding to the molecular folding of the particle.

High-resolution topography of the S-layer sheath of the archaebacterium Methanospirillum hungatei provided by scanning tunneling microscopy.

The inner and outer surfaces of the sheath of Methanospirillum hungatei GP1 have been imaged for the first time by using a bimorph scanning tunneling microscope (STM) on platinum-coated or uncoated specimens to a nominal resolution in height of ca. 0.4. nm. Unlike more usual types of microscopy (e.g., transmission electron microscopy), STM provided high-resolution topography of the surfaces, giving good depth detail which confirmed the sheath to be a paracrystalline structure possessing minute pores and therefore impervious to solutes possessing a hydrated radius of greater than 0.3 nm. STM also confirmed that the sheath consisted of a series of stacked hoops approximately 2.5 nm wide which were the remnants of the sheath after treatment with 2% (wt/vol) sodium dodecyl sulfate-2% (vol/vol) beta-mercaptoethanol (pH 9.0). No topographical infrastructure could be seen on the sides of the hoops. This research required the development of a new long-range STM capable of detecting small particles such as bacteria on graphite surfaces as well as a new "hopping" STM mode which did not deform the poorly conducting bacterial surface during high-resolution topographical analysis.