Experimental demonstration of rainbow trapping of elastic waves in two-dimensional axisymmetric phononic crystal platesa).

Structures with specific graded geometries or properties can cause spatial separation and local field enhancement of wave energy. This phenomenon is called rainbow trapping, which manifests itself as stopping the propagation of waves at different locations according to their frequencies. In acoustics, most research on rainbow trapping has focused on wave propagation in one dimension. This research examined the elastic wave trapping performance of a two-dimensional (2D) axisymmetric grooved phononic crystal plate structure. The performance of the proposed structure is validated using numerical simulations based on finite element analysis and experimental measurements using a laser Doppler vibrometer. It is found that rainbow trapping within the frequency range of 165-205 kHz is achieved, where elastic waves are trapped at different radial distances in the plate. The results demonstrate that the proposed design is capable of effectively capturing elastic waves across a broad frequency range of interest. This concept could be useful in applications such as filtering and energy harvesting by concentrating wave energy at different locations in the structure.

Molecular Weight Controls Interactions between Plastic Deformation and Fracture in Cold Spray of Glassy Polymers.

Polymer cold spray has gained considerable attention as a novel manufacturing process. A promising aspect of this technology involves the ability to deposit uniform polymer coatings without the requirements of solvent and/or high-temperature conditions. The present study investigates the interplay between shear instability, often considered to be the primary mechanism for bond formation, and fracture, as a secondary energy dissipation mechanism, collectively governing the deposition of glassy thermoplastics on similar and dissimilar substrates. A hybrid experimental-computational approach is utilized to explore the simultaneous effects of several interconnected phenomena, namely the particle-substrate relative deformability, molecular weights, and the resultant yielding versus fracture of polystyrene particles, examined herein as a model material system. The computational investigations are based on constitutive plasticity and damage equations determined and calibrated based on a statistical data mining approach applied to a wide collection of previously reported stress-strain and failure data. Results obtained herein demonstrate that the underlying adhesion mechanisms depend strongly on the molecular weight of the sprayed particles. It is also shown that although the plastic deformation and shear instability are still the primary bond formation mechanisms, the molecular-weight-dependent fracture of the sprayed glassy polymers is also a considerable phenomenon capable of significantly affecting the deposition process, especially in cases involving the cold spray of soft thermoplastics on hard substrates. The strong interplay between molecular-weight-dependent plastic yielding and fracture in the examined system emphasizes the importance of molecular weight as a critical variable in the cold spray of glassy polymers, also highlighting the possibility of process optimization by proper feedstock selection.

Nondestructive test of brazed cooling tubes of prototype bolometer camera housing using active infrared thermography.

The active infrared thermography technique is used for assessing the brazing quality of an actively cooled bolometer camera housing developed for steady state superconducting tokamak. The housing is a circular pipe, which has circular tubes vacuum brazed on the periphery. A unique method was adopted to monitor the temperature distribution on the internal surface of the pipe. A stainless steel mirror was placed inside the pipe and the reflected IR radiations were viewed using an IR camera. The heat stimulus was given by passing hot water through the tubes and the temperature distribution was monitored during the transient phase. The thermographs showed a significant nonuniformity in the brazing with a contact area of around 51%. The thermography results were compared with the x-ray radiographs and a good match between the two was observed. Benefits of thermography over x-ray radiography testing are emphasized.

Diamagnetic flux measurement in Aditya tokamak.

Measurements of diamagnetic flux in Aditya tokamak for different discharge conditions are reported for the first time. The measured diamagnetic flux in a typical discharge is less than 0.6 mWb and therefore it has required careful compensation for various kinds of pick-ups. The hardware and software compensations employed in this measurement are described. We introduce compensation of a pick-up due to plasma current of less than 20 kA in short duration discharges, in which plasma pressure gradient is supposed to be negligible. The flux measurement during radio frequency heating is also presented in order to validate compensation.