Low concentration of peroxymonosulfate coupled with visible light triggers oxygen reactive species generation over constructed Bi25FeO40/BiOCl Z-scheme heterojunction for various tetracycline antibiotics removal.

Photocatalytic peroxymonosulfate (PMS) oxidation systems demonstrate significant potential and promising prospects through the interconnection of photocatalytic and PMS oxidation for simultaneously achieving efficient pollutant removal and reduction of PMS dosage, which prevents resource wastage and secondary pollution. In this study, a Z-scheme Bi25FeO40/BiOCl (BOFC) heterojunction was constructed to carry out the photocatalytic PMS oxidation process for tetracyclines (TCs) pollutants at low PMS concentrations (0.08 mM). The photocatalytic PMS oxidation rate of Bi25FeO40/BiOCl composites for tetracycline hydrochloride (TCH), chlortetracycline (CTC), oxytetracycline (OTC) and doxycycline (DXC) reaches 86.6%, 83.6%, 86.7%, and 88.0% within 120 min. Simultaneously, the BOFC/PMS system under visible light (Vis) equally displayed the practical application prospects for the solo and mixed simulated TCs antibiotics wastewater. Based on the electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) valence band spectrum, a Z-scheme electron migration pathway was proposed to elucidate the mechanism underlying the performance enhancement of BOFC composites. Bi25FeO40 in BOFC composites can serve as active site for activating PMS by the formation of Fe3+/Fe2+ cycle. Toxicity estimation software tool (T.E.S.T.) and mung beans planting experiment demonstrates that BOFC/PMS/Vis system can reduce toxicity of TCs wastewater. Therefore, BOFC/PMS/Vis system achieves efficient examination in different water environments and efficient utilization of PMS, which displays a scientific reference for achieving environmentally-friendly and resource-saving handling processes.

Corrigendum: Getting pregnant with congenital adrenal hyperplasia: assisted reproduction and pregnancy complications. A systematic review and meta-analysis.

[This corrects the article DOI: 10.3389/fendo.2022.982953.].

Effect of tamoxifen in patients with thin endometrium who underwent frozen-thawed embryo transfer cycles: a retrospective study.

Introduction: Thin endometrium leads to an impaired implantation rate. The aim of the study is to compare the clinical outcomes of tamoxifen (TAM) and hormone replacement therapy (HRT) used in patients with thin endometrium (<7mm) in frozen-thawed embryo transfer (FET)cycles. Methods: A total of 176 FET cycles with thin endometrium were retrospectively analyzed in our center from Jan 2020 to May 2022. According to patients' own will, 112 patients were allocated to the HRT group and 64 patients chose the TAM protocol. Clinical outcomes were compared between two groups. Result: The duration of treatment was shorter in the TAM group(12.03±2.34d) than the HRT group (16.07±2.52 d), which was statistically different (p<0.05). The endometrial thickness on the transfer day of the TAM group (7.32±1.28 mm) was significantly thicker than that of the HRT group (6.85±0.89mm, p<0.05). The clinical pregnancy rate of the TAM group (50.0%) was higher than that of the HRT group (36.6%), but there was no significant difference (p >0.05). The early miscarriage rate was significantly lower in the TAM group compared with the HRT group (5.9% Vs 26.8%, adjusted OR 0.10, p<0.05), while the live birth rate was higher in the TAM group (46.9% Vs 26.8%, adjusted OR 2.24, p<0.05) compared with the HRT group. Conclusion: For patients with thin endometrium, TAM effectively improved the endometrial thickness and increased the live birth rate. TAM can be used as an alternative protocol for patients with thin endometrium.

Elevated adipose differentiation-related protein level in ovariectomized mice correlates with tissue-specific regulation of estrogen.

OBJECTIVE: Redistribution of adipose tissue in the abdomen during the menopausal transition is attributable mostly to estrogen drop with aging. Adipose differentiation-related protein (ADRP), a major component of lipid droplets, is closely related to the onset of lipid accumulation. We hypothesized that estrogen exerted its tissue-specific effect in reducing abdominal fat accumulation by regulation of ADRP. METHODS: Twenty-four female C57/BL6 mice aged 8 weeks were randomly divided into 3 groups: sham operation (Sham), bilateral ovariectomy (OVX), and OVX plus 17ß-estradiol (OVX + E2). After being fed 8 weeks of a high-fat diet, plasma lipid profiles including total cholesterol (TC), total triglyceride (TG), low-density lipoprotein cholesterol (LDL-C), and high-density lipoprotein cholesterol (HDL-C) levels, body weight gain, visceral, and subcutaneous adipose tissue, adipocyte size, and ADRP expression were measured. RESULTS: In comparison to sham-operated mice, OVX mice presented a weight gain with higher plasma TC, TG, LDL-C levels, and lower HDL-C levels. E2 supplement ameliorated the increase in weight and lipid profiles. Elevated ADRP expression was observed in visceral adipose tissue of OVX mice, whereas treatment of estrogen suppressed the ADPR expression and reversed the fat accumulation in the abdomen. However, no significant difference of ADRP expression in subcutaneous adipose tissue was detected between sham, OVX, and OVX + E2 mice. CONCLUSIONS: Our findings suggested that enhanced ADRP expression in ovariectomized mice correlates with the tissue-specific regulation of estrogen, which may provide useful clues for further exploring the regulatory mechanism and corresponding anti-abdominal obesity treatment in postmenopausal women.

Getting pregnant with congenital adrenal hyperplasia: Assisted reproduction and pregnancy complications. A systematic review and meta-analysis.

Many patients with congenital adrenal hyperplasia (CAH) refrain from seeking pregnancy, suffer from infertility or worry about pregnancy complications, mainly due to genitalia abnormalities, anovulation, unreceptive endometrium and metabolic disturbances. Despite those challenges, many live births have been reported. In this systematic review, we focused on the key to successful assisted reproduction strategies and the potential pregnancy complications. We did a systematic literature search of Pubmed, Medline and Scopus for articles reporting successful pregnancies in CAH other than 21-hydroxylase deficiency, and found 25 studies reporting 39 pregnancies covering deficiency in steroidogenic acute regulatory protein, 17α-hydroxylase/17,20-lyase, 11ß-hydroxylase, P450 oxidoreductase, cytochrome b5 and 3ß-hydroxysteroid dehydrogenase. We summarized various clinical manifestations and tailored reproduction strategy for each subtype. Furthermore, a meta-analysis was performed to evaluate the pregnancy complications of CAH patients. A total of 19 cross-sectional or cohort studies involving 1311 pregnancies of classic and non-classic CAH patients were included. Surprisingly, as high as 5.5% (95% CI 2.3%-9.7%) of pregnancies were electively aborted, and the risk was significantly higher in those studies with a larger proportion of classic CAH than those with only non-classical patients (8.43% (4.1%-13.81%) VS 3.75%(1.2%-7.49%)), which called for better family planning. Pooled incidence of miscarriage was 18.2% (13.4%-23.4%) with a relative risk (RR) of 1.86 (1.27-2.72) compared to control. Glucocorticoid treatment in non-classical CAH patients significantly lowered the miscarriage rate when compared to the untreated group (RR 0.25 (0.13-0.47)). CAH patients were also more susceptible to gestational diabetes mellitus, with a prevalence of 7.3% (2.4%-14.1%) and a RR 2.57 (1.29-5.12). However, risks of preeclampsia, preterm birth and small for gestational age were not significantly different. 67.8% (50.8%-86.9%) CAH patients underwent Cesarean delivery, 3.86 (1.66-8.97) times the risk of the control group. These results showed that fertility is possible for CAH patients but special care was necessary when planning, seeking and during pregnancy. Systematic Review Registration: PROSPERO https://www.crd.york.ac.uk/PROSPERO/display_record.php?RecordID=342642, CRD42022342642.

It is not worth postponing frozen embryo transfers after oocyte pickup: A retrospective cohort study based on propensity score matching.

This study was to explore whether postponing frozen embryo transfers (FET) after oocyte pickup (OPU) improves clinical and neonatal outcomes. From May 2018 to Dec 2020, a total of 1109 patients underwent their first OPU cycles adopting a non-selective freeze-all policy were included in this retrospective cohort study. In the immediate group (n=219), patients underwent FET in the first menstrual cycle after OPU, and patients in the postponed group (n=890) waited for more than 1 menstrual cycle after OPU to perform FET. A propensity score matching (PSM) model was used to evaluate the clinical outcomes and neonatal outcomes between the two groups. There were 209 patients in the immediate group and 499 patients in the postponed one after PSM. Patients waited for a significantly shorter period for FET in the immediate group (30.74 ± 3.85 days) compared with the postponed group (80.39 ± 26.25 days, P<0.01). The clinical pregnancy rate (CPR) and live birth rate (LBR) in the immediate group were 58.4% and 48.3%, respectively, which were comparable to those of the postponed one (58.1%, 49.7%, P > 0.05). No statistical significance was found in the average birth weight (3088.82 ± 565.35 g vs 3038.64 ± 625.78 g, P > 0.05) and height (49.08 ± 1.87 cm vs 49.30 ± 2.52 cm) of neonates between the two groups. The gender ratio, the incidence of macrosomia and low birth weight did not differ significantly between the two groups. In conclusion, postponing FET does not improve clinical and neonatal outcomes. If patients have no contraindications, FETs should be carried out immediately after OPU.

Oxygen vacancy triggering the broad-spectrum photocatalysis of bismuth oxyhalide solid solution for ciprofloxacin removal.

The construction of a broad-spectrum photocatalytic system is of great significance for maximizing the utilization of solar energy. Herein, a surface oxygen vacancy triggering high-efficient broad-spectrum BiOCl0.5I0.5 solid solution photocatalyst was successfully fabricated via a one-pot solvothermal process. The UV-vis diffuse reflectance spectra revealed that the introduced oxygen vacancy appears to extend the absorption region of BiOCl0.5I0.5 to a wider wavelength range. Under λ > 580 nm light irradiation for 5 h, nearly 85.6% ciprofloxacin was degraded by BiOCl0.5I0.5 with rich oxygen vacancy, the ciprofloxacin removal efficiency was 3.4 times higher than that with less oxygen vacancy. Moreover, the density functional theory calculations and photoelectrochemical characterizations indicated the excited electrons would preferentially transfer to the new defect level induced by oxygen vacancy, thus greatly reducing the recombination of photogenerated carriers. This work tends to deepen the understanding of defect engineering in steering the construction of broad-spectrum Bi-based solid solution photocatalysts as well as its application in environmental remediation.

The outcomes of sequential embryo transfer in patients undergoing in vitro fertilization with frozen-thawed embryos: A retrospective study.

AIM: To explore whether sequential embryo transfer benefits patients with repeated implantation failure (RIF) undergoing frozen-thawed embryo transfer (FET) cycles. METHODS: We included 311 patients with a history of RIF in this retrospective study. We did sequential transfers with a cleavage embryo on day 3 and a blastocyst on day 5 in 77 patients; blastocyst transfers with two blastocysts on day 5 in 80 patients; and cleavage embryo transfers with two cleavage embryos on day 3 in 154 patients. We compared clinical outcomes between the three groups. RESULTS: The clinical pregnancy rate was comparable between the blastocyst transfer group (48.8%), the sequential transfer group(48.1%) and the cleavage embryo transfer group (48.1%). There was no statistically significant difference found (p > 0.05). The ongoing pregnancy and multipregnancy rates were also comparable between the three groups (p > 0.05). The early miscarriage rate was significantly higher in the sequential transfer group (32.4%) compared with the blastocyst group (12.8%) and the cleavage embryo group (12.2%) (p < 0.05). However, after adjusting for confounders, there was no significant difference in early miscarriage rates in the sequential transfer group compared with the blastocyst group (odds ratio [OR], 2.97; 95% confidence interval [CI], 0.85-9.24; p = 0.07) and the cleavage embryo group (OR, 3.03; 95% CI, 0.94-8.06; p = 0.08). CONCLUSIONS: Sequential embryo transfer failed to improve clinical outcomes for patients with RIF.

Heterostructured Bi-Cu2S nanocrystals for efficient CO2 electroreduction to formate.

The electrochemical CO2 reduction reaction (ECO2RR) driven by renewable electricity holds promise to store intermittent energy in chemical bonds, while producing value-added chemicals and fuels sustainably. Unfortunately, it remains a grand challenge to simultaneously achieve a high faradaic efficiency (FE), a low overpotential, and a high current density of the ECO2RR. Herein, we report the synthesis of heterostructured Bi-Cu2S nanocrystals via a one-pot solution-phase method. The epitaxial growth of Cu2S on Bi leads to abundant interfacial sites and the resultant heterostructured Bi-Cu2S nanocrystals enable highly efficient ECO2RR with a largely reduced overpotential (240 mV lower than that of Bi), a near-unity FE (>98%) for formate production, and a high partial current density (2.4- and 5.2-fold higher JHCOO- than Cu2S and Bi at -1.0 V vs. reversible hydrogen electrode, RHE). Density functional theory (DFT) calculations show that the electron transfer from Bi to Cu2S at the interface leads to the preferential stabilization of the formate-evolution intermediate (*OCHO).

Dual modulation steering electron reducibility and transfer of bismuth molybdate nanoparticle to boost carbon dioxide photoreduction to carbon monoxide.

Owing to the exorbitant CO2 activation energy and unsatisfactory photogenerated charge separation efficiency, CO2 photoconversion still faces enormous challenges. In this study, a directional electron transfer channel has been established by decorating N-doped carbon quantum dots (N-CQDs) on the surface of Bi4MoO9 nanoparticles to ensure that more active electrons can participate in the CO2 reduction. The conduction band of Bi4MoO9 nanoparticles is calculated to be -1.55 eV versus the normal hydrogen electrode (NHE), pH = 7, which is negative enough to attain the photocatalytic CO2 reduction potential of -0.53 eV versus NHE, pH = 7. CO2 adsorption curves and in situ Fourier transform infrared spectra reveal that N-CQDs facilitate surface CO2 adsorption and activation, as well as CO desorption. In addition, steady-state photoluminescence and photoelectrochemical tests prove that the charge separation efficiency can be greatly enhanced by constructing N-CQDs/Bi4MoO9 composites. In the presence of pure water, N-CQDs/Bi4MoO9-2 composite achieved a CO yield of 16.22 µmol g-1 after 5 h Xe light illumination, which was 3.24 times higher than that of pure Bi4MoO9 (4.98 µmol g-1). This study offers a distinctive approach to the optimization of Bi4MoO9 photocatalysts and their application in energy conversion.

Confrontment and solution to gonadotropin resistance and low oocyte retrieval in in vitro fertilization for type I BPES: a case series with review of literature.

BACKGROUND: FOXL2 mutations in human cause Blepharophimosis, ptosis, and epicanthus inversus syndrome (BPES). While type II BPES solely features eyelid abnormality, type I BPES involves not only eyelid but also ovary, leading to primary ovarian insufficiency (POI) and female infertility. Current mainstream reproductive option for type I BPES is embryo or oocyte donation. Attempts on assisted reproductive technology (ART) aiming biological parenthood in this population were sparse and mostly unsuccessful. CASE PRESENTATION: Two Chinese type I BPES patients with low anti-müllerian hormone (AMH) and elevated follicle stimulating hormone (FSH) presented with primary infertility in their early 30s. Genetic studies confirmed two heterozygous duplication mutations that were never reported previously in East Asian populations. They received in vitro fertilization (IVF) treatment and both exhibited resistance to gonadotropin and difficulty in retrieving oocytes in repeated cycles. Doubled to quadrupled total gonadotropin doses were required to awaken follicular response. Patient 1 delivered a baby girl with the same eyelid phenotype and patient 2 had ongoing live intrauterine pregnancy at the time of manuscript submission. CONCLUSIONS: This is the second reported live birth of biological offspring in type I BPES patients, and first success using IVF techniques. It confirmed that ART is difficult but feasible in type I BPES. It further alerts clinicians and genetic counsellors to type female BPES patients with caution in view of the precious and potentially narrowed reproductive window.

Electrocatalysis in confined spaces: interplay between well-defined materials and the microenvironment.

Catalysis in a confined space has attracted much attention due to the simultaneously designable nature of active sites and their microenvironment, leading to a broad spectrum of highly efficient chemical conversion schemes. Recent work has extended the scope of confined catalysis to electrochemical reactions. Mechanistic studies suggest that the confined environment in electrocatalysis can modulate mechanical, electronic, and geometric effects, stabilizing important charge-transfer intermediates and promoting reaction kinetics. In this minireview, we first discuss the fundamental concepts of confined catalysis by summarizing density functional theory (DFT) calculations and experimental investigations. We then present the rational design and applications of space-confined electrocatalysts with emphasis on the confined environment provided by carbon-based materials. We specifically focus on metal-based materials confined in carbon nanotubes (CNTs) and their applications in emerging electrochemical reactions including the oxygen reduction reaction (ORR), water-splitting reactions, carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Finally, the existing challenges, opportunities, and future directions of electrocatalysis in confined spaces are highlighted.

Perinatal outcomes in dichorionic diamniotic twins with multifetal pregnancy reduction versus expectant management: A systematic review and meta-analysis.

BACKGROUND: Published findings on perinatal outcomes of multifetal pregnancy reduction (MPR) of dichorionic diamniotic (DCDA) twin pregnancy to singleton are controversial. We performed a meta-analysis to appraise the effects of MPR of DCDA twin pregnancy versus expectant management on perinatal outcomes. METHODS: Four electronic databases were searched from their inception to June 15, 2019, to identify publications that appraised MPR before 15 weeks of gestation. Studies reporting perinatal outcomes of both MPR of DCDA twin pregnancy to singleton and expectant management were considered. The relative risks (RRs) and mean differences with 95% confidence intervals (CIs) were pooled using a random-effects model. RESULTS: Six studies involving 7398 participants showed that MPR of DCDA twin pregnancy to singleton was associated with a lower risk of preterm birth (5 studies with 7297 participants; RR: 0.30, 95% CI: 0.22-0.40; P < .001) and higher birth weight (4 studies with 5763 participants; mean differences: 548.10 g, 95% CI: 424.04-672.15; P < .001) than expectant management; there was no difference in the occurrence of miscarriages (5 studies with 7355 participants; RR: 1.57, 95% CI: 0.90-2.75; P = .11). Sensitivity analysis showed that all the results were stable and reliable, with the omission of 2 studies with serious risk of bias. CONCLUSION: Compared to expectant management, MPR of DCDA twin pregnancy to singleton prevents preterm birth and low birth weight, without increasing the risk of miscarriages. Regarding perinatal morbidity related to preterm birth, MPR can be reserved as a remediation measure to improve the perinatal outcomes of DCDA twin pregnancies.

Ionic liquid induced mechanochemical synthesis of BiOBr ultrathin nanosheets at ambient temperature with superior visible-light-driven photocatalysis.

Ultrathin BiOBr nanosheets have been prepared via an ionic liquid induced mechanochemical synthesis method at ambient temperature for the first time using 1-hexadecyl-3-methy-limidazolium bromine ([C16mim]Br). Transmission electron microscope and atomic force microscope images show that the ultrathin BiOBr nanosheets possessed an average diameter of approximately 200-300 nm with a thickness of 3-4 nm. For comparison, KBr was selected as Br source for the preparation of BiOBr nanosheets and the experimental results demonstrate that the ionic liquid and mechanical ball milling method had a significant impact on the fabrication of nanosheet structures. Compared with the as-prepared control samples, the ultrathin BiOBr nanosheet photocatalyst exhibited significantly increased photocatalytic performance for the removal of organic pollutants. A possible mechanism for this enhanced activity was proposed based on the shorter diffusion distance for charge transfer provided by the ultrathin nanosheet structure, which inhibits the recombination of photogenerated charge carriers. This work not only opens up a possible pathway for the large-scale industrial preparation of BiOX (X = Cl, Br, I) with superior photocatalytic activity, but also provides new insight into environmental restoration and energy conversion.

Construction of ultrathin MoS2/Bi5O7I composites: Effective charge separation and increased photocatalytic activity.

Ultrathin MoS2 nanosheet hybridized Bi5O7I (MoS2/Bi5O7I) nanorods were synthesized via a reactable ionic liquid assisted solvothermal process for the first time. The photocatalytic activity of MoS2/Bi5O7I nanorods was determined by photodegrading bisphenol A (BPA), tetracycline hydrochloride (TC) and ciprofloxacin (CIP) under visible light irradiation. Experimental results showed that MoS2/Bi5O7I owned the excellent photocatalytic properties and photostability. The efficient visible light driven photocatalytic performance was due to a larger specific surface area of MoS2, which increased the close interfacial contact between pollutants and photocatalysts. Meanwhile, the introduction of ultrathin MoS2 nanosheet was conducive to the separation and utilization of photoinduced charge carriers, thus further suppressed high recombination rate in pure Bi5O7I nanorods. Moreover, a possible charge transfer path in MoS2/Bi5O7I composite material was also put forward.

Bismuth Vacancy-Tuned Bismuth Oxybromide Ultrathin Nanosheets toward Photocatalytic CO2 Reduction.

Surface defects in semiconductors have a significant role to tune the photocatalytic reactions. However, the dominant studied defect type is oxygen vacancy, and metal cation vacancies are seldom explored. Herein, bismuth vacancies are engineered into BiOBr through ultrathin structure control and employed to tune photocatalytic CO2 reduction. VBi-BiOBr ultrathin nanosheets deliver a high selective CO generation rate of 20.1 µmol g-1 h-1 in pure water, without any cocatalyst, photosensitizer, and sacrificing reagent, roughly 3.8 times higher than that of BiOBr nanosheets. The increased CO2 reduction activity is ascribed to the tuned electronic structure, optimized CO2 adsorption, activation, and CO desorption process over VBi-BiOBr ultrathin nanosheets. This work offers new opportunities for designing surface metal vacancies to optimize the CO2 photoreduction performances.

Oxygen vacancies modulated Bi-rich bismuth oxyiodide microspheres with tunable valence band position to boost the photocatalytic activity.

How to optimize the photogenerated electron-hole pairs' separation efficiency and redox performance of defective photocatalysts is still a concern for photocatalysis research. In this study, rich oxygen vacancy was introduced in Bi7O9I3 microsphere (Bi7O9I3-OVR) via a facile ionic liquid assisted solvothemal method to investigate the charge separation and photocatalytic performance. To demonstrate the dominant role of the introduced oxygen vacancy, partial oxygen vacancy in Bi7O9I3 microsphere was repaired by post-calcination treatment (Bi7O9I3-OVL), which was confirmed by electron paramagnetic resonance (EPR). The experimental results indicated the introduction of oxygen vacancy boosted the holes mobility and electrons reduction of Bi7O9I3, then the increased charge carriers' separation efficiency and high concentration of produced reactive oxygen species was realized. Benefiting from these, the Bi7O9I3-OVR microsphere exhibited a better photocatalytic oxygen evolution performance than Bi7O9I3-OVL, and the oxygen evolution rate was up to 2.66 µmol m-2 h-1.

Defect-Rich Bi12 O17 Cl2 Nanotubes Self-Accelerating Charge Separation for Boosting Photocatalytic CO2 Reduction.

Solar-driven reduction of CO2 , which converts inexhaustible solar energy into value-added fuels, has been recognized as a promising sustainable energy conversion technology. However, the overall conversion efficiency is significantly limited by the inefficient charge separation and sluggish interfacial reaction dynamics, which resulted from a lack of sufficient active sites. Herein, Bi12 O17 Cl2 superfine nanotubes with a bilayer thickness of the tube wall are designed to achieve structural distortion for the creation of surface oxygen defects, thus accelerating the carrier migration and facilitating CO2 activation. Without cocatalyst and sacrificing reagent, Bi12 O17 Cl2 nanotubes deliver high selectivity CO evolution rate of 48.6 µmol g-1 h-1 in water (16.8 times than of bulk Bi12 O17 Cl2 ), while maintaining stability even after 12 h of testing. This paves the way to design efficient photocatalysts with collaborative optimizing charge separation and CO2 activation towards CO2 photoreduction.

Enhanced reactive oxygen species activation for building carbon quantum dots modified Bi5O7I nanorod composites and optimized visible-light-response photocatalytic performance.

Novel Carbon quantum dots modified Bi5O7I (CQDs/Bi5O7I) nanorod composites were prepared via an ionic liquid 1-ethyl-3-methylimidazolium iodide ([Emim]I) assisted solvothermal method for the first time. Series of characterization methods were used to explore the structural composition, morphology and optical properties of as-prepared CQDs/Bi5O7I photocatalysts. Compared with pure Bi5O7I nanorod, CQDs/Bi5O7I composites exhibited the increased the specific surface area and visible light capture capability so as to expose more active sites and make full use of sunlight. Meanwhile, the tight contact between CQDs and Bi5O7I was beneficial for the rapid separation and migration of photogenerated electron-hole pairs to further suppress the high recombination rate in the pure Bi5O7I nanorods. More generated superoxide radicals (O2-) was detected by electron spin resonance analysis. In addition, the possible mechanism for the enhanced photocatalytic performance of CQDs/Bi5O7I composites was put forward.

Ionic liquid-induced double regulation of carbon quantum dots modified bismuth oxychloride/bismuth oxybromide nanosheets with enhanced visible-light photocatalytic activity.

The efficient separation of photoexcited electron-hole pairs acts as a significant factor and challenge for the enhanced photocatalytic activity of the photocatalyst. To pursue higher photocatalytic activity, carbon quantum dots (CQDs) modified bismuth oxychloride (BiOCl)/bismuth oxybromide (BiOBr) nanosheet photocatalyst has first been synthesized via an in situ ionic liquid-induced strategy. The bridge function of the ionic liquid ensures the uniform dispersal of CQDs on the surface of the BiOCl/BiOBr material. After the introduction of CQDs, the CQDs/BiOCl/BiOBr composite photocatalyst displayed enhanced photocatalytic activity for the photodegradation of several different types of organic contaminants such as rhodamine B, tetracycline hydrochloride, ciprofloxacin, and bisphenol A under the irradiation of visible light, and the BiOCl/BiOBr material loading with 5 wt% CQDs showed the best photocatalytic performance. The characterization results revealed that the introduction of CQDs could simultaneously improve the visible light absorption properties and separation efficiency of photoexcited electron-hole pairs. The electron spin resonance and radical quenching experiments demonstrated that during the photocatalytic reactions, holes and superoxide radicals were the main active species involved in the degradation of the contaminants, and the possible photocatalytic mechanism is presented. Therefore, this work provides an efficient pathway for the improved activity of the photocatalyst.