Structural performance of the concrete-filled tube column with internal triangular units subjected to axial compression.

This study introduces a novel concrete-filled tube (CFT) column system featuring a steel tube comprised of four internal triangular units. The incorporation of these internal triangular units serves to reduce the width-thickness ratio of the steel tube and augment the effective confinement area of the infilled concrete. This design enhancement is anticipated to result in improved structural strength and ductility, contributing to enhanced overall performance and sustainability. To assess the effectiveness of the newly proposed column system, a full-scale test was conducted on five square steel tube column specimens subjected to axial compression. Among these specimens, two adhered to the conventional steel tube column design, while the remaining three featured the new CFT columns with internal triangular units. The shape of the CFT column, the presence of infilled concrete and the presence of openings on the ITUs were considered as test parameters. The test results reveal that the ductility of the newly proposed CFT column system exhibited a minimum 30% improvement compared to the conventional CFT column. In addition, the initial stiffness and axial compressive strength of the new system were found to be comparable to those of the conventional CFT column.

Natural Cellulose-Based Multifunctional Nanofibers for the Effective Removal of Particulate Matter and Volatile Organic Compounds.

Multifunctional nanofibers for particulate matter (PM) and volatile organic compounds (VOCs) removal from the indoor atmospheric environment were manufactured from eco-friendly natural cellulose materials via electrospinning using an optimized solvent system containing 1-ethyl-3-methylimidazolium acetate (EmimAC) and dimethylformide (DMF) in a 3:7 volume ratio. EmimAC improved the cellulose stability, whereas DMF improved the electrospinnability of the material. Various cellulose nanofibers were manufactured using this mixed solvent system and characterized according to the cellulose type, such as hardwood pulp, softwood pulp, and cellulose powder, and cellulose content ranging from 6.0-6.5 wt%. The correlation between the precursor solution alignment and electrospinning properties indicated an optimal cellulose content of 6.3 wt% for all cellulose types. The hardwood pulp-based nanofibers possessed the highest specific surface area and exhibited high efficiency for eliminating both PM and VOCs, with a PM2.5 adsorption efficiency of 97.38%, PM2.5 quality factor of 0.28, and toluene adsorption of 18.4 mg/g. This study will contribute to the development of next-generation eco-friendly multifunctional air filters for indoor clean-air environments.

Highly Porous-Cellulose-Acetate-Nanofiber Filters Fabricated by Nonsolvent-Induced Phase Separation during Electrospinning for PM2.5 Capture.

Highly porous-cellulose-acetate (CA) nanofibers were prepared by an electrospinning process based on a nonsolvent-induced phase separation (NIPS) mechanism, and their PM2.5 capture efficiencies were evaluated. The NIPS condition during the electrospinning process was achieved by selecting appropriate good and poor solvents based on the Hansen solubility parameters of CA. N,N-dimethylacetamide (DMAc) was used as the good solvent, while dichloromethane (DCM), tetrahydrofuran (THF), and acetone were used as poor solvents. Porous-CA nanofibers were observed upon using the binary solvent systems of DCM:DMAc = 1:9, DCM:DMAc = 2:8, and THF:DMAc = 1:9, and the CA nanofibers formed using the DCM/DMAc system with DCM:DMAc = 1:9 were found to have the highest specific surface area of 1839 m2/g. Based on the optimized binary solvent system with DCM:DMAc = 1:9, porous-CA nanofibers were prepared and characterized according to the CA content in the electrospinning mixture. The results confirmed that a porous structure was formed well from the surface to the core of the nanofibers. The composition range of the ternary mixture of CA and two solvents capable of producing porous-CA nanofibers was mapped on a ternary phase diagram, and highly efficient PM2.5 capture with 98.2% efficiency was realized using porous-CA nanofibers obtained using a 10 wt.% CA solution. This work provides a new strategy for improving the efficiency of porous-nanofiber filters for PM2.5 capture.

Sintering Process Optimization for 3YSZ Ceramic 3D-Printed Objects Manufactured by Stereolithography.

A 3YSZ (3 mol% yttria-stabilized zirconia) ceramic green body with 50 vol% of ceramic content was 3D-printed by supportless stereolithography under optimal drying, debinding, and sintering conditions in order to achieve high strength and density. The viscosity and flowability of the ceramic nanocomposite resins were optimized by adjusting the amounts of non-reactive diluents. The ceramic 3D-printed objects have a high polymer content compared to ceramics samples manufactured by conventional manufacturing processes, and the attraction between layers is weak because of the layer-by-layer additive method. This causes problems such as layer separation and cracking due to internal stress generated when materials such as solvents and polymers are separated from the objects during the drying and debinding processes; therefore, the drying and debinding conditions of 3YSZ ceramic 3D-printed objects were optimized based on thermogravimetry-differential thermal analysis. The sintering conditions at various temperatures and times were analyzed using X-ray diffraction, SEM, and flexural strength analysis, and the body of the 3YSZ ceramic 3D-printed object that sintered at 1450 °C for 150 min had a relative density of 99.95% and flexural strength of 1008.5 MPa. This study widens the possibility of manufacturing ceramic 3D-printed objects with complex shapes, remarkable strength, and unique functionality, enabling their application in various industrial fields.

All-in-One Piezo-Triboelectric Energy Harvester Module Based on Piezoceramic Nanofibers for Wearable Devices.

An all-in-one energy harvester module comprising a top piezoelectric layer, a bottom piezoelectric layer, and a middle triboelectric layer was fabricated based on flexible piezoceramic nanofibers to serve as a power source for wearable devices. The top and bottom piezoelectric layers were manufactured by modularizing electrospun piezoceramic nanofibers with an interdigitated electrode, and the energy harvesting characteristics were maximized by laminating the single modules in z-axis array arrangements. The triboelectric layer was manufactured by attaching polydimethylsiloxane on both sides of an electrode layer, and the energy harvesting characteristics were controlled according to the surface roughness of the triboelectric modules. The output voltages of the individual energy harvester modules of the all-in-one module were individually or integrally measured by hand pressing the lower and upper parts of the module. The all-in-one energy harvester module generated a maximum voltage (power) of 253 V (3.8 mW), and the time required to charge a 0.1 µF capacitor to 25 V was 40 s. The results of a simulated energy harvesting experiment conducted on the all-in-one energy harvester module showed that 42 LED bulbs arranged in the shape of the "KICET" logo could be turned on in real time without charging, and a mini fan consuming a power of 3.5 W was operated after charging a 10 µF capacitor for 250 s. This work shows the potential of the all-in-one module as an ecofriendly flexible energy harvester for operating wearable devices.

Wearable Core-Shell Piezoelectric Nanofiber Yarns for Body Movement Energy Harvesting.

In an effort to fabricate a wearable piezoelectric energy harvester based on core-shell piezoelectric yarns with external electrodes, flexible piezoelectric nanofibers of BNT-ST (0.78Bi0.5Na0.5TiO3-0.22SrTiO3) and polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) were initially electrospun. Subsequently, core-shell piezoelectric nanofiber yarns were prepared by twining the yarns around a conductive thread. To create the outer electrode layers, the core-shell piezoelectric nanofiber yarns were braided with conductive thread. Core-shell piezoelectric nanofiber yarns with external electrodes were then directly stitched onto the fabric. In bending tests, the output voltages were investigated according to the total length, effective area, and stitching interval of the piezoelectric yarns. Stitching patterns of the piezoelectric yarns on the fabric were optimized based on these results. The output voltages of the stitched piezoelectric yarns on the fabric were improved with an increase in the pressure, and the output voltage characteristics were investigated according to various body movements of bending and pressing conditions.

Fabrication and Characterization of Aligned Flexible Lead-Free Piezoelectric Nanofibers for Wearable Device Applications.

Flexible lead-free piezoelectric nanofibers, based on BNT-ST (0.78Bi0.5Na0.5TiO3-0.22SrTiO3) ceramic and poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) copolymers, were fabricated by an electrospinning method and the effects of the degree of alignment in the nanofibers on the piezoelectric characteristics were investigated. The microstructure of the lead-free piezoelectric nanofibers was observed by field emission scanning electron microscope (FE-SEM) and the orientation was analyzed by fast Fourier transform (FFT) images. X-ray diffraction (XRD) analysis confirmed that the phase was not changed by the electrospinning process and maintained a perovskite phase. Polarization-electric field (P-E) loops and piezoresponse force microscopy (PFM) were used to investigate the piezoelectric properties of the piezoelectric nanofibers, according to the degree of alignment-the well aligned piezoelectric nanofibers had higher piezoelectric properties. Furthermore, the output voltage of the aligned lead-free piezoelectric nanofibers was measured according to the vibration frequency and the bending motion and the aligned piezoelectric nanofibers with a collector rotation speed of 1500 rpm performed the best.

A six-week course of bacillus Calmette-Guérin prophylaxis is insufficient to prevent tumor recurrence in nonmuscle invasive bladder cancer with strong-positive expression of p53.

OBJECTIVE: To determine the impact of p53 overexpression on tumor recurrence after bacillus Calmette-Guérin (BCG) intravesical therapy in patients with nonmuscle invasive bladder cancer (NMIBC). METHODS: Between January 1999 and December 2008, 275 patients who received six BCG intravesical instillations for NMIBC (transitional cell carcinoma) after transurethral resection were assessed for differences in outcomes according to the level of p53 overexpression. A multivariate logistic regression model was applied to assess the predictive capacity of variables for recurrence. Overexpression of p53 was determined using monoclonal p53-DO7 antibody. RESULTS: In 275 subjects, the recurrence rate was higher based on the level of p53 expression (p = 0.019). Based on multivariate analysis, a strong-positive p53 >60% (p = 0.031) and tumor grade (p = 0.015) were significant predictors for recurrence. Patients with a strong-positive p53 >60% had a much lower 5-year biochemical recurrence-free survival rate than patients with p53 ≤60% (72.1 vs. 31.5%, p < 0.001). CONCLUSIONS: Strong overexpression of p53 was predictive of recurrence in patients with NMIBC undergoing intravesical BCG treatment. A 6-week induction course of BCG alone is not sufficient to prevent recurrence in patients with NMIBC with high p53 expression; additional prophylactic strategies are needed for these patients.