Removal Performance and Mechanism of Emerging Pollutant Chloroquine Phosphate from Water by Iron and Magnesium Co-Modified Rape Straw Biochar.

Chloroquine phosphate (CQP) is effective in treating coronavirus disease 2019 (COVID-19); thus, its usage is rapidly increasing, which may pose a potential hazard to the environment and living organisms. However, there are limited findings on the removal of CQP in water. Herein, iron and magnesium co-modified rape straw biochar (Fe/Mg-RSB) was prepared to remove CQP from the aqueous solution. The results showed that Fe and Mg co-modification enhanced the adsorption efficiency of rape straw biochar (RSB) for CQP with the maximum adsorption capacity of 42.93 mg/g (at 308 K), which was about two times higher than that of RSB. The adsorption kinetics and isotherms analysis, as well as the physicochemical characterization analysis, demonstrated that the adsorption of CQP onto Fe/Mg-RSB was caused by the synergistic effect of pore filling, π-π interaction, hydrogen bonding, surface complexation, and electrostatic interaction. In addition, although solution pH and ionic strength affected the adsorption performance of CQP, Fe/Mg-RSB still had a high adsorption capability for CQP. Column adsorption experiments revealed that the Yoon-Nelson model better described the dynamic adsorption behavior of Fe/Mg-RSB. Furthermore, Fe/Mg-RSB had the potential for repeated use. Therefore, Fe and Mg co-modified biochar could be used for the remediation of CQP from contaminated water.

Efficient Adsorption of Tebuconazole in Aqueous Solution by Calcium Modified Water Hyacinth-Based Biochar: Adsorption Kinetics, Mechanism, and Feasibility.

The application of fungicides (such as tebuconazole) can impose harmful impacts on the ecosystem and humans. In this study, a new calcium modified water hyacinth-based biochar (WHCBC) was prepared and its effectiveness for removing tebuconazole (TE) via adsorption from water was tested. The results showed that Ca was loaded chemically (CaC2O4) onto the surface of WHCBC. The adsorption capacity of the modified biochar increased by 2.5 times in comparison to that of the unmodified water hyacinth biochar. The enhanced adsorption was attributed to the improved chemical adsorption capacity of the biochar through calcium modification. The adsorption data were better fitted to the pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by monolayer adsorption. It was found that liquid film diffusion was the main rate-limiting step in the adsorption process. The maximum adsorption capacity of WHCBC was 40.5 mg/g for TE. The results indicate that the absorption mechanisms involved surface complexation, hydrogen bonding, and π-π interactions. The inhibitory rate of Cu2+ and Ca2+ on the adsorption of TE by WHCBC were at 4.05-22.8%. In contrast, the presence of other coexisting cations (Cr6+, K+, Mg2+, Pb2+), as well as natural organic matter (humic acid), could promote the adsorption of TE by 4.45-20.9%. In addition, the regeneration rate of WHCBC was able to reach up to 83.3% after five regeneration cycles by desorption stirring with 0.2 mol/L HCl (t = 360 min). The results suggest that WHCBC has a potential in application for removing TE from water.

A Stable Fe-Zn Modified Sludge-Derived Biochar for Diuron Removal: Kinetics, Isotherms, Mechanism, and Practical Research.

To remove typical herbicide diuron effectively, a novel sludge-derived modified biochar (SDMBC600) was prepared using sludge-derived biochar (SDBC600) as raw material and Fe-Zn as an activator and modifier in this study. The physico-chemical properties of SDMBC600 and the adsorption behavior of diuron on the SDMBC600 were studied systematically. The adsorption mechanisms as well as practical applications of SDMBC600 were also investigated and examined. The results showed that the SDMBC600 was chemically loaded with Fe-Zn and SDMBC600 had a larger specific surface area (204 m2/g) and pore volume (0.0985 cm3/g). The adsorption of diuron on SDMBC600 followed pseudo-second-order kinetics and the Langmuir isotherm model, with a maximum diuron adsorption capacity of 17.7 mg/g. The biochar could maintain a good adsorption performance (8.88-12.9 mg/g) under wide water quality conditions, in the pH of 2-10 and with the presence of humic acid and six typical metallic ions of 0-20 mg/L. The adsorption mechanisms of SDMBC600 for diuron were found to include surface complexation, π-π binding, hydrogen bonding, as well as pore filling. Additionally, the SDMBC600 was tested to be very stable with very low Fe and Zn leaching concentration ≤0.203 mg/L in the wide pH range. In addition, the SDMBC600 could maintain a high adsorption capacity (99.6%) after four times of regeneration and therefore, SDMBC600 could have a promising application for diuron removal in water treatment.

Degradation of the typical herbicide atrazine by UV/persulfate: kinetics and mechanisms.

Atrazine (ATZ), a widely used herbicide, had received a significant amount of attention due to its widespread detection in aquatic environments as well as its potential risks to human health. UV/persulfate (PS) process is an emerging technology for degrading organic pollutants in water. Thus, the degradation of ATZ by a UV/PS process was investigated in this study. The results showed that the removal rate of ATZ was 98.4% with a PS dosage of 2 mg/L and an initial ATZ concentration of 0.1 mg/L. In addition, a relatively high degradation efficiency was obtained under pH = 7. However, the addition of humic acid (HA) reduced the removal rate of ATZ. Hydroxyl radicals (•OH) and sulfate radicals (•SO4-) respectively contributed to 21.7% and 29% of the ATZ degradation. The ATZ degradation pathway was proposed, and the main reactions of ATZ in this UV/PS process included dechlorination, demethylation, and deethylation. Moreover, the toxicity of ATZ and its degradation products was assessed using the Toxicity Estimation Software Tool (TEST), and the results showed that the toxicity of the ATZ solution was reduced after the UV/PS process. These results indicate that UV/PS shows good promise as a remediation technique for the treatment of persistent herbicides such as ATZ in contaminated water.

Immunotherapy for lung cancer: Focusing on chimeric antigen receptor (CAR)-T cell therapy.

Besides traditional treatment strategies, including surgery, radiotherapy, and chemotherapy for lung cancer as the leading cause of cancer incidence and death, immunotherapy has also emerged as a new treatment strategy. The goal of immunotherapy is to stimulate the immune system responses against cancer, using various approaches such as therapeutic vaccines, monoclonal antibodies, immune checkpoint inhibitors, and T-cell therapy. Chimeric antigen receptor (CAR)-T cells, one of the most popular cancer immunotherapy approaches in the last decade, are genetically engineered T-cells to redirect patients' immune responses to recognize and eliminate tumor-associated antigens (TAA)-expressing tumor cells. CAR-T cell therapy provides promising benefits in lung tumors. In this review, we summarize different immunotherapy approaches for lung cancer, the structure of CAR-T cells, currently undergoing CARs in clinical trials, and various TAAs are being investigated as potential targets in designing CAR-T cells for lung cancer.