Confined Element Distribution with Structure-driven Energy Coupling for Enhanced Prussian Blue Analogue Cathode.

The structural failure of Na2Mn[Fe(CN)6] could not be alleviated with traditional modification strategies through the adjustable composition property of Prussian blue analogues (PBAs), considering that the accumulation and release of stress derived from the MnN6 octahedrons are unilaterally restrained. Herein, a novel application of adjustable composition property, through constructing a coordination competition relationship between chelators and [Fe(CN)6]4- to directionally tune the enrichment of elements, is proposed to restrain structural degradation and induce unconventional energy coupling phenomenon. The non-uniform distribution of elements at the M1 site of PBAs (NFM-PB) is manipulated by the sequentially precipitated Ni, Fe, and Mn according to the Irving-William order. Electrochemically active Fe is operated to accompany Mn, and zero-strain Ni is modulated to enrich at the surface, synergistically mitigating with the enrichment and release of stress and then significantly improving the structural stability. Furthermore, unconventional energy coupling effect, a fusion of the electrochemical behavior between FeLS and MnHS, is triggered by the confined element distribution, leading to the enhanced electrochemical stability and anti-polarization ability. Consequently, the NFM-PB demonstrates superior rate performance and cycling stability. These findings further exploit potentialities of the adjustable composition property and provide new insights into the component design engineering for advanced PBAs.

Annealing Modulation Defect Chemistry toward High-Performance Sodium-Layered Cathodes.

Layered sodium transition-metal oxides generally encounter severe capacity decay and inferior rate performance during cycling, especially at a high state of charge. Herein, defect concentration is rationally modulated to explore the impact on electrochemical behavior in NaNi1/3Fe1/3Mn1/3O2 layered oxides. Bulk vacancies are increased through annealing in an oxygen-rich atmosphere, demonstrated by electron paramagnetic resonance measurement. It is found that the cathode with enriched oxygen vacancies exhibits significantly enhanced reversibility of redox reactions with a higher initial Coulombic efficiency of 90.0%. Furthermore, the reduced volume variations during the initial charge/discharge process are also confirmed by in situ X-ray diffraction. As a result, the oxygen-vacancy-rich cathode shows great cycling stability and superior rate performances. Also, full cells deliver a specific capacity of approximately 145.2 mAh g-1 at 0.5 C, with a high capacity retention of 78.3% after 100 cycles. This work presents a viable strategy for designing Na+ intercalated cathodes with a high-energy density.

Potential-Regulated Design for Direct Recycling of Degraded LiFePO4 Cathode.

The rapid proliferation of power sources equipped with lithium-ion batteries poses significant challenges in terms of post-scrap recycling and environmental impacts, necessitating urgent attention to the development of sustainable solutions. The cathode direct regeneration technologies present an optimal solution for the disposal of degraded cathodes, aiming to non-destructively re-lithiate and straightforwardly reuse degraded cathode materials with reasonable profits and excellent efficiency. Herein, a potential-regulated strategy is proposed for the direct recycling of degraded LiFePO4 cathodes, utilizing low-cost Na2SO3 as a reductant with lower redox potential in the alkaline systems. The aqueous re-lithiation approach, as a viable alternative, not only enables the re-lithiation of degraded cathode while ignoring variation in Li loss among different feedstocks but also utilizes the rapid sintering process to restore the cathode microstructure with desirable stoichiometry and crystallinity. The regenerated LiFePO4 exhibits enhanced electrochemical performance with a capacity of 144 mA h g-1 at 1 C and a high retention of 98% after 500 cycles at 5 C. Furthermore, this present work offers considerable prospects for the industrial implementation of directly recycled materials from lithium-ion batteries, resulting in improved economic benefits compared to conventional leaching methods.

Trace Fluorinated Carbon dots driven Li-Garnet Solid-State Batteries.

Garnet solid-state electrolyte Li6.5La3Zr1.5Ta0.5O12 (LLZTO) holds significant promise. However, the practical utilization has been seriously impeded by the poor contact of Li|garnet and electron leakage. Herein, one new type garnet-based solid-state batteries is prososed with high-performance  through the disparity in interfacial energy, induced by the reaction between trace fluorinated carbon dots (FCDs) and Li. The work of adhesion of Li|garnet is increased by the acquired Li-FCD composite, which facilitates an intimate Li|garnet interface with the promoted uniform Li+ deposition, revealed by density functional theory (DFT) calculations. It is futher validated that a concentrated C-Li2O-LiF component at the Li|garnet interface is spontaneously constructed, due to the the significant disparity in interfacial energy between C-Li2O-LiF|LLZTO and C-Li2O-LiF|Li. Furthermore, The electron transport and Li dendrites penetration are effectively hindered by the formed Li2O and LiF. The Li-FCD|LLZTO|Li-FCD symmetrical cells demonstrate stable cycling performance for over 3000 hours at 0.3 mA cm-2 and 800 hours at 0.5 mA cm-2. Furthermore, the LFP|garnet|Li-FCD full cell exhibit remarkable cycling performance (91.6% capacity retention after 500 cycles at 1 C). Our research has revealed a novel approach to establish a dendrite-free Li|garnet interface, laying the groundwork for future advancements in garnet-based solid-state batteries.

A nitrogen-doped carbon fiber coating embedded in the separator for stable zinc batteries.

A separator modification strategy was proposed by placing nitrogen-doped carbon fibers (NCF700) in the middle of the separator to prevent direct contact between the coating and the rigid zinc metal anode, resulting in coating cracks. The NCF700 coating can homogenize the electric field distribution and increase the transference number of zinc ions. Therefore, the battery assembled with the NCF700 coated separator exhibits superior cycling stability compared to the bare separator.

Biomass-Derived Hard Carbon for Sodium-Ion Batteries: Basic Research and Industrial Application.

Sodium-ion batteries (SIBs) have significant potential for applications in portable electric vehicles and intermittent renewable energy storage due to their relatively low cost. Currently, hard carbon (HC) materials are considered commercially viable anode materials for SIBs due to their advantages, including larger capacity, low cost, low operating voltage, and inimitable microstructure. Among these materials, renewable biomass-derived hard carbon anodes are commonly used in SIBs. However, the reports about biomass hard carbon from basic research to industrial applications are very rare. In this paper, we focus on the research progress of biomass-derived hard carbon materials from the following perspectives: (1) sodium storage mechanisms in hard carbon; (2) optimization strategies for hard carbon materials encompassing design, synthesis, heteroatom doping, material compounding, electrolyte modulation, and presodiation; (3) classification of different biomass-derived hard carbon materials based on precursor source, a comparison of their properties, and a discussion on the effects of different biomass sources on hard carbon material properties; (4) challenges and strategies for practical of biomass-derived hard carbon anode in SIBs; and (5) an overview of the current industrialization of biomass-derived hard carbon anodes. Finally, we present the challenges, strategies, and prospects for the future development of biomass-derived hard carbon materials.

Manipulating Local Chemistry and Coherent Structures for High-Rate and Long-Life Sodium-Ion Battery Cathodes.

Layered sodium transition-metal (TM) oxides generally suffer from severe capacity decay and poor rate performance during cycling, especially at a high state of charge (SoC). Herein, an insight into failure mechanisms within high-voltage layered cathodes is unveiled, while a two-in-one tactic of charge localization and coherent structures is devised to improve structural integrity and Na+ transport kinetics, elucidated by density functional theory calculations. Elevated Jahn-Teller [Mn3+O6] concentration on the particle surface during sodiation, coupled with intense interlayer repulsion and adverse oxygen instability, leads to irreversible damage to the near-surface structure, as demonstrated by X-ray absorption spectroscopy and in situ characterization techniques. It is further validated that the structural skeleton is substantially strengthened through the electronic structure modulation surrounding oxygen. Furthermore, optimized Na+ diffusion is effectively attainable via regulating intergrown structures, successfully achieved by the Zn2+ inducer. Greatly, good redox reversibility with an initial Coulombic efficiency of 92.6%, impressive rate capability (86.5 mAh g-1 with 70.4% retention at 10C), and enhanced cycling stability (71.6% retention after 300 cycles at 5C) are exhibited in the P2/O3 biphasic cathode. It is believed that a profound comprehension of layered oxides will herald fresh perspectives to develop high-voltage cathode materials for sodium-ion batteries.

Zinc-Ion Anchor Induced Highly Reversible Zn Anodes for High Performance Zn-Ion Batteries.

Unstable Zn interface with serious detrimental parasitic side-reactions and uncontrollable Zn dendrites severely plagues the practical application of aqueous zinc-ion batteries. The interface stability was closely related to the electrolyte configuration and Zn2+ depositional behavior. In this work, a unique Zn-ion anchoring strategy is originally proposed to manipulate the coordination structure of solvated Zn-ions and guide the Zn-ion depositional behavior. Specifically, the amphoteric charged ion additives (denoted as DM), which act as zinc-ion anchors, can tightly absorb on the Zn surface to guide the uniform zinc-ion distribution by using its positively charged -NR4 + groups. While the negatively charged -SO3 - groups of DM on the other hand, reduces the active water molecules within solvation sheaths of Zn-ions. Benefiting from the special synergistic effect, Zn metal exhibits highly ordered and compact (002) Zn deposition and negligible side-reactions. As a result, the advanced Zn||Zn symmetric cell delivers extraordinarily 7000 hours long lifespan (0.25 mA cm-2, 0.25 mAh cm-2). Additionally, based on this strategy, the NH4V4O10||Zn pouch-cell with low negative/positive capacity ratio (N/P ratio=2.98) maintains 80.4 % capacity retention for 180 cycles. A more practical 4 cm*4 cm sized pouch-cell could be steadily cycled in a high output capacity of 37.0 mAh over 50 cycles.

Mitochondria-targeted BODIPY dyes for small molecule recognition, bio-imaging and photodynamic therapy.

Mitochondria are essential for a diverse array of biological functions. There is increasing research focus on developing efficient tools for mitochondria-targeted detection and treatment. BODIPY dyes, known for their structural versatility and excellent spectroscopic properties, are being actively explored in this context. Numerous studies have focused on developing innovative BODIPYs that utilize optical signals for imaging mitochondria. This review presents a comprehensive overview of the progress made in this field, aiming to investigate mitochondria-related biological events. It covers key factors such as design strategies, spectroscopic properties, and cytotoxicity, as well as mechanism to facilitate their future application in organelle imaging and targeted therapy. This work is anticipated to provide valuable insights for guiding future development and facilitating further investigation into mitochondria-related biological sensing and phototherapy.

Aluminum ion chemistry of Na4Fe3(PO4)2(P2O7) for all-climate full Na-ion battery.

Na4Fe3(PO4)2(P2O7) (NFPP) is currently drawing increased attention as a sodium-ion batteries (SIBs) cathode due to the cost-effective and NASICON-type structure features. Owing to the sluggish electron and Na+ conductivities, however, its real implementation is impeded by the grievous capacity decay and inferior rate capability. Herein, multivalent cation substituted microporous Na3.9Fe2.9Al0.1(PO4)2(P2O7) (NFAPP) with wide operation-temperature is elaborately designed through regulating structure/interface coupled electron/ion transport. Greatly, the derived Na vacancy and charge rearrangement induced by trivalent Al3+ substitution lower the ions diffusion barriers, thereby endowing faster electron transport and Na+ mobility. More importantly, the existing Al-O-P bonds strengthen the local environment and alleviate the volume vibration during (de)sodiation, enabling highly reversible valence variation and structural evolution. As a result, remarkable cyclability (over 10,000 loops), ultrafast rate capability (200 C), and exceptional all-climate stability (-40-60 °C) in half/full cells are demonstrated. Given this, the rational work might provide an actionable strategy to promote the electrochemical property of NFPP, thus unveiling the great application prospect of sodium iron mixed phosphate materials.

Unraveling the "Gap-Filling" Mechanism of Multiple Charge Carriers in Aqueous Zn-MoS2 Batteries.

The utilization rate of active sites in cathode materials for Zn-based batteries is a key factor determining the reversible capacities. However, a long-neglected issue of the strong electrostatic repulsions among divalent Zn2+ in hosts inevitably causes the squander of some active sites (i.e., gap sites). Herein, we address this conundrum by unraveling the "gap-filling" mechanism of multiple charge carriers in aqueous Zn-MoS2 batteries. The tailored MoS2 /(reduced graphene quantum dots) hybrid features an ultra-large interlayer spacing (2.34 nm), superior electrical conductivity/hydrophilicity, and robust layered structure, demonstrating highly reversible NH4 + /Zn2+ /H+ co-insertion/extraction chemistry in the 1 M ZnSO4 +0.5 M (NH4 )2 SO4 aqueous electrolyte. The NH4 + and H+ ions can act as gap fillers to fully utilize the active sites and screen electrostatic interactions to accelerate the Zn2+ diffusion. Thus, unprecedentedly high rate capability (439.5 and 104.3 mAh g-1 at 0.1 and 30 A g-1 , respectively) and ultra-long cycling life (8000 cycles) are achieved.

Constructing an Anion-Braking Separator to Regulate Local Li+ Solvation Structure for Stabilizing Lithium Metal Batteries.

Lithium metal batteries (LMBs) offer significant advantages in energy density and output voltage, but they are severely limited by uncontrollable Li dendrite formation resulting from uneven Li+ behaviors and high reactivity with potential co-solvent plating. Herein, to uniformly enhance the Li behaviors in desolvation and diffusion, the local Li+ solvation shell structure is optimized by constructing an anion-braking separator, hence dynamically reducing the self-amplifying behavior of dendrites. As a prototypal, two-dimensional lithiated-montmorillonite (LiMMT) is blade-coated on the commercial separator, where abundant -OH groups as Lewis acidic sites and electron acceptors could selectively adsorb corresponding FSI- anions, regulating the solvation shell structure and restricting their migration. Meanwhile, the weakened anion mobility delays the time of breaking electrical neutrality, and the Li nucleation density is quantified through the respective experimental, theoretical and spectroscopical results, providing a comprehensive understanding of modifying anion and cation behaviors on dendritic growth suppression. As anticipated, a long Li plating/stripping lifespan up to 1800 h and a significantly increased average Coulombic efficiency of 98.8% are achieved under 3.0 mAh cm-2. The fabricated high-loading Li-LFP or Li-NCM523 full-cells display the cycle durability with enhanced capacity retention of nearly 100%, providing the instructive guide towards realizing dendrite-free LMBs.

Structural Distortion in the Wadsley-Roth Niobium Molybdenum Oxide Phase Triggering Extraordinarily Stable Battery Performance.

Wadsley-Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium-molybdenum oxide shear phase (Nb, Mo)13 O33 with superior electrochemical Li-ion storage performance, including an ultralong cycling lifespan of at least 15000 cycles. During electrochemical cycling, a reversible single-phase solid-solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X-ray diffraction, with the valence and short-range structural changes of the electrode probed by in situ Nb and Mo K-edge X-ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in-depth understanding of how this stabilizes the oxide structure during cycling with implications for future long-life battery material design.

High Voltage Ga-Doped P2-Type Na2/3 Ni0.2 Mn0.8 O2 Cathode for Sodium-Ion Batteries.

Ni/Mn-based oxide cathode materials have drawn great attention due to their high discharge voltage and large capacity, but structural instability at high potential causes rapid capacity decay. How to moderate the capacity loss while maintaining the advantages of high discharge voltage remains challenging. Herein, the replacement of Mn ions by Ga ions is proposed in the P2-Na2/3 Ni0.2 Mn0.8 O2 cathode for improving their cycling performances without sacrificing the high discharge voltage. With the introduction of Ga ions, the relative movement between the transition metal ions is restricted and more Na ions are retained in the lattice at high voltage, leading to an enhanced redox activity of Ni ions, validated by ex situ synchrotron X-ray absorption spectrum and X-ray photoelectron spectroscopy. Additionally, the P2-O2 phase transition is replaced by a P2-OP4 phase transition with a smaller volume change, reducing the lattice strain in the c-axis direction, as detected by operando/ex situ X-ray diffraction. Consequently, the Na2/3 Ni0.21 Mn0.74 Ga0.05 O2 electrode exhibits a high discharge voltage close to that of the undoped materials, while increasing voltage retention from 79% to 93% after 50 cycles. This work offers a new avenue for designing high-energy density Ni/Mn-based oxide cathodes for sodium-ion batteries.

Boosting the interfacial dynamics and thermodynamics in polyanion cathode by carbon dots for ultrafast-charging sodium ion batteries.

Ultrafast-charging is the focus of next-generation rechargeable batteries for widespread economic success by reducing the time cost. However, the poor ion diffusion rate, intrinsic electronic conductivity and structural stability of cathode materials seriously hinder the development of ultrafast-charging technology. To overcome these challenges, an interfacial dynamics and thermodynamics synergistic strategy is proposed to synchronously enhance the fast-charging capability and structural stability of polyanion cathode materials. As a case study, a Na3V2(PO4)3 composite (NVP/NSC) is successfully obtained by introducing an interface layer derived from N/S co-doped carbon dots. Density functional theory calculations validate that the interfacial bonding effect of V-N/S-C significantly reduces the Na+ transport energy barrier. D-band center theory analysis confirms the downward shift of the V d-band center enhances the strength of the V-O bond and considerably inhibits irreversible phase transformation. Benefitting from this interfacial synergistic strategy, NVP/NSC achieves a high capability and excellent cycling stability with a surprisingly low carbon content (2.23%) at an extremely high rate of 100C for 10 000 cycles (87.2 mA h g-1, 0.0028% capacity decay per cycle). Furthermore, a superior performance at 5C (115.3 mA h g-1, 92.1% capacity retention after 800 cycles) is exhibited by the NVP/NSC‖HC full cell. These findings provide timely new insights for the systematic design of ultrafast-charging cathode materials.

Carbon dots from alcohol molecules: principles and the reaction mechanism.

Carbon dots (CDs) have attracted significant attention in the energy, environment, and biology fields due to their exceptional physicochemical properties. However, owing to the multifarious precursors and complex reaction mechanisms, the production of carbon dots from organic molecules is still a mysterious process. Inspired by the color change of sodium hydroxide ethanol solution after standing for some time, in this work, we thoroughly investigated the reaction mechanism from alcohol molecules to carbon dots through a lot of experiments and theoretical calculations, and it was found that the rate-controlling reaction is the formation of aldehydes, and it is also confirmed that there is a self-catalysis reaction, which can accelerate the conversion from alcohol to aldehyde, further facilitating the final formation of CDs. After the rate-controlling reaction of alcohol to aldehyde, under strongly alkaline conditions, an aldol reaction occurs to form unsaturated aldehydes, followed by further condensation and polymerization reactions to form long carbon chains, which are cross-linked and dehydrated to form carbon dots with a carbon core and surface functional groups. Additionally, it is found that the reaction can be largely accelerated with the assistance of electricity, which indicates the great prospect of industrial production. Furthermore, the obtained CDs with rich functional groups can be utilized as electrolyte additives to optimize the deposition behavior of Na metal, manifesting great potential towards safe and stable Na metal batteries.

Electric-Eel-Type Bi-Ionic Gradient Battery.

Electric eels generate electricity with a discharge voltage of up to 860 V under ionic gradients, providing a fascinating example to inspire viable and flexible power sources. However, hitherto reported eel-related devices are strictly restricted by complicated fabrication and environmental energy input. Herein, an electric-eel-type bi-ionic gradient battery (BGB) is performed by cationic and anionic polyelectrolyte hydrogels featuring simplified units and self-energy supply. Benefiting from ionic bonds with opposite charges in the polymer chain, bianion gradients as well as ion selective migration pathways are synchronously constructed and integrated units are enabled. As a result, an open-circuit voltage of 0.54 V and a short-circuit current density of 13 µA cm-2 are generated by a BGB unit. Moreover, a voltage output up to 60 V is derived from integrated BGB devices, demonstrating the potential to drive wearable and implantable electronics. In this case, these artificial electric systems could overcome the great challenges of environmentally friendly, biocompatible, low-cost, and soft power sources, providing in-depth insights into the development of clean and sustainable power generation technologies.

Molecular Engineering of Highly Fluorinated Carbon Dots: Tailoring Li+ Dynamics and Interfacial Fluorination for Stable Solid Lithium Batteries.

Fluorinated carbon dots (FCDs) have garnered interest owing to their distinct physicochemical properties. Nevertheless, intricate synthesis procedures and quite low fluorine doping levels limit its development and application. Herein, we propose a facile approach based on the Claisen-Schmidt reaction to realize gram-scale synthesis of highly fluorinated carbon dots (up to 20.79 at. %) at room temperature and atmospheric pressure, and a comprehensive exploration of the specific reaction mechanism is conducted. Furthermore, in consideration of the high fluorine content, good dispersibility, and compatibility with polymer electrolyte, the synthesized FCDs are utilized as an additive for PEO-based solid electrolytes of a Li battery to improve its ionic conductivity, interface stability, and mechanical properties. The introduction of FCDs can not only reduce the crystallinity of PEO and enhance the interaction of polymer chains, but also facilitate the establishment of uninterrupted pathways and in situ fluorination at the interface, which is substantiated by both theoretical calculations and experimental findings. As a result, the lithium symmetrical battery can operate stably for 1000 h at a current density of 0.4 mA cm-2. Simultaneously, the LiFePO4/Li battery utilizing the composite electrolyte exhibits a capacity of 130.3 mAh g-1 over 300 cycles while maintaining a capacity retention rate of 95.10%. This study develops a strategy for synthesizing highly fluorinated carbon dots, which demonstrate a useful influence on PEO electrolytes, thus boosting the advancement of FCDs and solid-state batteries.

Difluoroethylene Carbonate as an Electrolyte Additive for Engineering the Electrolyte-Electrode Interphase of Lithium Metal Batteries.

Difluoroethylene carbonate (DFEC) featuring abundant fluorine atoms has been proposed as a multifunctional electrolyte additive to boost the stability of the electrolyte-electrode interphase of lithium metal batteries. Thus, introducing the DFEC additive enables a high capacity retention rate of the Li||NCM811 full cell (up to 75% after 200 cycles) at 4.5 V high voltage.

In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes.

The practical application of Li metal anodes (LMAs) is limited by uncontrolled dendrite growth and side reactions. Herein, we propose a new friction-induced strategy to produce high-performance thin Li anode (Li@CFO). By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling, a robust organic/inorganic hybrid interlayer (lithiophilic LiF/LiC6 framework hybridized -CF2-O-CF2- chains) was formed atop Li metal. The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface. The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h (1.0 mA cm-2 and 1.0 mAh cm-2) and 1,350 cycles even at a harsh condition (18.0 mA cm-2 and 3.0 mAh cm-2). When paired with high-loading LiFePO4 cathodes, the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%. This work provides a new friction-induced strategy for producing high-performance thin LMAs.