Selectively gas-filled anti-resonant hollow-core fibers for broadband high-purity LP11 mode guidance.

An anti-resonant hollow-core fiber capable of propagating the LP11 mode with high purity and over a wide wavelength range is proposed and demonstrated. The suppression of the fundamental mode relies on the resonant coupling with specific gas selectively filled into the cladding tubes. After a length of 2.7 m, the fabricated fiber shows a mode extinction ratio of over 40 dB at 1550 nm and above 30 dB in a wavelength range of 150 nm. The loss of the LP11 mode is measured to be 2.46 dB/m at 1550 nm. We discuss the potential application of such fibers in high-fidelity high-dimensional quantum state transmission.

Birefringent, low loss, and broadband semi-tube anti-resonant hollow-core fiber.

We report on the design, fabrication, and characterization of a low-loss birefringent semi-tube anti-resonant hollow-core fiber (AR-HCF). By optimizing the structure design and the stack-and-draw fabrication technique, a transmission loss of 4.8 dB/km at 1522 nm, a <10 dB/km bandwidth of 154 nm, and a phase birefringence of 1.8 × 10-5 are demonstrated. This achieved loss is more than one order of magnitude lower than the previously reported birefringent AR-HCF and the bandwidth is one order of magnitude broader than the reported birefringent photonic bandgap hollow-core fiber (PBG-HCF) with the same loss level. The polarization extinction ratio (PER) reaches the ∼20 dB level in a 90 m-long fiber under >25 cm bending radius. Combined with the single mode and low dispersion features, the developed semi-tube AR-HCF may find a variety of applications in frequency metrology, interferometric fiber gyroscopes, and long-baseline stellar interferometry.

Air flowing induced thermo-optic effect for thermal sensitivity reduction in anti-resonant hollow core fibers.

The signal propagation delay through an optical fiber changes with environmental temperature, imposing a fundamental limit on performances in many fiber-optic applications. It has been shown that the thermal coefficient of delay (TCD) in hollow core fibers (HCFs) can be 20 times lower than in standard single-mode fibers (SSMFs). To further reduce TCD over a broad wavelength range at room temperature, so that to enrich fiber-optic applications in time- synchronization scenarios, the thermal expansion effect of silica glass must be compensated for. Exploiting the thermo-optic effect of air inside an anti-resonant hollow core fiber (ARF) can be a feasible solution. Nevertheless, an accurate description of the air flow in the course of temperature variation is highly needed to predict the influence of this effect. This work develops an analytical model for quantitatively calculating this temperature-induced air-flowing effect. Across a range of parameters of core diameter, fiber length, and temperature change rate, the experimentally measured propagation delay changes agree well with our model. The resultant low thermal sensitivity is also validated in non-steady conditions and in a practically usable SSMF-ARF-SSMF chain. Our model indicates that a >40-fold TCD reduction relative to SSMFs can be realized in a 60-m-long, 50-µm-diameter ARF, and further TCD reduction should be possible by properly engineering the gas type and the ambient pressure.

High extinction ratio and low backreflection polarization maintaining hollow-core to solid-core fiber interconnection.

We develop a hybrid cold/heat two-step splicing approach for low loss, low backreflection, and high polarization extinction ratio (PER) hollow-core to solid-core fiber interconnection. The employed hollow-core fiber (HCF) is our recently developed high-birefringence polarization-maintaining hollow-core fiber (PM-HCF) with a PER value of ∼30 dB, and the solid-core fiber (SCF) is a commercial Panda polarization-maintaining fiber (Panda fiber). Simultaneous low backreflection (<-35 dB), low insertion loss (IL) (∼0.7 dB), and high PER (∼27 dB) are achieved, representing the first high-performance PM-HCF/SCF interconnections, to the best of our knowledge. This greatly facilitates the applications of PM-HCF in widespread fields such as precise metrologies, gyroscopes, and ultrafast/high-power laser deliveries.

Connector-style hollow-core fiber interconnections.

To go beyond the fundamental limits imposed by latency, nonlinearity, and laser damage threshold in silica glass fibers, the hollow-core fiber (HCF) technique has been intensively investigated for decades. Recent breakthroughs in ultralow-loss HCF clearly imply that long-haul applications of HCF in communications and lasers are going to appear. Nevertheless, up to now, the HCF technique as a whole is still hampered by the limited length of a single span and the lack of HCF-based functional devices. To resolve these two issues, it is of importance to develop ultralow-loss and plug-and-play HCF interconnections. In this work, we report on HCF interconnections with the lowest-ever insertion losses (0.10 dB for HCF to standard single-mode fiber (SMF) and 0.13 dB for HCF to itself in the 1.5 µm waveband) and in a pluggable means. Two fiber mode-field adapters, one based on a graded-index multi-mode fiber (GIF) and the other utilizing a thermally expanded core (TEC) SMF, have been tested and compared. An extra insertion loss arising from imperfect refractive index distribution in a commercial GIF is observed. Our HCF interconnections also realize a back-reflection of <-35 dB over a 100 nm bandwidth as well as other critical metrics in favor of practical applications. Our technique is viable for any type of HCF.