ABSTRACT
Transmission lines are affected by Aeolian vibration, which causes strands to break and eventually causes an entire line to break. In this paper, a method for monitoring strand breaking based on modal identification is proposed. First, the natural frequency variation of a conductor caused by strand breakage is analyzed, and a modal experiment of the LGJ-95/15 conductor is conducted. The measurement results show that the natural frequencies of the conductor decrease with an increasing number of broken strands. Next, a monitoring system incorporating a fiber Bragg grating (FBG)-based accelerometer is designed in detail. The FBG sensor is mounted on the conductor to measure the vibration signal. A wind speed sensor is used to measure the wind speed signal and is installed on the tower. An analyzer is also installed on the tower to calculate the natural frequencies, and the data are sent to the monitoring center via 3G. Finally, a monitoring system is tested on a 110 kV experimental transmission line, and the short-time Fourier transform (STFT) method and stochastic subspace identification (SSI) method are used to identify the natural frequencies of the conductor vibration. The experimental results show that SSI analysis provides a higher precision than does STFT and can extract the natural frequency under various wind speeds as an effective basis for discriminating between broken strands.
ABSTRACT
The codebook background subtraction approach is widely used in computer vision applications. One of its distinguished features is the cylinder color model used to cope with illumination changes. The performances of this approach depends strongly on the color model. However, we have found this color model is valid only if the spectrum components of the light source change in the same proportion. In fact, this is not true in many practical cases. In these cases, the performances of the approach would be degraded significantly. To tackle this problem, we propose an arbitrary cylinder color model with a highly efficient updating strategy. This model uses cylinders whose axes need not going through the origin, so that the cylinder color model is extended to much more general cases. Experimental results show that, with no loss of real-time performance, the proposed model reduces the wrong classification rate of the cylinder color model by more than fifty percent.
ABSTRACT
Flexure hinges have been used to produce frictionless and backlashless transmission in a variety of precision instruments. Many kinds of flexure profile were proposed during the past decade. The present work brings elliptical arc, parabolic, and hyperbolic profiles together by proposing a generalized conic flexure hinge model. By utilizing the generalized equation for conic curves in polar coordinates, all the elements in the compliance and precision matrices for conic flexure hinges are deduced. These equations were verified by finite element analysis and experimentation. The analytical results are within 11% error compared to the finite element results and within 6% error compared to the experimental results.
