Enhanced permeate flux by air micro-nano bubbles via reducing apparent viscosity during ultrafiltration process.

Micro-nano bubbles (MNBs) play important roles in the reduction of membrane fouling during membrane separation; however, such improvements are always attributed to the reduced concentration polarization on the surface of membranes and little attention has been paid on the variations of physicochemical properties of the feed caused by MNBs. In this study, the separation efficiencies of the feed containing humic acid (HA), bovine serum albumin (BSA), sodium alginate (SA) or dyes can be improved by MNBs during ultrafiltration, and the normalized fluxes can be maximally increased to 139% and 127% in the dead-end and cross-flow modes, respectively in the treatment of HA solution. We further reveal that the decreased apparent viscosity of the feed in the presence of MNBs is the key factor that enhances the normalized flux during ultrafiltration. This study gives new insight on the importance of MNBs in membrane separation and provides valuable clues for other chemical processes.

Mediation of water-soluble oligoaniline by phenol in the aniline-persulfate system under alkaline conditions.

Although synthesis of oligoaniline (OANI) by persulfate and aniline has been investigated in the recent years, the impact of phenol on the synthesized soluble OANI is still not clear. In this study, our results indicate that phenol and pH mediate the production of the blue water-soluble OANI (OANIblue) in the reaction between sodium persulfate (SPS) and aniline under alkaline conditions, and the yields of OANIblue increase with increasing concentrations of phenol and pH values. Quenching experiments rule out the contributions of SO4˙- and ˙OH to aniline oxidation and imply that the non-radical activation of SPS is an important pathway in the formation of OANIblue. MALDI-TOF-MS analysis indicates that phenol apparently inhibits the polymerization degree of aniline in that the molecular weights of OANIblue gradually decrease from 1586.4 to 684.6 when phenol is increased from 0 to 2.0 mM. FTIR and Raman analyses confirm the structure of aniline oligomers in OANIblue and indicate that phenol inhibits the phenazine-like structure in OANIblue and facilitates the transformation of benzenoid rings to quinoid rings in the oxidation products. However, simultaneous activation of SPS by phenol and aniline is likely to occur in the reaction system with the formation of PhNH˙, as indicated by DFT calculations. The high scavenging reactivity of phenol towards both PhNH2˙+ and PhNH˙ implies that PhNH2˙+ and PhNH˙ are not the intermediates in the formation of OANIblue. DFT calculations also reveal that apart from the one-electron transfer pathway between aniline and SPS, the two-electron transfer pathway is also likely to occur in the presence of phenol, resulting in the formation of PhNH+/PhN˙˙ without producing PhNH2˙+ and PhNH˙. The produced PhNH+/PhN˙˙ intermediates then couple with aniline, PhNH+, aminophenyl sulfate and its hydrolysate to form dimers, trimers, oligomers, and eventually OANIblue. This study not only describes a novel method to prepare water-soluble OANI, but also gives new insight on the importance of phenol in the production of OANIblue.

The fast redox cycle of Cu(II)-Cu(I)-Cu(II) in the reduction of Cr(VI) by the Cu(II)-thiosulfate system.

Thiosulfate (S2O32-) is an important ligand to complex metal cations, however, the reactivity of metal-thiosulfate complexes has barely been mentioned. In this study, the reactivity of the Cu(II)-S2O32- system in the reduction of Cr(VI) was investigated. Kinetic results show that the reduction rates of Cr(VI) decrease with increasing pH values from 3.0 to 5.0, and 94.3% and 97.5% of 10 mg L-1 Cr(VI) was rapidly reduced within 1 min at pH 3.0 and within 30 min at pH 5.0, respectively at the molar ratio of Cu(II):S2O32- of 0.05. We rule out the contributions of S species of tetrathionate (S4O62-) and sulfite (SO32-) to Cr(VI) reduction and point out that the produced Cu(I) in the Cu(II)-S2O32- system is the key reductant that mediates the reduction of Cr(VI). We suggest that complexation between Cu(II) and S2O32- with the formation of CuII(S2O3)22- is the pre-requisite for the formation of CuI(S2O3)n1-2n, which plays an important role in Cr(VI) reduction, accompanied by the re-oxidation of Cu(I) to Cu(II) by Cr(VI), achieving the rapid redox cycling of Cu(II)-Cu(I)-Cu(II). Such a redox cycle also mediates the denitrification process of NO2- to NH3/NH4+ under weakly acidic conditions. This study enriches our understanding on the reducing reactivity of the Cu(II)-S2O32- system and the importance of the Cu(II)-Cu(I)-Cu(II) redox cycle towards environmental oxidizing contaminants.

Selective oxidation of aniline contaminants via a hydrogen-abstraction pathway by Bi2·15WO6 under visible light and alkaline conditions.

Conversion of aniline wastes to value-added products is always a promising method to treat aniline wastewater. In this study, a selective oxidation of aniline contaminants by Bi2·15WO6 was carried out under visible light and alkaline conditions. Kinetic results show that the oxidation rates of aniline increase with increasing pH values under visible light. UV-vis absorption spectra and GC-MS analysis confirm that azobenzene is the primary oxidation product with aminophenol and N,N'-diphenylhydrazine as the secondary products. The analyses from Mott-Schottky, electrochemical impedance spectroscopy (EIS), transient photocurrent and photoluminescence (PL) further indicate that OH- promotes the separation and transfer of photogenerated electron-hole pairs on the surface of Bi2·15WO6, thus facilitating oxidation of aniline. Quenching experiments and electron spin resonance (ESR) analysis confirm that h+ is the predominant specie in the Bi2·15WO6 system and aniline radical cation (PhNH2•+) is an important intermediate. The Hammett and ΔBDEN-H plots further reveal that e- abstraction from aniline with the formation of PhNH2•+, followed by H+ abstraction from PhNH2•+ with the formation of anilino radicals (PhNH•), is the prerequisite for the formation of N,N'-diphenylhydrazine, which is then oxidized to azobenzene via the hydrogen-abstraction pathway. This work provides a cost-effective method to selectively oxidize aniline to azobenzene.

Formation of hydroperoxo (-OOH) species on the surface of self-doped Bi2.15WO6: reactivity towards As(iii) oxidation.

Bi2+xWO6 is a cost-effective and environmentally friendly photocatalyst that shows high reactivity in the oxidation of various contaminants under visible light. However, under alkaline conditions, the reactive oxidative species in the Bi2+xWO6 system are still not clear yet. In this study, it is observed that the oxidation rates of As(iii) increase with increasing pH values in the Bi2.15WO6 system. Photoluminescence and the Mott-Schottky analyses confirm that OH- promotes the separation and transfer of photogenerated electron-hole pairs over Bi2.15WO6, thus facilitating the oxidation of As(iii). Electron spin resonance spectra analysis and quenching experiments rule out contributions of •OH, O2˙-, 1O2 and superoxo species to As(iii) oxidation and indicate that surface -OOH and/or H2O2 are indeed the predominant species under alkaline conditions. The improved production of H2O2 by H-donors such as glucose and phenol, as well as the UV-vis diffuse reflectance and Raman analyses, further confirms the formation of surface -OOH on Bi2.15WO6 under alkaline conditions. In the dark, the significant higher oxidation rate of As(iii) by H2O2-Bi2.15WO6 than that by H2O2 alone reveals that surface -OOH, instead of H2O2, plays an important role in As(iii) oxidation. This study enriches our understanding of the diversity of reactive oxygen species (ROS) in the Bi2.15WO6 system and gives new insight into the mechanism involved in the oxidation of As(iii) under alkaline conditions.

Formation and Oxidation Reactivity of MnO2+(HCO3-)n in the MnII(HCO3-)-H2O2 System.

The MnII(HCO3-)-H2O2 (MnII-BAP) system shows high reactivity toward oxidation of electron-rich organic substrates; however, the predominant oxidizing species and its formation pathways involved in the MnII-BAP system are still under debate. In this study, we used the MnII-BAP system to oxidize As(III) in that As(III), Mn2+, and HCO3- are common components in As(III)-contaminated groundwater. Kinetic results show that MnII(HCO3-)n [including MnII(HCO3)+ and MnII(HCO3)2] is a key factor in the MnII-BAP system to oxidize As(III). Quenching experiments rule out contributions of OH• and 1O2 to As(III) oxidation and reveal that O2•- and the oxidizing species generated from O2•- play predominant roles in the oxidation of As(III). We further reveal that the MnO2+(HCO3-)n intermediate generated in the reaction between MnII(HCO3-)n and O2•-, instead of O2•-, is the predominant oxidizing species. Although CO3•- also contributes to As(III) oxidation, the high reaction rate constant between CO3•- and O2•- indicates that CO3•- is not the predominant oxidizing species in the As(III)-MnII-BAP system. In addition, the presence of Mn(III) further indicates the important Mn(II)-Mn(III) cycling in the MnII-BAP system. We therefore suggest two important roles of MnII(HCO3-)n in the MnII-BAP system: (i) MnII(HCO3-)n reacts with H2O2 to form the MnIII(HCO3)3 intermediate, followed by a subsequent reaction between MnIII(HCO3)3 and H2O2 to produce O2•-; (ii) MnII(HCO3-)n can also stabilize O2•- with the formation of MnO2+(HCO3-)n. MnO2+(HCO3-)n is an electrophilic reagent and plays the predominant role in the oxidation of As(III) to As(V).

ZIF-8@polyoxometalate derived Si-doped ZnWO4@ZnO nanocapsules with open-shaped structures for efficient visible light photocatalysis.

In this work, we report silicon doped ZnWO4@ZnO nanocapsules with open-shaped structures obtained by a facile encapsulation-calcination strategy derived from ZIF-8 and polyoxometalates. Owing to the unique structure and elemental composition, the as-prepared samples respond well to visible light irradiation for degradating Rhodamine B. The possible photocatalytic reaction mechanisms are presented based on density functional theory (DFT) calculations.

Correction: ZIF-8@polyoxometalate derived Si-doped ZnWO4@ZnO nanocapsules with open-shaped structures for efficient visible light photocatalysis.

Correction for 'ZIF-8@polyoxometalate derived Si-doped ZnWO4@ZnO nanocapsules with open-shaped structures for efficient visible light photocatalysis' by Jingyu Ran et al., Chem. Commun., 2018, DOI: .

Photoreductive dissolution of schwertmannite induced by oxalate and the mobilization of adsorbed As(V).

Schwertmannite (Sch), a poorly crystalline iron mineral, shows high sorption capacity to As(V). In this study, the effects of UV irradiation and oxalate on the dissolution of pure Sch, Sch with adsorbed As(V) [Sch*-As(V)] and subsequent mobilization of As(V) were investigated at pH 3.0. Under UV irradiation, the dissolved Fe(II) took the majority of the total dissolved Fe during the dissolution of Sch and Sch*-As(V). In the presence of oxalate, Fe(III)-oxalate complexes formed on Sch [or Sch*-As(V)] could be converted into Fe(II)-oxalate by photo-generated electrons under UV illumination, and more total dissolved Fe produced compared to that without oxalate. In the dark, total dissolved Fe reached the maximum value (42.64 mg L-1 for Sch) rapidly and existed as Fe(III) predominately. In addition, UV irradiation has almost no effect on the mobilization of As(V) in Sch*-As(V) in the absence of oxalate. However, in the presence of oxalate, UV irradiation resulted in the mobilization of As(V) declined by 14-36.5 times compared to that in the dark. This study enhanced our understanding on the mobilization of As(V), and UV irradiation could contribute to the immobilization of As(V) on Sch in the aquatic environments containing oxalate.

New Insight into Polydopamine@ZIF-8 Nanohybrids: A Zinc-Releasing Container for Potential Anticancer Activity.

Despite the initial evidence on the role of zinc and zinc transporters in cancer prevention, little attention has been paid to the zinc-derived compounds. In the present work, we reported a strategy to prepare a kind of zinc-releasing container with enhanced biocompatibility and release dynamics using ZIF-8 nanocrystals as the sacrificial templates. Transmission electron microscopy (TEM) analysis demonstrated that the ZIF-8 nanocrystals were gradually etched out in the aqueous media within 48 h, resulting in hollow nanocapsules. Notably, we found the self-polymerization of dopamine can form nanoshells around the ZIF-8 nanocrystals, which served as a type of functional membranes during the release of zinc. More interestingly, PDA@ZIF-8⁻based nanohybrids expressed stronger inhibition to the cancer cell growth, which implied that the nanohybrids could be a drug carrier for chemotherapy. This study broadens the biomedical application of ZIF-8 and also provides a versatile strategy toward the development of multifunctional delivery system.

Ellipsoidal Colloids with a Controlled Surface Roughness via Bioinspired Surface Engineering: Building Blocks for Liquid Marbles and Superhydrophobic Surfaces.

Understanding the important role of the surface roughness of nano/colloidal particles and harnessing them for practical applications need novel strategies to control the particles' surface topology. Although there are many examples of spherical particles with a specific surface roughness, nonspherical ones with similar surface features are rare. The current work reports a one-step, straightforward, and bioinspired surface engineering strategy to prepare ellipsoidal particles with a controlled surface roughness. By manipulating the unique chemistry inherent to the oxidation-induced self-polymerization of dopamine into polydopamine (PDA), PDA coating of polymeric ellipsoids leads to a library of hybrid ellipsoidal particles (PS@PDA) with a surface that decorates with nanoscale PDA protrusions of various densities and sizes. Together with the advantages originated from the anisotropy of ellipsoids and rich chemistry of PDA, such a surface feature endows these particles with some unique properties. Evaporative drying of fluorinated PS@PDA particles produces a homogeneous coating with superhydrophobicity that arises from the two-scale hierarchal structure of microscale interparticle packing and nanoscale roughness of the constituent ellipsoids. Instead of water repelling that occurs for most of the lotus leaf-like superhydrophobic surfaces, such coating exhibits strong water adhesion that is observed with certain species of rose pedals. In addition, the as-prepared hybrid ellipsoids are very efficient in preparing liquid marble-isolated droplets covered with solid particles. Such liquid marbles can be placed onto many surfaces and might be useful for the controllable transport and manipulation of small volumes of liquids.

As(III) removal and speciation of Fe (Oxyhydr)oxides during simultaneous oxidation of As(III) and Fe(II).

Abiotic oxidation of Fe(II) is an important pathway in the formation of Fe (oxyhydr)oxides. However, how can As(III) affect the oxidation rate of Fe(II) and the speciation of Fe (oxyhydr)oxides, and what's the extent of the newly formed Fe (oxyhydr)oxides on the removal of aqueous arsenic are still poorly understood. Oxidation of Fe(II) under neutral pH conditions was therefore investigated under different molar ratios of As:Fe. Our results suggest that co-existence of aqueous As(III) significantly slows down the oxidation rate of Fe(II). Speciation of Fe (oxyhydr)oxides is dependent on pH and As:Fe ratios. At pH 6.0, formation of lepidocrocite and goethite is apparently inhibited at low As:Fe ratios, and ferric arsenate is favored at high As:Fe ratios. At pH 7.0, lepidocrocite gradually degenerates with the increasing As:Fe ratios. At pH 8.0, arsenite significantly inhibits the development of magnetite and favors a formation of lepidocrocite. XPS analysis further reveals that more than half of As(III) is oxidized to As(V) at pH 6.0 and 7.0, whereas at pH 8.0, the rapid oxidation of Fe(II) as well as the rapid formation of Fe (oxyhydr)oxides facilitate a rapid removal of dissolved As(III) before its further oxidation to As(V).

Into the polymer brush regime through the "grafting-to" method: densely polymer-grafted rodlike viruses with an unusual nematic liquid crystal behavior.

The current work reports an intriguing discovery of how the force exerted on protein complexes like filamentous viruses by the strong interchain repulsion of polymer brushes can induce subtle changes of the constituent subunits at the molecular scale. Such changes transform into the macroscopic rearrangement of the chiral ordering of the rodlike virus in three dimensions. For this, a straightforward "grafting-to" PEGylation method has been developed to densely graft a filamentous virus with poly(ethylene glycol) (PEG). The grafting density is so high that PEG is in the polymer brush regime, resulting in straight and thick rodlike particles with a thin viral backbone. Scission of the densely PEGylated viruses into fragments was observed due to the steric repulsion of the PEG brush, as facilitated by adsorption onto a mica surface. The high grafting density of PEG endows the virus with an isotropic-nematic (I-N) liquid crystal (LC) phase transition that is independent of the ionic strength and the densely PEGylated viruses enter into the nematic LC phase at much lower virus concentrations. Most importantly, while the intact virus and the one grafted with PEG of low grafting density can form a chiral nematic LC phase, the densely PEGylated viruses only form a pure nematic LC phase. This can be traced back to the secondary to tertiary structural change of the major coat protein of the virus, driven by the steric repulsion of the PEG brush. Quantitative parameters characterising the conformation of the grafted PEG derived from the grafting density or the I-N LC transition are elegantly consistent with the theoretical prediction.

Formation of iron (hydr)oxides during the abiotic oxidation of Fe(II) in the presence of arsenate.

Abiotic oxidation of Fe(II) is a common pathway in the formation of Fe (hydr)oxides under natural conditions, however, little is known regarding the presence of arsenate on this process. In hence, the effect of arsenate on the precipitation of Fe (hydr)oxides during the oxidation of Fe(II) is investigated. Formation of arsenic-containing Fe (hydr)oxides is constrained by pH and molar ratios of As:Fe during the oxidation Fe(II). At pH 6.0, arsenate inhibits the formation of lepidocrocite and goethite, while favors the formation of ferric arsenate with the increasing As:Fe ratio. At pH 7.0, arsenate promotes the formation of hollow-structured Fe (hydr)oxides containing arsenate, as the As:Fe ratio reaches 0.07. Arsenate effectively inhibits the formation of magnetite at pH 8.0 even at As:Fe ratio of 0.01, while favors the formation of lepidocrocite and green rust, which can be latterly degenerated and replaced by ferric arsenate with the increasing As:Fe ratio. This study indicates that arsenate and low pH value favor the slow growth of dense-structured Fe (hydr)oxides like spherical ferric arsenate. With the rapid oxidation rate of Fe(II) at high pH, ferric (hydr)oxides prefer to precipitate in the formation of loose-structured Fe (hydr)oxides like lepidocrocite and green rust.

Reductive dissolution of ferrihydrite with the release of As(V) in the presence of dissolved S(-II).

In this study, reductive dissolution of As(V)-ferrihydrite and the mobilization of As(V) in the presence of S(-II) were investigated under anoxic conditions. Mobilization of As(V) strongly depended on the S(-II):Fe ratio and the amount of As(V) loading on ferrihydrite. High S(-II):Fe ratio caused a more complete dissolution of ferrihydrite and a large fraction of As(V) could be released into solution. The percentages of the released As(V) were 2.5% and 7.5% at S(-II):Fe ratios of 0.240 and 24.0, respectively, at pH 6.1, while the released As(V) were 5.5%, 16.3% at pH 8.0 under similar conditions. As(V) loading showed a negative effect on the release of arsenate, with smaller fraction of arsenate released into solution when more As (V) adsorbed on ferrihydrite. After 43 h, 14.1%, 5.5%, 1.6% and 0.7% of As(V) were released as for 10, 20, 50 and 100 mg L(-1) of As(V) loading, respectively, at pH 8.0. During the dissolution, secondary minerals such as goethite, magnetite and FeS were detected and played different roles in the mobilization of As(V). The released As(V) was mainly repartitioned on the residual ferrihydrite, the newly-formed goethite and magnetite but not FeS.

Response surface optimization of ultrasound-assisted enzymatic extraction polysaccharides from Lycium barbarum.

In this study, an efficient ultrasound-assisted enzymatic extraction procedure for the water-soluble polysaccharides from the fruit of Lycium barbarum was investigated and optimized. Response surface methodology (RSM) based on a three-level four-factor Box Behnken Design (BBD) was employed to optimize the extraction conditions inlcluding extraction time, ultrasonic output power, cellulose concentration and extraction temperature. The experimental data were adequately fitted into a second-order polynomial model. The optimized conditions were as follows: extraction time 20.29 min, ultrasonic output power 78.6 W, cellulose concentration 2.15%, extraction temperature 55.79°C. Under these conditions, the experimental yield of polysaccharides was 6.31±0.03%, which matched with the predictive yield of 6.32% well.

Drying effects on the antioxidant properties of polysaccharides obtained from Agaricus blazei Murrill.

Three polysaccharides (ABMP-F, ABMP-V, ABMP-A) were obtained from Agaricus blazei Murrill via methods such as freeze drying, vacuum drying and air drying, respectively. Their chemical compositions were examined, and antioxidant activities were investigated on the basis of assay for hydroxyl radical, DPPH radical, ABTS free radical scavenging ability and assay for Fe(2+)-chelating ability. Results showed that the three ABMPs have different physicochemical and antioxidant properties. Compared with air drying and vacuum drying methods, freeze drying method resulted to ABMP with higher neutral sugar, polysaccharide yield, uronic acid content, and stronger antioxidant abilities of hydroxyl radical, DPPH radical, ABTS radical scavenging and Fe(2+)-chelating. As a result, Agaricus blazei Murrill polysaccharides are natural antioxidant and freeze drying method serves as a good choice for the preparation of such polysaccharides and should be used to produce antioxidants for food industry.

Mobilization and re-adsorption of arsenate on ferrihydrite and hematite in the presence of oxalate.

In this study, mobilization and re-adsorption of arsenate on 2-line ferrihydrite and hematite in the presence of oxalate was investigated. Our results showed that arsenate could be mobilized during the dissolution of ferrihydrite and hematite. After reaching the maximum values, the released arsenate could re-adsorb on the residual ferrihydrite, whereas such an observation was not significant in hematite system. More reactive sites exposed during the dissolution of ferrihydrite could contribute to the re-adsorption of the released arsenate at pH 3.0, while the insignificant re-adsorption of arsenate on hematite could be explained by the inhibitory adsorption effect of oxalate on arsenate. Although dissolution rates of iron oxides decreased with the increase of arsenate on both ferrihydrite and hematite, dissolution rate was mainly determined by the reactivity of iron oxides, and ferrihydrite showed a higher reactivity than hematite in the presence of oxalate. Mathematic model proposed in our study further indicated that arsenate loading showed a more significant effect on arsenate mobilization in hematite system, while it was more effective in arsenate re-adsorption in ferrihydrite system.

Adsorptive removal of dibenzothiophene from model fuels over one-pot synthesized PTA@MIL-101(Cr) hybrid material.

Hybrid nanomaterials comprising phosphotungstic acid (PTA) and MIL-101(Cr) were prepared through one-pot synthesis and post-modification methods and then were used as adsorbents of dibenzothiophene (DBT) from simulated diesel fuels. Samples obtained by different ways (encapsulation and impregnation) were characterized by nitrogen adsorption, transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectrum (FT-IR) and series of adsorption experiments. The equilibrium adsorption capacities of PTA@MIL-101(Cr) illustrated that the direct introduction of PTA into MIL-101(Cr) during synthesis resulted in a 10.7% increase compared with MIL-101(Cr). However, porous hybrid adsorbent PTA/MIL-101(Cr) prepared via post-modification method exhibited lower adsorption capacity than virgin MIL-101(Cr). The theoretical maximum adsorption capacity (Q0) of PTA@MIL-101(Cr) is 136.5mg S/g adsorbent, 4.2 times of MIL-101(Cr). Even in competitive adsorption between aromatic compounds, which possess strong affinity with MOFs, and DBT, PTA@MIL-101(Cr) and MIL-101(Cr) remained their effectiveness in removal of DBT in the system. Based on these results, it can be presumed that MIL-101(Cr), modified properly, can be used as a promising adsorbent for eliminating aromatics and S-compounds in commercial fuels simultaneously.

Effects of extraction methods on the antioxidant activities of polysaccharides from Agaricus blazei Murrill.

Five polysaccharides were obtained from Agaricus blazei Murrill (ABM) through different extraction methods including hot water extraction, single enzyme extraction (pectinase, cellulase or papain) and compound enzymes extraction (cellulase:pectinase:papain). Their characteristics such as the polysaccharide yield, polysaccharide content, protein content, infrared spectra were determined, and antioxidant activities were investigated on the basis of hydroxyl radical, DPPH free radical, ABTS free radical and reducing power. The results showed that five extracts exhibited antioxidant activities in a concentration-dependent manner. Compared with other methods, the compound enzymes extraction method was found to present the highest polysaccharides yield (17.44%). Moreover, compound enzymes extracts exhibited the strongest reducing power and highest scavenging rates on hydroxyl radicals, DPPH radicals and ABTS radicals. On the contrary, hot water extraction method had the lowest polysaccharides yield of 11.95%, whose extracts also exhibited the lowest antioxidant activities. Overall, the available data obtained in vitro models suggested that ABM extracts were natural antioxidants and compound enzymes extraction was an appropriate, mild and effective extracting method for obtaining the polysaccharide extracts from Agaricus blazei Murrill (ABM).