ABSTRACT
The commercial application of lithium-sulfur (Li-S) batteries has faced obstacles, including challenges related to low sulfur utilization, structural degradation resulting from electrode volume expansion, and migration of polysulfide lithium (LiPSs). Herein, Co1-xS/3D-Ti3C2Tx composites with three-dimensional (3D) multilayered structures are used as separator modification materials for Li-S batteries to solve these problems. The multilevel layered structure of Co1-xS/3D-Ti3C2Tx establishes an efficient electron and Li+ transfer path, alleviates the volume change during the battery charge-discharge process, and enhances the stability of the structure. In addition, the battery assembled with the modified separator shows excellent discharge capacity and cycle stability at 0.5 C and could maintain a high discharge capacity after 500 cycles. This work provides a method for designing highly dispersed metal sulfide nanoparticles on MXenes and extends the application of MXenes-based composites in electrochemical energy storage.
ABSTRACT
Lithium-sulfur (Li-S) batteries are regarded as highly prospective energy storage devices. However, problems such as low sulfur utilization, poor cycle performance, and insufficient rate capability hinder the commercial development of Li-S batteries. Three-dimensional (3D) structure materials have been applied to modify the separator of Li-S batteries to suppress the diffusion of lithium polysulfides (LiPSs) and inhibit the transmembrane diffusion of Li+. A vanadium sulfide/titanium carbide (VS4/Ti3C2Tx) MXene composite with a 3D conductive network structure has been synthesized in situ by a simple hydrothermal reaction. VS4 is uniformly loaded on the Ti3C2Tx nanosheets through vanadium-carbon(V-C) bonds, which effectively inhibits the self-stacking of Ti3C2Tx. The synergistic action of VS4 and Ti3C2Tx substantially reduces the shuttle of LiPSs, improves interfacial charge transfer, and boosts the kinetics of LiPSs conversion, consequently increasing the rate performance and cycle stability of the battery. The assembled battery has a specific discharge capacity of 657 mAhg-1 after 500 cycles at 1C, with a high capacity retention rate of 71%. The construction of VS4/Ti3C2Tx composite with a 3D conductive network structure provides a feasible strategy for the application of polar semiconductor materials in Li-S batteries. It also provides an effective solution for the design of high-performance Li-S batteries.
ABSTRACT
The development of graphitic carbon materials as anodes of sodium-ion batteries (SIBs) is greatly restricted by their inherent low specific capacity. Herein, nitrogen and sulfur co-doped 3D graphene frameworks (NSGFs) were successfully synthesized via a simple and facile one-step hydrothermal method and exhibited high Na storage capacity in ether-based electrolytes. A systematic comparison was made between NSGFs, undoped graphene frameworks (GFs) and nitrogen-doped graphene frameworks (NGFs). It is demonstrated that the high specific capacity of NSGFs can be attributed to the free diffusion of Na ions within the graphene layer and reversible reaction between -C-Sx-C- covalent chains and Na ions thanks to the large interplanar distance and the dominant -C-Sx-C- covalent chains in NSGFs. NSGF anodes, therefore, exhibit a high initial coulombic efficiency (ICE) (92.8%) and a remarkable specific capacity of 834.0 mA h g-1 at 0.1 A g-1. Kinetic analysis verified that the synergetic effect of N/S co-doping not only largely enhanced the Na ion diffusion rate but also reduced the electrochemical impedance of NSGFs. Postmortem techniques, such as SEM, ex situ XPS, HTEM and ex situ Raman spectroscopy, all demonstrated the extremely physicochemically stable structure of the 3D graphene matrix and ultrathin inorganic-rich solid electrolyte interphase (SEI) films formed on the surface of NSGFs. Yet it is worth noting that the Na storage performance and mechanism are exclusive to ether-based electrolytes and would be inhibited in their carbonate ester-based counterparts. In addition, the corrosion of copper foils under the synergetic effect of S atoms and ether-based electrolytes was reported for the first time. Interestingly, by-products derived from this corrosion could provide additional Na storage capacity. This work sheds light on the mechanism of improving the electrochemical performance of carbon-based anodes by heteroatom doping in SIBs and provides a new insight for designing high-performance anodes of SIBs.
ABSTRACT
Monoclinic BiVO(4) crystals with preferentially exposed (040) facets were hydrothermally synthesized by using a trace amount of TiCl(3) as the directing agent; this function was confirmed by X-ray diffraction patterns (XRD) and high-resolution transmission electron microscopy (HRTEM). The effects of the directing agent TiCl(3) and the pH values applied during synthesis have been studied, and the optimized BiVO(4) sample with highly exposed (040) facet could be obtained by using 1.2 at.% of TiCl(3) as the directing agent at a pH value of 2. Some complementary techniques were also applied to exclude the effects of the structural and physical property changes, such as surface area and hydrophilicity. The photocatalytic activity of oxygen evolution on BiVO(4) is found to be proportionally correlated with the exposed surfaces of the (040) facet. It is assumed that the active sites with a BiV(4) structure on the exposed (040) facet is assigned to be responsible for the high activity of O(2) evolution.
