Clinical efficacy of a two-piece abutment conforming to the concept of one abutment one time in the posterior region: A clinical pilot study.

OBJECTIVES: To assess the impact of a two-piece abutment workflow on enhancing the stability of the alveolar bone and gingiva surrounding the dental implant, and to determine the level of patient satisfaction. MATERIALS AND METHODS: A total of 48 patients with dentition defect in the posterior region were included and divided into two groups: the two-piece abutment workflow (TAW) and the sealing screw with submerged healing workflow (SHW). Marginal bone level (MBL), soft tissue indicators, oral hygiene indicators, and patient satisfaction were assessed and recorded partially at 0, 3, 6, and 12 months after surgery. The primary outcome was the change of MBL in different time periods. A generalized linear mixed model (GLMM) was used to take into account the correlated nature of the data, and adjust for potential confounding factors within inter-group differences. RESULTS: The survival rate of implants and prosthesis reached 100% at 12-month follow-up, with an average decrease of 0.25 mm (SD 0.23 mm) of MBL in the TAW group and 0.48 mm (SD 0.45 mm) in the SHW group. The change of MBL in the TAW group (0.15 ± 0.31 mm) was significantly lower than the SHW group (0.41 ± 0.41 mm) through the analysis of GLMM within 6 months, while no significance was found in 12 months. Moreover, less gingival pain and oppression during prosthesis loading, and less time consumption overall duration were showed in the TAW group through Visual Analogue Scale (VAS, p < 0.05). CONCLUSIONS: Within a 6-month period, the two-piece abutment workflow showed superior efficacy in preserving the integrity of the marginal bone level. Furthermore, it streamlined treatment procedures and mitigated discomfort, hence increasing patient satisfaction.

Two Fluorescent Probes for Recognition of Acetylcholinesterase: Design, Synthesis, and Comparative Evaluation.

In this study, two "on-off" probes (BF2-cur-Ben and BF2-cur-But) recognizing acetylcholinesterase (AChE) were designed and synthesized. The obtained probes can achieve recognition of AChE with good selectivity and pH-independence with a linear range of 0.5~7 U/mL and 0.5~25 U/mL respectively. BF2-cur-Ben has a lower limit of detection (LOD) (0.031 U/mL), higher enzyme affinity (Km = 16 ± 1.6 µM), and higher inhibitor sensitivity. A responsive mechanism of the probes for AChE was proposed based on HPLC and mass spectra (MS) experiments, as well as calculations. In molecular simulation, BF2-cur-Ben forms more hydrogen bonds (seven, while BF2-cur-But has only four) and thus has a more stable enzyme affinity, which is mirrored by the results of the comparison of Km values. These two probes could enable recognition of intracellular AChE and probe BF2-cur-Ben has superior cell membrane penetration due to its higher log p value. These probes can monitor the overexpression of AChE during apoptosis of lung cancer cells. The ability of BF2-cur-Ben to monitor AChE in vivo was confirmed by a zebrafish experiment.

Metabolic profiling of peri-implant crevicular fluid in peri-implantitis.

OBJECTS: This study aims to explore the etiology of peri-implantitis by comparing the metabolic profiles in peri-implant crevicular fluid (PICF) from patients with healthy implants (PH) and those with peri-implantitis (PI). MATERIALS AND METHODS: Fifty-six patients were enrolled in this cross-sectional study. PICF samples were collected and analyzed using both non-targeted and targeted metabolomics approaches. The relationship between metabolites and clinical indices including probing depth (PD), bleeding on probing (BOP), and marginal bone loss (MBL) was examined. Additionally, submucosal microbiota was collected and analyzed using 16S rRNA gene sequencing to elucidate the association between the metabolites and microbial communities. RESULTS: Significant differences in metabolic profiles were observed between the PH and PI groups, with 179 distinct metabolites identified. In the PI group, specific amino acids and fatty acids were significantly elevated compared to the PH group. Organic acids including succinic acid, fructose-6-phosphate, and glucose-6-phosphate were markedly higher in the PI group, showing positive correlations with mean PD, BOP, and MBL. Metabolites that increased in the PI group positively correlated with the presence of Porphyromonas and Treponema and negatively with Streptococcus and Haemophilus. CONCLUSIONS: This study establishes a clear association between metabolic compositions and peri-implant condition, highlighting enhanced metabolite activity in peri-implantitis. These findings open avenues for further research into metabolic mechanisms of peri-implantitis and their potential therapeutic implications.

Additive manufacturing of dental ceramics in prosthodontics: The status quo and the future.

PURPOSE: This review aims to summarize the available technologies, material categories, and prosthodontic applications of additive manufacturing (AM) dental ceramics, evaluate the achievable accuracy and mechanical properties in comparison with current mainstream computer-aided design/computer-aided manufacturing (CAD/CAM) subtractive manufacturing (SM) methods, and discuss future prospects and directions. STUDY SELECTION: This paper is based on the latest reviews, state-of-the-art research, and existing ISO standards on AM technologies and prosthodontic applications of dental ceramics. PubMed, Web of Science, and ScienceDirect were amongst the sources searched for narrative reviews. RESULTS: Relatively few AM technologies are available and their applications are limited to crowns and fixed partial dentures. Although the accuracy and strength of AM dental ceramics are comparable to those of SM, they have the limitations of relatively inferior curved surface accuracy and low strength reliability. Furthermore, functionally graded additive manufacturing (FGAM), a potential direction for AM, enables the realization of biomimetic structures, such as natural teeth; however, specific studies are currently lacking. CONCLUSIONS: AM dental ceramics are not sufficiently developed for large-scale clinical applications. However, with additional research, it may be possible for AM to replace SM as the mainstream manufacturing technology for ceramic restorations.

Clinical outcomes and risk factor analysis of dental implants inserted with lateral maxillary sinus floor augmentation: A 3- to 8-year retrospective study.

AIM: To evaluate the 3- to 8-year outcomes of dental implants placed with lateral sinus floor augmentation (LSFA) and to identify factors affecting implant survival. MATERIALS AND METHODS: This retrospective study was performed by screening all implants placed with LSFA procedures, which were conducted between January 2012 and December 2016. Subantral bone gain (SABG) and apical bone height (ABH) were assessed using panoramic radiographs. The cumulative survival rate of implants was analysed using life-table analysis and Kaplan-Meier survival curves. The influential risk factors affecting survival were assessed using univariate log-rank tests and multivariable mixture cure rate model. Implant complications were recorded. RESULTS: Based on the established criteria, a total of 449 patients (760 implants) were included in this study. In the 3- to 8-year follow-up (mean ± SD, 5.81 ± 1.33 years), 15 implants in 14 patients failed, with a CRS of 96.81% on an implant basis and 95.07% on a patient basis. A history of periodontitis and poor compliance with supportive periodontal treatment was associated with a significantly higher risk of implant failure at both implant and patient levels. Significant decreases in ABH occurred during each yearly interval except for 3 years. A similar trend has been observed for SABG at 1, 2, 6 and 8 years. The total complication rate was 31.84% on implant basis, with peri-implant mucositis (21.58%) being the most frequent biologic complication and porcelain cracking (5.00%) being the most common technical complication. CONCLUSIONS: Implant with LSFA is a reliable treatment option in atrophic maxilla. A history of periodontitis without regular supportive periodontal treatment was identified as a predictor for implant failure. Slight but significant shrinkage of vertically augmented bone can be observed after implant placement.

Remineralization of Dentin with Cerium Oxide and Its Potential Use for Root Canal Disinfection.

Objective: This study was to investigate a novel antibacterial biomimetic mineralization strategy for exploring its potential application for root canal disinfection when stabilized cerium oxide was used. Material and Methods: A biomimetic mineralization solution (BMS) consisting of cerium nitrate and dextran was prepared. Single-layer collagen fibrils, collagen membranes, demineralized dentin, and root canal system were treated with the BMS for mineralization. The mineralized samples underwent comprehensive characterization using various techniques, including transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and micro-CT. Additionally, the antimicrobial properties of the BMS and the remineralized dentin were also analyzed with broth microdilution method, live/dead staining, and SEM. Results: Cerium ions in the BMS underwent a transformation into cerium oxide nanoparticles, which were deposited in the inter- and intra-fibrillar collagen spaces through a meticulous bottom-up process. XPS analysis disclosed the presence of both Ce (III) and Ce (IV) of the generated cerium oxides. A comprehensive examination utilizing SEM and micro-CT identified the presence of cerium oxide nanoparticles deposited within the dentinal tubules and lateral canals of the root canal system. The BMS and remineralized dentin exhibited substantial antibacterial efficacy against E. faecalis, as substantiated by assessments involving the broth dilution method and live/dead staining technique. The SEM findings revealed the cell morphological changes of deceased E. faecalis. Conclusion: This study successfully demonstrated antibacterial biomimetic mineralization as well as sealing dentinal tubules and lateral branches of root canals using cerium nitrate and dextran. This novel biomimetic mineralization could be used as an alternative strategy for root canal disinfection.

Accuracy and margin quality of advanced 3D-printed monolithic zirconia crowns.

STATEMENT OF PROBLEM: Nanoparticle jetting (NPJ) is a novel ceramic 3D-printing technology with high printing accuracy. However, studies reporting the accuracy of zirconia crowns manufactured by NPJ and comparing them with conventional zirconia crowns are lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the trueness, crown fit, and margin quality of monolithic zirconia crowns manufactured by NPJ with those milled by a computer numerical control system. MATERIAL AND METHODS: A gypsum left mandibular first molar was prepared and scanned with an intraoral scanner (TRIOS 4). Three types of monolithic crowns were manufactured through 3D printing and subtractive manufacturing (SM): NPJ (3D printing), VITA (milling), UPCERA (milling). The crowns were scanned, and the dimensional deviation (trueness) was evaluated and compared by using a software program. The triple scan method was used to measure crown fit and uniform index through precise alignment in the software program, and margin quality was also observed with an optical microscope. The data were analyzed with 1-way analysis of variance and the Tukey post hoc test (α=.05). RESULTS: The NPJ group reported better trueness of all crown and axial surfaces compared with the other SM group (P<.001), but marginal trueness (P=.601), intaglio surface (P=.596), and occlusal surface (P=.641) were statistically similar compared with the Vita milled group. All 3 groups reported clinically acceptable crown fit and uniformity with statistically similar values (P>.05). The NPJ group had more crowns judged to have flawless margin quality compared with the milled groups. CONCLUSIONS: All 3 manufacturing methods can fabricate zirconia crowns with a clinically acceptable crown fit. The NPJ system could be used to manufacture monolithic zirconia crowns with better margin quality and proximal surface trueness than milled crowns.

Clinical effect of Nobel Biocare angulated screw channel crown compared with cement crown in the aesthetic area: A retrospective cohort study with a mean 32 months follow-up (range 12 to 70 months).

OBJECTIVE: The objective of this study is to compare the clinical efficacy of angulated screw channel abutment applied in the anterior area with regular cemented crowns. MATERIALS AND METHODS: Forty-eight patients were included and divided into two groups: the angulated screw channel group (ASC) and regular cemented group (RC) in this retrospective cohort study. The evaluation criteria included implant/restoration survival rate, keratinized mucosa width (KMW), bleeding on probing rate (BOP%), probing depth (PD), pink aesthetic score (PES), mechanical/biological complications, emergence angle (EA), the site of implant axis penetrate (SA), marginal bone loss (MBL), and buccal bone thickness (BBT) at 0 mm, 1 mm, 3 mm, 5 mm below the implant shoulder were evaluated in immediate postoperative (T0) and follow-up period (T1). RESULTS: This retrospective cohort study included a total of 48 patients, with a mean 32 months follow-up period range from 12 months to 70 months. The study did not find any cases of implant failure or restoration failure. EA was significantly wider in the RC group than ASC group (RC: 33.53° ± 8.36° vs ASC: 27.43° ± 8.08°, p = 0.016*). While the BOP% was statistically significant higher in the RC group than ASC group (RC: 28.35% ± 22.92% vs ASC: 13.18% ± 20.00%, p = 0.027*). No significant differences were observed in the other measurements of comparison. CONCLUSION: Within the limitations of the study, angulated screw channel (Nobel Biocare) crowns might allow the implant axis aim at incisal edge to reduce the emergence angle in the anterior area and benefit the soft-tissue during the 12-70 months follow-up period.

Clinical and patient-centered outcomes following rehabilitation of atrophic edentulous maxilla using six implants placed simultaneously with bilateral maxillary sinus augmentation: A retrospective case series.

OBJECTIVES: To evaluate treatment success, patient satisfaction, and oral health-related quality of life (OHRQoL) after rehabilitation of atrophic edentulous maxilla (AEM) with six implants placed simultaneously with bilateral maxillary sinus floor augmentation (MSFA). MATERIALS AND METHODS: The selected patients were fully edentulous with atrophic maxillary posterior residual ridges and rehabilitated with six implants placed simultaneously with bilateral MSFA and immediate All-on-4 provisional fixed prosthesis (PFP). After 7-12 months of implant surgery, all patients have received an All-on-6 definitive fixed prosthesis (DFP). After at least one year of function with DFP, clinical and radiographic examinations were performed. Patient satisfaction was assessed through a visual analog scale (VAS). The OHRQoL before treatment (T0), during provisional (T1), and after definitive prosthesis (T2) was evaluated using OHI-14. RESULTS: 20 maxillary edentulous patients were rehabilitated with 120 implants, 20 immediate All-on-4 PFP, and 20 All-on-6 DFP. Of those, 12 patients have passed at least a year follow-up after DFP insertion and were eligible to be included in the assessment of treatment success. After a mean of 20 (12-36) months follow-up, the implant and prosthesis survival rates were 100%. The success rate at the implant level was 98.6%. The mean marginal bone loss (MBL) was 0.09 ± 0.06 mm. No prosthetic or postoperative complications, and the mean general satisfaction was (91.75 ± 7.06). There was a significant improvement in all OHIP-14 domains during the final All-on-6 prosthesis (T2) (P < 0.01). CONCLUSIONS: Rehabilitation of atrophic edentulous maxilla using six implants with simultaneous bilateral MSFA and immediate All-on-4 PFP is a successful treatment approach associated with minimal postoperative complications and significant improvement in OHRQoL.

Network pharmacology strategy to investigate the pharmacological effects of Suanzaoren Decoction on insomnia

Abstract Suanzaoren Decoction (SZRD) is an ancient prescription used in the treatment of insomnia. This study aimed to investigate the components and targets of SZRD in treating insomnia. First, the compounds of five herbs in SZRD were collected from the Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform (TCMSP), and the putative targets for treating insomnia were obtained from DrugBank to construct the herb-compound-target- disease network. A protein-protein interaction (PPI) network was constructed in the STRING database, and then Gene Ontology functional enrichment and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis were performed to predict the mechanism of action of intersection target. Finally, 30 mice were divided into five groups: control, model, and quercetin groups (100, 50, 25 mg/kg). The sleep latency and duration of pentobarbital-induced sleeping were measured. The production of interleukin-6 (IL-6) and γ-aminobutyric acid (γ-GABA) was detected by using an enzyme-linked immunosorbent assay kit (ELISA), and Gamma-aminobutyric acid type a receptor subunit alpha1 (GABRA1) was tested by Reverse Transcription-Polymerase Chain Reaction (RT-PCR). A total of 152 active ingredients, including 80 putative targets of SZRD, were obtained. The main active compounds included quercetin and kaempferol, and the key targets involved IL-6 and nitric oxide synthase 3 (NOS3). The results of pathway enrichment analysis indicated that the putative targets of SZRD mainly participated in Neuroactive ligand-receptor interaction. The experiment of P-chlorophenylalanine (PCPA)-induced insomnia model showed that quercetin obviously shortened the sleep latency and prolonged the sleep duration of the insomnia model. The production of IL-6, γ-GABA, and GABRA1 mRNA was significantly increased in mice treated with quercetin. This study predicted the active ingredients and potential targets of SZRD on insomnia on the basis of a systematic network pharmacology approach and illustrated that SZRD might exert hypnotic effects via regulating IL-6, γ-GABA, and GABRA1

The Characteristics of Microbiome and Cytokines in Healthy Implants and Peri-Implantitis of the Same Individuals.

AIM: To characterize the profile of submucosal microbiome and cytokine levels in peri-implant crevicular fluid (PICF) from clinically healthy implants and peri-implantitis in the same individuals. MATERIAL AND METHODS: A total of 170 patients were screened and, finally, 14 patients with at least one healthy implant and one peri-implantitis implant were included. Submucosal microbiota and cytokines from 28 implants were analyzed using 16S rRNA gene sequencing and multifactor assays, respectively. Correlations of clinical indexes and microbiota or cytokines were analyzed using Spearman's correlation coefficient. A random forest classification model was constructed. RESULTS: Peri-implantitis sites harbored higher microbial diversity, as well as more Gram-negative bacteria and anaerobic bacteria, compared with healthy implants sites. The genera of Peptostreptococcaceae XIG-1, Treponema, Porphyromonas, and Lachnospiraceae G-8, as well as the cytokines of IL-17A, IL-6, IL-15, G-CSF, RANTES, and IL-1ß were significantly higher in peri-implantitis than healthy implants. Furthermore, these genera and cytokines had positive relationships with clinical parameters, including probing depth (PD), bleeding on probing (BOP), and marginal bone loss (MBL). The classification model picked out the top 15 biomarkers, such as IL-17A, IL-6, IL-15, VEGF, IL-1ß, Peptostreptococcaceae XIG-1, Haemophilus, and Treponema, and obtained an area under the curve (AUC) of 0.85. CONCLUSIONS: There are more pathogenic bacteria and inflammatory cytokines in peri-implantitis sites, and biomarkers could facilitate the diagnosis of peri-implantitis.

Improved osseointegration of strontium-modified titanium implants by regulating angiogenesis and macrophage polarization.

Strontium (Sr) has shown strong osteogenic potential and thereby been widely incorporated into dental and orthopedic implants. However, the improved osseointegration of strontium-modified titanium implants through regulation of angiogenesis and macrophage polarization is still beginning to be explored. Here, we demonstrated that the angiogenic capacity of human umbilical vein endothelial cells on the Sr-incorporated micro/nano titanium (SLA-Sr) surface was also significantly improved through the up-regulated expression of the HIF-1α protein and Erk1/2 phosphorylation. Meanwhile, SLA-Sr not only switched macrophage polarization towards the M2 phenotype, but also expressed a high level of pro-angiogenic platelet-derived growth factor. Furthermore, macrophage secretion induced by SLA-Sr was also capable of enhancing angiogenesis of human umbilical vein endothelial cells. In vivo experimental results also showed early vascularized implant osseointegration of SLA-Sr with the type H vessel formation around the SLA-Sr implant. This study emphasized the synergistic role of Sr in the regulation of macrophage polarization and angiogenesis, and therefore depicted the therapeutic potential of SLA-Sr for rapidly vascularized osseointegration.

A ceRNA-associated risk model predicts the poor prognosis for head and neck squamous cell carcinoma patients.

Head and neck squamous cell carcinoma (HNSCC) is one of the most malignant cancers with poor prognosis worldwide. Emerging evidence indicates that competing endogenous RNAs (ceRNAs) are involved in various diseases, however, the regulatory mechanisms of ceRNAs underlying HNSCC remain unclear. In this study, we retrieved differentially expressed long non-coding RNAs (DElncRNAs), messenger RNAs (DEmRNAs) and microRANs (DEmiRNAs) from The Cancer Genome Atlas database and constructed a ceRNA-based risk model in HNSCC by integrated bioinformatics approaches. Functional enrichment analyses showed that DEmRNAs might be involved in extracellular matrix related biological processes, and protein-protein interaction network further selected out prognostic genes, including MYL1 and ACTN2. Importantly, co-expressed RNAs identified by weighted co-expression gene network analysis constructed the ceRNA networks. Moreover, AC114730.3, AC136375.3, LAT and RYR3 were highly correlated to overall survival of HNSCC by Kaplan-Meier method and univariate Cox regression analysis, which were subsequently implemented multivariate Cox regression analysis to build the risk model. Our study provides a deeper understanding of ceRNAs on the regulatory mechanisms, which will facilitate the expansion of the roles on the ceRNAs in the tumorigenesis, development and treatment of HNSCC.

Vascular endothelial growth factor gene polymorphisms and coronary heart disease: a systematic review and meta-analysis.

We performed this study to better elucidate the relationship between vascular endothelial growth factor (VEGF) polymorphisms and coronary heart disease (CHD). Eligible articles were searched in PubMed, Medline, Embase, Scopus and CNKI. A total of 24 studies containing 6489 CHD patients and 5664 control subjects were analyzed. Our overall and subgroup analyses suggested that rs699947 polymorphism was significantly associated with CHD susceptibility in both Caucasians and Asians, rs1570360 polymorphism was significantly associated with CHD susceptibility in Caucasians, and rs3025039 polymorphism was significantly associated with CHD susceptibility in Asians. Besides, rs3025039 polymorphism was significantly correlated with the number of affected coronary arteries, while rs699947 and rs2010963 polymorphisms were significantly correlated with poor collateral circulation in CHD patients. Overall, our findings indicate that VEGF rs699947, rs1570360, and rs3025039 polymorphisms may affect CHD susceptibility. Moreover, VEGF rs699947 and rs2010963 polymorphisms may serve as genetic biomarkers of poor collateral circulation after myocardial ischemia.

Molecular characterization of elongase of very long-chain fatty acids 6 (elovl6) genes in Misgurnus anguillicaudatus and their potential roles in adaptation to cold temperature.

Elongase of very long-chain fatty acids 6 (ELOVL6) is a rate-limiting enzyme catalyzing elongation of saturated and monounsaturated long-chain fatty acid. Although functional characteristics of Elovl6 have been demonstrated in mammal, the role of elovl6 in fish remains unclear. In this study, we firstly cloned three isoforms of elovl6 (elovl6a, elovl6b and elovl6-like) from loach (Misgurnus anguillicaudatus). Molecular characterizations of the three elovl6 isoforms in loach and their expressions of early life stages and different tissues were then determined. We also functionally characterized the three elovl6 isoforms using heterologous expression in baker's yeast. Results obtained here showed the three elovl6 proteins in loach can elongate C16:0 and C16:1 to C18:0 and C18:1, respectively. At last, to confirm the role of three loach elovl6 isoforms for elongation of fatty acids in adaption to cold stress, differences in skin histological structures, body fatty acid compositions, expressions of four hepatic lipogenesis or lipolysis related genes, and expressions of the three elovl6 isoforms and their related gene uncoupling protein 1 (ucp1) in different tissues were investigated in the loach reared in two different water temperatures (28 °C and 4 °C) for ten days. Cold stress increased ratios of C18/C16 and C20:5n-3/C18:3n-3 in loach body, and induced expressions of hepatic acyl-CoA delta-9 desaturase 1 (scd1), sterol-regulator element-binding protein 1 (srebp1), carnitine palmitoyltransferase 1 (cpt1) and fatty acid synthase (fas). Meanwhile, significant differences were found in expressions of the three elovl6 isoforms in different tissues between 28 °C and 4 °C groups. Overall, this study suggests that the three elovl6 isoforms in loach have ability to elongate C16 to C18, and elovl6 proteins in loach may play a role in adaptation to cold stress.

[Target chemotherapy of intestinal nematode infection in area with low endemicity].

OBJECTIVE: To evaluate the control measures for intestinal nematodiasis in endemic area with low prevalence and intensity of infection. METHODS: Target chemotherapy was carried out in high-risk population based on the epidemiological characteristics such as age and clinical findings. Albendazole and mebendazole were administered each 200 mg once daily every year for 3 or 5 years. Saturated brine floatation and Kato-Katz thick smear techniques were used for stool examination to evaluate the efficacy of treatment. RESULTS: Two hundred residents from each of the three investigation villages were selected for target chemotherapy once a year for three years. The prevalence of intestinal nematodes decreased from 6.2% in 1995 to 5.4% in 1996 and 3.2% in 1997, and remained at 2.3% after three years in 2000. One control village where only primary school students were treated once a year for 5 years, the prevalence of Ascaris and Trichuris infection also decreased from 1.4% and 4.2% in 1995 to 0.9% and 1.4% in 2000, respectively. The target chemotherapy on the predisposed population to hookworm infection showed that the prevalence in the population above 41 years old was declined from 19.4% to 10.9%. CONCLUSION: The target chemotherapy is an economical and effective approach for the control of intestinal nematode infection in endemic area with low prevalence and intensity of infection.